KYCR Coil Industries Ltd. - Dhaka Stock Exchange

It is a similar process as CRCA product manufacturing except the input material which is RIM
grade HRC input, no rewinding, and it goes through CR Multi Slitter.
Process Flow Chart for CRFH Coil (End Use Galvanizing):
Pickling 6 HI Mill Rolling
Rewinding & Side
Trimming
DD/EDD Grade
HRC Input
To manufacture CRFH Products, rolling is carried out after pickling the raw materials and
following such, Rewinding & side trimming is carried out in order to produce the output.
Currently, the company is manufacturing CRFH, CRCA, GPFH, GP, and GCI products. It is
producing corrugated galvanized sheets from Cold Rolled (CR) Steel Sheets of various
thicknesses, length and width. Presently, the company has got four manual and an automatic
galvanizing lines with a total production capacity of about 70,000 MT of galvanized sheets of
various sizes per annum. GCI (Galvanized Corrugated) sheets are being widely used in
Bangladesh as roofing materials and also for making the sidewalls of the huts. Present annual
quantity of production of the company is approximately 60,000 Metric Tons of corrugated sheet.
The primary raw materials for production are Cold rolled sheet and Zinc to provide anticorrosive
coating on that sheet.
The CR (Cold Rolled) sheet is the product of Cold Rolling mill. Only few companies established
CR mills earlier in the country and KYCR was one of the followers. Previously, all the GCI sheet
manufacturers used to import CR sheet as raw material. Recently, few indigenous sources are
available for the CR Sheet. CR sheets are produced from HR (Hot Rolled) sheets which are the
output of full-fledged steel plant. Till date no such plant is available in the country and
companies manufacturing CR sheet, imports the HR sheet from foreign countries like Japan,
Thailand, China and Korea.
Details of Manufacturing of Products (Galvanized Products)
Corrugated galvanized sheet is fabricated from the Cold rolled steel sheet of varying
thicknesses. Some of the specifications of the HR Coil, being imported by the CR Plant are as
follows.
i) 1.6 mm x 800 mm
ii) 1.8 mm x 915 mm
iii) 2.0 mm x 915 mm
Output CRFH Coil
Packing