Diamond Tools and Machines - English

More documents

Info

WIRE SAWING 148 DWM-C Diamond wire Electroplated | for concrete Application: + For machining lightly reinforced to non-reinforced concrete for daily use We recommend: + Application in combination with Tyrolit wire saws Features: + Excellent stock removal rate thanks to aggressive diamond grit + Good lifetime thanks to electroplated galvanisation for maximum safety and less wear + Stable and robust construction ensures stability and smooth running Type number Diameter Beads / m 34410842 10 40 DWH-S ATEX Diamond wire Electroplated | for steel Application: + For the machining of large-dimensioned steel or reinforced concrete during dismantling or demolition, also underwater + ATEX certified, therefore particularly suitable for critical areas such as the dismantling of offshore installations (special operation instructions apply) We recommend: + Application in combination with Tyrolit wire saws + For lengths from 2.9 - 82 m, the diamond wire is also available in a spliced design (SL) Features: + Excellent stock removal rate thanks to large and aggressive diamond grit + Excellent lifetime thanks to electroplated galvanisation for maximum safety and less wear + Stable, high-quality construction and a high number of beads ensure outstanding stability and smooth running + Maximum safety thanks to ATEX certification, even in explosionhazardous areas (special operation instructions apply) + Yellow colour for better visibility, especially under water Type number Diameter Beads / m 34053745 11.0 46
WIRE SAWING 149 DWH-S | SL Diamond wire Electroplated | for steel Application: + For machining large-dimensioned steel or reinforced concrete during dismantling or demolition, also underwater We recommend: + Application in combination with Tyrolit wire saws + For lengths from 2.9 - 82 m, the diamond wire is also available in a spliced design (SL) Features: + Excellent stock removal rate thanks to large and aggressive diamond grit + Stable, high-quality construction and a high number of beads ensure outstanding stability and smooth running + Yellow colour for better visibility, especially under water Type number Diameter Beads / m 34380722 11,0 46 NEW 34642085 11,0 46 Very long lifetime thanks to reinforced connection from bead to rubber DWM-S | SL Diamond wire Electroplated | for steel Application: + For machining large-dimensioned steel for general purpose and during demolition We recommend: + Application in combination with Tyrolit wire saws + For lengths from 2.9 - 82 m, the diamond wire is also available in a spliced design (SL) Features: + Excellent stock removal rate thanks to aggressive diamond grit + Stable, high-quality construction and a high number of beads ensure outstanding stability and smooth running Type number Diameter Beads / m 603261 10,2 46 NEW 34608052 10,2 46 Very long lifetime thanks to reinforced connection from bead to rubber
Page 1:
Diamond tools and machines for the
Page 4 and 5:
INTRODUCTION 2 The Tyrolit Group Ty
Page 6 and 7:
INTRODUCTION 4 Leading through true
Page 8 and 9:
QUALITY LINES 6 Quality lines Tyrol
Page 10 and 11:
EXPLANATION SHORT SPECIFICATION 8 S
Page 13:
Technology from page 12 TGD ® -Tec
Page 16:
OVERVIEW OF TECHNOLOGIES 14 Convinc
Page 19:
MODULAR SYSTEM 17 Modular component
Page 23 and 24:
Diamond wet drill bits
Page 25 and 26:
DIAMOND WET DRILL BITS 23 Speeds we
Page 27 and 28:
DIAMOND WET DRILL BITS 25 Applicati
Page 29 and 30:
DIAMOND WET DRILL BITS 27 Type no.
Page 31 and 32:
DIAMOND WET DRILL BITS 29 CDL-C2 We
Page 33 and 34:
DIAMOND WET DRILL BITS 31 CDXH Wet
Page 35 and 36:
DIAMOND WET DRILL BITS 33 CD840 Wet
Page 37 and 38:
DIAMOND WET DRILL BITS 35 Type no.
Page 39:
DIAMOND WET DRILL BITS 37 B1 Wet dr
Page 42 and 43:
DIAMOND WET DRILL BITS 40 Accessori
Page 44 and 45:
DIAMOND DRY DRILL BITS 42 Drill bit
Page 46 and 47:
DRY DRILLING SYSTEM 44 Dry drilling
Page 48 and 49:
DIAMOND DRY DRILL BITS 46 DDL-RM Dr
Page 50 and 51:
DIAMOND DRY DRILL BITS 48 Type no.
Page 52 and 53:
DIAMOND DRY DRILL BITS 50 DDL Dry d
Page 54 and 55:
DIAMOND DRY DRILL BITS 52 Compact u
Page 56 and 57:
DIAMOND DRY DRILL BITS 54 Centring
Page 58 and 59:
TILE DRILLING 56 DDT Tile drills fo
Page 60 and 61:
TILE DRILLING 58 Tile drill sets DD
Page 63 and 64:
Machines
Page 65 and 66:
SELECTING GUIDE FOR CORE DRILL SYST
Page 67 and 68:
SELECTING GUIDE FOR CORE DRILL SYST
Page 69 and 70:
MACHINES 67 System & Accessories Te
