Imperial Tutorial - Autodesk

Resize elements using drag controls
Move an element
20 | Chapter 1 Introduction
16 In the Project Browser, expand Views (all), expand Floor Plans, and double-click 2nd Flr. Cnst.
When drawing or modifying a building model, it is important to understand how to adjust the
size of components in the drawing area. Small blue dots, called drag controls, display at the
ends of selected lines and walls in a plan view. Similar controls, referred to as shape handles,
display along the ends, bottoms, and tops of selected walls in elevation views and 3D views.
17 Type ZR, zoom in on the upper-left corner of the floor plan, and select the wall, as shown.
Notice the small blue dots that display at both ends of the wall. These are the drag controls.
18 Click and drag the left control, moving the cursor to the left horizontally, to lengthen the wall.
19 Click in the drawing area to deselect the wall.
20 Scroll the view down so you can see the couch and table in the floor plan.
21 Select the Craftsman02 table, and on the Tools toolbar, click (Move).