IJIFR VOLUME 3 ISSUE 12 AUGUST 2016

More documents

Recommendations

Info

ISSN: 2347-1697 International Journal of Informative & Futuristic Research (IJIFR) Volume - 3, Issue -12, August 2016 Continuous 36 th Edition, Page No: 4598-4605 2.2 Bearing: For our particular setup we used deep groove ball bearings that are going to primarily centralize the shaft, and a turntable bearing to take the majority of the weight. This combination will provide the least amount of friction, while maximizing bearing life and maintaining safe operating conditions. Figure 3: Bearing 2.3 Shaft. The Shaft is selected as Aluminium pipe which is vertical placed, which supports wind turbine and abrasive disc tool. It is shown in figure 4 Figure 4: Shaft 2.4 Blades The blades shown in the fig.5 are six blades and are curved. These types of blades are selected to know that whether it will work or not. 6 blades are used vertically, at an angle of 45deg with respect to horizontal axis. Actually the blades are fabricated by Aluminium sheets. Figure 5: Turbine blades. Jayaram. A .S. :: Direct Utilization of Wind Energy 4601
ISSN: 2347-1697 International Journal of Informative & Futuristic Research (IJIFR) Volume - 3, Issue -12, August 2016 Continuous 36 th Edition, Page No: 4598-4605 2.5 Work Holding Table: Work holding table holds the work piece which is to be finished, and it is forced to the tool using spring system. It is shown in the figure 6. Figure 6: Work holding table. 2.6 Abrasive Disc Tool: It is a round disc of 50 mm diameter abrasive tool. Help in removing material. It is shown in figure 7. Figure7: Abrasive Tool. 3. EXPERIMENTAL SETUP AND WORKING: The experimental setup is shown in figure 8. Working principle of the surface finishing machine fabricated is basically simple, as wind flows through the wind turbine it rotate the turbine, which in turn rotates the abrasive tool. And work piece is moved up by spring system and brought in contact to it and then the material is removed. Jayaram. A .S. :: Direct Utilization of Wind Energy 4602
Page 1 and 2:
Reviewed Paper Volume 3 Issue 12 Au
Page 3 and 4:
ISSN: 2347-1697 International Journ
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29: Research Paper Volume 3 Issue 12 Au
Page 30 and 31: ISSN: 2347-1697 International Journ
Page 66: ISSN: 2347-1697 International Journ
Page 90 and 91: Reviewed Paper Volume 3 Issue 12 Au
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Research Paper Volume 3 Issue 12 Au
Page 142 and 143:
Page 144 and 145:
Gender ISSN: 2347-1697 Internationa
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158:
show all

IJIFR VOLUME 3 ISSUE 12 AUGUST 2016

Create successful ePaper yourself

Delete template?

Save as template?