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
RR Radio Remote RR Radio Remote RRR
Page 85 and 86:
0 1 2 h 0000000 0 BW 40 0 1 2 h 000
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100: MACHINES 97 System & Accessories Te
Page 101 and 102: MACHINES 99 System & Accessories Te
Page 103 and 104: MACHINES 101 System & Accessories T
Page 113: MACHINES 111 System & Accessories G
Page 116 and 117: WALL SAWING 114 Wall saw blades Dec
Page 118 and 119: WALL SAWING 116 Selection Quality t
Page 120 and 121: WALL SAWING 118 WSL Wall saw blades
Page 122 and 123: WALL SAWING 120 SILENT Wall saw bla
Page 124 and 125: WALL SAWING 122 WSL-FAST CUT-LONG L
Page 126 and 127: WALL SAWING 124 WSL-DEEP CUT Wall s
Page 128: WALL SAWING 126 WSL Wall saw blades
Page 131 and 132: COMPATIBILITY OVERVIEW WALL SAWS 12
Page 143: MACHINES 141 System & Accessories T
Page 146 and 147: WIRE SAWING 144 Diamond wire Decade
Page 148 and 149: WIRE SAWING 146 DWM-CF Diamond wire
Page 152 and 153: WIRE SAWING 150 Diamond wire access
Page 154 and 155: COMPATIBILITY OVERVIEW WIRE SAWS 15
Page 156 and 157: MACHINES 154 Wire saw WCU17 Gross w
Page 158 and 159: MACHINES 156 Wire saw WCE18 Gross w
Page 160 and 161: MACHINES 158 Wire saw WCE30 Gross w
Page 162 and 163: MACHINES 160 Wire saw SB ATEX | SB-
Page 164 and 165: MACHINES 162 Circular wire saw CCH2
Page 167 and 168: Floor sawing Information 166 Floor
Page 169 and 170: FLOOR SAW BLADES 167 Application re
Page 171 and 172: FLOOR SAW BLADES FOR CURED CONCRETE
Page 173 and 174: FLOOR SAW BLADES FOR CURED CONCRETE
Page 175 and 176: FLOOR SAW BLADES FOR ASPHALT 173 FS
Page 177 and 178: FLOOR SAW BLADES FOR ASPHALT 175 FS
Page 179 and 180: FLOOR SAW BLADES FOR GREEN CONCRETE
Page 182 and 183: MACHINES 180 Floor saw FSG513 Cutti
Page 184 and 185: MACHINES 182 Floor saw FSG620 Cutti
Page 186 and 187: MACHINES 184 Floor saw FSE808 Cutti
Page 188 and 189: MACHINES 186 Floor saw FSE1022 Cutt
Page 190 and 191: MACHINES 188 Floor saw FSE1240 Cutt
Page 192 and 193: MACHINES 190 Floor saw FSD1274E5 3-
Page 195 and 196: Drives Machines 194
Page 201:
MACHINES 199 System & Accessories T
Page 205 and 206:
Dry cutting
Page 207 and 208:
DRY CUTTING 205 Materials Material
Page 209 and 210:
DRY CUTTING 207 Shape Type number D
Page 211 and 212:
DRY CUTTING 209 DCU dry cutting saw
Page 213 and 214:
DRY CUTTING 211 DCU-FAST CUT dry cu
Page 215 and 216:
DRY CUTTING 213 DCC-FAST CUT wall c
Page 217 and 218:
DRY CUTTING 215 DCA+C dry cutting s
Page 219 and 220:
DRY CUTTING 217 DCH dry cutting saw
Page 221 and 222:
DRY CUTTING 219 DCM dry cutting saw
Page 223 and 224:
DRY CUTTING 221 Sharpening plate fo
Page 225:
DRY CUTTING 223 DC-CVB dry cutting
Page 228 and 229:
DIAMOND CUP WHEELS 226 Diamond cup
Page 230 and 231:
DIAMOND CUP WHEELS 228 DGU Diamond
Page 232 and 233:
MACHINES 230 Angle grinder AGE125 B
Page 234 and 235:
MACHINES 232 Angle grinder AGE230 B
Page 236 and 237:
MACHINES 234 Wall chaser HCE150 Max
Page 238 and 239:
MACHINES 236 Handheld concrete grin
Page 241 and 242:
Hand- and ring sawing
Page 243 and 244:
HAND- AND RING SAW BLADES 241 Appli
Page 245 and 246:
HAND- AND RING SAW BLADES 243 RSL R
Page 247 and 248:
HAND- AND RING SAW BLADES 245 RSM /
Page 249 and 250:
Page 251:
Page 254 and 255:
TABLE SAWING 252 Diamond saw blades
Page 256 and 257:
TABLE SAWING 254 TSU Table saw blad
Page 258 and 259:
TABLE SAWING 256 F40 Table saw blad
Page 260 and 261:
MACHINES 258 Tile saw TTE250 Cuttin
Page 262 and 263:
MACHINES 260 Tile saw TRE250 Cuttin
Page 264 and 265:
MACHINES 262 Masonry saw CSE350D Cu
Page 266 and 267:
MACHINES 264 Masonry saw TBE400 Cut
Page 268 and 269:
MACHINES 266 Masonry saw TME700 Cut
Page 270 and 271:
MACHINES 268 Masonry saw TME1000 Cu
Page 272 and 273:
MACHINES 270 Cellular concrete band
Page 275 and 276:
Further applications Filter presses
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
MACHINES 281 Drive BW-2 Working pre
Page 285 and 286:
MOVESMART 283 MoveSmart modules In
Page 287:
FLOOR GRINDING AND SURFACE PREPARAT
Page 290 and 291:
TYROLIT PROJECT SERVICES 288 Tyroli
Page 293 and 294:
Notes Safety 292 POS 298 General 29
Page 295 and 296:
SAFETY 293 Application Avoid uninte
Page 298 and 299:
SAFETY 296 Trouble-shooting Diamond
Page 300 and 301:
Premium grinding tools since 1919 w
Page 302 and 303:
GENERAL 300
Page 304 and 305:
GENERAL 302
Page 306:
GENERAL 304 Catalogue General infor
show all

Diamond Tools and Machines - English

Create successful ePaper yourself

Delete template?

Save as template?