Diamond Tools and Machines - English

More documents

Info

HAND- AND RING SAW BLADES 244 RSL-C Ring saw blade for concrete | Ø 406 mm Machinable materials: Usage on reinforced or normal concrete with wall thicknesses of up to 300 mm (Ø 406 mm). Details: The ring saw blades have been optimised to work perfectly with the Tyrolit Hydrostress machines. With every replacement blade the wear plate is included and should also be replaced with each ring saw blade. Shape Type number Dimension Segment height Holes C1W 34506869 406 × 4.2 × 320 10 HRE410 + WEKA 34058668 406 × 3.9 × 326.78 10 HRE400 RSL-FAST CUT Ring saw blade for concrete | Ø 306 mm / Ø 406 mm Machinable materials: For fast cutting on reinforced or normal concrete with wall thicknesses of up to 300 mm (Ø 406 mm). Details: The ring saw blades have been optimised to work perfectly with the Tyrolit Hydrostress machines. With every replacement blade the wear plate is included and should also be replaced with each ring saw blade. Shape Type number Dimension Segment height Holes C1W 34258692 406 × 3.9 × 326.78 10 HRE400 34438701 406 × 3.9 × 320 10 HRE410 + WEKA RSM Ring saw blade for concrete | Ø 366 mm Machinable materials: Usage on reinforced or normal concrete with wall thicknesses of up to 260 mm. Details: Application in system with fuel operated, electric or hydraulic ring saw machines. With every replacement blade the wear plate is included and should also be replaced with each ring saw blade. Shape Type number Dimension Segment height Holes C1W 739887 366 × 4.2 × 288 10 Husqvarna = low = medium
HAND- AND RING SAW BLADES 245 RSM / RSM-FAST CUT Ring saw blades for concrete | Ø 425 mm | in TGD ® -Technology Machinable materials: Usage on reinforced or normal concrete. Details: For Husqvarna K7000 ring saws. With every replacement blade the wear plate is included and should also be replaced with each ring saw blade. Shape Type number Dimension Segment height Holes C1W 34556651 425 × 3.9 × 337.9 10 Husqvarna 34556652 425 × 3.9 × 337.9 10 Husqvarna Symbol image RSM-FAST CUT Ring saw blades for concrete | Ø 406 mm | in TGD ® -Technology Machinable materials: Usage on reinforced or unreinforced concrete. Details: Application in system with fuel operated, electric or hydraulic cut-off machines. The drive wheel should also be replaced each time the blade is changed, which is supplied with each ring saw blade. Form Typennummer Abmessung Segmenthöhe Holes C1W 34635929 406 x 3.9 x 320 10 HRE410
Page 1:
Diamond tools and machines for the
Page 4 and 5:
INTRODUCTION 2 The Tyrolit Group Ty
Page 6 and 7:
INTRODUCTION 4 Leading through true
Page 8 and 9:
QUALITY LINES 6 Quality lines Tyrol
Page 10 and 11:
EXPLANATION SHORT SPECIFICATION 8 S
Page 13:
Technology from page 12 TGD ® -Tec
Page 16:
OVERVIEW OF TECHNOLOGIES 14 Convinc
Page 19:
MODULAR SYSTEM 17 Modular component
Page 23 and 24:
Diamond wet drill bits
Page 25 and 26:
DIAMOND WET DRILL BITS 23 Speeds we
Page 27 and 28:
DIAMOND WET DRILL BITS 25 Applicati
Page 29 and 30:
DIAMOND WET DRILL BITS 27 Type no.
Page 31 and 32:
DIAMOND WET DRILL BITS 29 CDL-C2 We
Page 33 and 34:
DIAMOND WET DRILL BITS 31 CDXH Wet
Page 35 and 36:
DIAMOND WET DRILL BITS 33 CD840 Wet
Page 37 and 38:
DIAMOND WET DRILL BITS 35 Type no.
Page 39:
DIAMOND WET DRILL BITS 37 B1 Wet dr
Page 42 and 43:
DIAMOND WET DRILL BITS 40 Accessori
Page 44 and 45:
DIAMOND DRY DRILL BITS 42 Drill bit
Page 46 and 47:
DRY DRILLING SYSTEM 44 Dry drilling
Page 48 and 49:
DIAMOND DRY DRILL BITS 46 DDL-RM Dr
Page 50 and 51:
DIAMOND DRY DRILL BITS 48 Type no.
Page 52 and 53:
DIAMOND DRY DRILL BITS 50 DDL Dry d
Page 54 and 55:
DIAMOND DRY DRILL BITS 52 Compact u
Page 56 and 57:
DIAMOND DRY DRILL BITS 54 Centring
Page 58 and 59:
TILE DRILLING 56 DDT Tile drills fo
Page 60 and 61:
TILE DRILLING 58 Tile drill sets DD
Page 63 and 64:
Machines
Page 65 and 66:
SELECTING GUIDE FOR CORE DRILL SYST
Page 67 and 68:
SELECTING GUIDE FOR CORE DRILL SYST
Page 69 and 70:
MACHINES 67 System & Accessories Te
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
RR Radio Remote RR Radio Remote RRR
Page 85 and 86:
0 1 2 h 0000000 0 BW 40 0 1 2 h 000
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
MACHINES 101 System & Accessories T
