HP 8753E Network Analyzer Service Guide - Agilent Technologies

4. Set up the spectrum anulgzer display:
5.
a. Press m.
b. Press L2o)m.
c. Press (E&J
d. Press (3ooJ m.
.““” . . . . ,. . .,... . . . . ~ . . . . . ~::::::, ::::::::. :::..::..:::::
e. press ~~#~~~~~~~~:.
f. Press @ @%Q.
g. Press QiiKiFS].
.,.. ,...; .:::.: : . . . .,.w.,.,.,. . . .. . . . . . . . ;,.a . . . . . . . . . . .: . . .
h. Press .~~~~~~~.
- .._ - .._.. -...
i. Press (iZJ @KY).
Set the network anulgzer and spectrum analyzer to the harmonic frequency.
Use the appropriate test record to choose the proper harmonic frequency.
Refer to the test record in Section 2a for 3 GHz network analyzers, or the
test record in Section 2b for 6 GHz network analyzers.
� Network Anulyzer
a.
b.
c.
d.
e.
f.
g.
h.
i.
2-l 10
Press ~~:~~~~
,. . ...::./ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . *
_._- . - ._.._. --.
Enter the harmonic frequency from the test record. For example, press
(iZJ m to set the network analyzer to the second harmonic of the first
ftmdamental frequency in the 3 GHz test record.
� Spectrum Analgger
Press(jm).
Enter the harmonic frequency from the test record. For example, press
(iCJ @ to set the spectnmt analyzer to the second harmonic of the first
fundamental frequency in the 3 GHz or 6 GHz test record.
Pressfjj).
Press ~~~~~~~.
Press @EDiiF).
Press LMKR).
_ ; ,... :.:.,.:.:.:.:.:.;..‘.:::.:.:.
Press ;~~~.
System Verification and
Performance Tests