UPDATED

WORKING WITH DESIGN INTENT
To show how design intent works in BricsCAD, you draw a 3D shape and then use the dmPushPull
command without — and with — design intent turned on.
1. Start BricsCAD in “3D Modeling” workspace.
2. Draw a 2D shape with the PLine command, similar to the one shown below. The exact size does not matter
for this tutorial.
Closed polyline drawn with the PLine command
3. Turn the 2D shape into a 3D model by executing the Extrude command from the Quad cursor. To do so, follow
these steps:
a. Move the cursor over the polyline. Notice that it turns blue to indicate it is selected by default.
b. Move the arrow cursor into the Quad cursor icon; notice that it expands.
Exposing the Quad cursor over the polyline
198 BricsCAD V17 for AutoCAD Users