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113:
MACHINES 111 System & Accessories G
Page 116 and 117:
WALL SAWING 114 Wall saw blades Dec
Page 118 and 119:
WALL SAWING 116 Selection Quality t
Page 120 and 121:
WALL SAWING 118 WSL Wall saw blades
Page 122 and 123:
WALL SAWING 120 SILENT Wall saw bla
Page 124 and 125:
WALL SAWING 122 WSL-FAST CUT-LONG L
Page 126 and 127:
WALL SAWING 124 WSL-DEEP CUT Wall s
Page 128:
WALL SAWING 126 WSL Wall saw blades
Page 131 and 132:
COMPATIBILITY OVERVIEW WALL SAWS 12
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143:
Page 146 and 147:
WIRE SAWING 144 Diamond wire Decade
Page 148 and 149:
WIRE SAWING 146 DWM-CF Diamond wire
Page 150 and 151:
WIRE SAWING 148 DWM-C Diamond wire
Page 152 and 153:
WIRE SAWING 150 Diamond wire access
Page 154 and 155:
COMPATIBILITY OVERVIEW WIRE SAWS 15
Page 156 and 157:
MACHINES 154 Wire saw WCU17 Gross w
Page 158 and 159:
MACHINES 156 Wire saw WCE18 Gross w
Page 160 and 161:
MACHINES 158 Wire saw WCE30 Gross w
Page 162 and 163:
MACHINES 160 Wire saw SB ATEX | SB-
Page 164 and 165:
MACHINES 162 Circular wire saw CCH2
Page 167 and 168:
Floor sawing Information 166 Floor
Page 169 and 170:
FLOOR SAW BLADES 167 Application re
Page 171 and 172:
FLOOR SAW BLADES FOR CURED CONCRETE
Page 173 and 174:
FLOOR SAW BLADES FOR CURED CONCRETE
Page 175 and 176:
FLOOR SAW BLADES FOR ASPHALT 173 FS
Page 177 and 178:
FLOOR SAW BLADES FOR ASPHALT 175 FS
Page 179 and 180:
FLOOR SAW BLADES FOR GREEN CONCRETE
Page 182 and 183:
MACHINES 180 Floor saw FSG513 Cutti
Page 184 and 185:
MACHINES 182 Floor saw FSG620 Cutti
Page 186 and 187:
MACHINES 184 Floor saw FSE808 Cutti
Page 188 and 189:
MACHINES 186 Floor saw FSE1022 Cutt
Page 190 and 191:
MACHINES 188 Floor saw FSE1240 Cutt
Page 192 and 193:
MACHINES 190 Floor saw FSD1274E5 3-
Page 195 and 196: Drives Machines 194
Page 197 and 198: MACHINES 195 System & Accessories T
Page 201: MACHINES 199 System & Accessories T
Page 205 and 206: Dry cutting
Page 207 and 208: DRY CUTTING 205 Materials Material
Page 209 and 210: DRY CUTTING 207 Shape Type number D
Page 211 and 212: DRY CUTTING 209 DCU dry cutting saw
Page 213 and 214: DRY CUTTING 211 DCU-FAST CUT dry cu
Page 215 and 216: DRY CUTTING 213 DCC-FAST CUT wall c
Page 217 and 218: DRY CUTTING 215 DCA+C dry cutting s
Page 219 and 220: DRY CUTTING 217 DCH dry cutting saw
Page 221 and 222: DRY CUTTING 219 DCM dry cutting saw
Page 223 and 224: DRY CUTTING 221 Sharpening plate fo
Page 225: DRY CUTTING 223 DC-CVB dry cutting
Page 228 and 229: DIAMOND CUP WHEELS 226 Diamond cup
Page 230 and 231: DIAMOND CUP WHEELS 228 DGU Diamond
Page 232 and 233: MACHINES 230 Angle grinder AGE125 B
Page 234 and 235: MACHINES 232 Angle grinder AGE230 B
Page 236 and 237: MACHINES 234 Wall chaser HCE150 Max
Page 238 and 239: MACHINES 236 Handheld concrete grin
Page 241 and 242: Hand- and ring sawing
Page 243 and 244: HAND- AND RING SAW BLADES 241 Appli
Page 245: HAND- AND RING SAW BLADES 243 RSL R
Page 251: MACHINES 249 System & Accessories T
Page 254 and 255: TABLE SAWING 252 Diamond saw blades
Page 256 and 257: TABLE SAWING 254 TSU Table saw blad
Page 258 and 259: TABLE SAWING 256 F40 Table saw blad
Page 260 and 261: MACHINES 258 Tile saw TTE250 Cuttin
Page 262 and 263: MACHINES 260 Tile saw TRE250 Cuttin
Page 264 and 265: MACHINES 262 Masonry saw CSE350D Cu
Page 266 and 267: MACHINES 264 Masonry saw TBE400 Cut
Page 268 and 269: MACHINES 266 Masonry saw TME700 Cut
Page 270 and 271: MACHINES 268 Masonry saw TME1000 Cu
Page 272 and 273: MACHINES 270 Cellular concrete band
Page 275 and 276: Further applications Filter presses
Page 283 and 284: MACHINES 281 Drive BW-2 Working pre
Page 285 and 286: MOVESMART 283 MoveSmart modules In
Page 287: FLOOR GRINDING AND SURFACE PREPARAT
Page 290 and 291: TYROLIT PROJECT SERVICES 288 Tyroli
Page 293 and 294: Notes Safety 292 POS 298 General 29
Page 295 and 296: SAFETY 293 Application Avoid uninte
Page 298 and 299:
SAFETY 296 Trouble-shooting Diamond
Page 300 and 301:
Premium grinding tools since 1919 w
Page 302 and 303:
GENERAL 300
Page 304 and 305:
GENERAL 302
Page 306:
GENERAL 304 Catalogue General infor
show all

Diamond Tools and Machines - English

Create successful ePaper yourself

Delete template?

Save as template?