Imperial Tutorial - Autodesk

More documents

Recommendations

Info

When you create a new view and specify its view scale, the detail level is specified automatically according to the arrangement in the table. TIP You can override the detail level at any time by specifying the Detail Level parameter in the View Properties dialog or the Detail Level icon on the View Control Bar. In this table, you use the arrows between the columns to move view scales from one detail level to another. You do not select a view scale to move it. The view scale moves either from the bottom or the top of the column based on the direction. 11 Between the columns Coarse and Medium, click . Notice the 1/4" = 1’ 0" view scale moved to the Medium column. Any new view created using this scale is automatically assigned the detail level Medium. 12 Click OK. 13 Click File menu ➤ Save. 14 Click File menu ➤ Close. 15 Proceed to the next exercise, Modifying Project Browser Organization on page 950. Modifying Project Browser Organization In a typical project, you often produce multiple packages of related drawings. These drawings and sheets can become so numerous that navigating a lengthy Project Browser list can be cumbersome. To organize the views and sheets into sets of deliverables, you can use the Project Browser settings to instantly modify how the Project Browser groups and sorts. In this exercise, you modify the Project Browser organization and create new methods of grouping and sorting the views and sheets. Training File ■ Click File menu ➤ Open. ■ In the left pane of the Open dialog, click Training Files, and open Common\c_Project_Browser.rvt. Organize the Project Browser by views 1 In the Project Browser, expand Views (all), expand Floor Plans, and expand 3D Views. Notice that the views are listed alphabetically. 950 | Chapter 21 Modifying Project and System Settings
2 In the Project Browser, expand Sheets (all). Notice that the sheets are listed alphanumerically based on the sheet number. 3 Open each of the 3D views in the following order, and notice the progression of each view: ■ Main Bldg - Phase 1-Structure ■ East Wing - Phase 2-Structure ■ West Wing - Phase 3-Structure ■ Completed Project-Structure ■ Completed Structure w/ Roof&Floors ■ Completed Project Each of the 3D views varies by phase and discipline. 4 Click Settings menu ➤ Browser Organization. 5 On the Views tab, select Discipline, and click OK. In the Project Browser, notice that Views are divided into Architectural and Structural disciplines. 6 In the Project Browser, expand both the Architectural and Structural views. 7 Click Settings menu ➤ Browser Organization. 8 Select Phase, and click Apply. In the Project Browser, notice that views are grouped by phase. 9 In the Browser Organization dialog, select Type/Discipline, and click OK. 10 In the Project Browser, expand each view type, and notice that each is grouped by discipline. Organize Project Browser by sheets 11 Click Settings menu ➤ Browser Organization. 12 Click the Sheets tab. 13 Select Sheet Prefix, and click OK. 14 In the Project Browser, under Sheets, expand each sheet set. Modifying Project Browser Organization | 951
Page 1 and 2:
Revit MEP 2009 Imperial Tutorial Ap
Page 3:
Portions relating to JPEG © Copyri
Page 6 and 7:
Placing Spaces . . . . . . . . . .
Page 8 and 9:
Adding Views to Sheets . . . . . .
Page 10 and 11:
Managing Linked Building Models . .
Page 13 and 14:
Introduction This introduction help
Page 15 and 16:
■ For File name, enter the new fi
Page 17 and 18:
There are 2 types of model elements
Page 19 and 20:
■ System families include walls,
Page 21 and 22:
The Options Bar The Type Selector t
Page 23 and 24:
The Design Bar is located on the le
Page 25 and 26:
The Status Bar ■ The browser is o
Page 27 and 28:
In addition, context-sensitive help
Page 29 and 30:
9 If you use a mouse that has a whe
Page 31 and 32:
Some commands, such as Move and Cop
Page 33:
Express Workshop 23
Page 36 and 37:
Creating a Secondary Supply Air Sys
Page 38 and 39:
28 | Chapter 2 Express Workshop Dir
Page 40 and 41:
20 While pressing CTRL, move the cu
Page 42 and 43:
A network layout solution displays
Page 44 and 45:
■ Verify that Only is selected.
Page 46 and 47:
Add an end cap 6 Press ESC twice to
Page 48 and 49:
Ductwork is automatically created t
Page 50 and 51:
The cursor displays as the air hand
Page 52 and 53:
A vertical section of duct is creat
Page 54 and 55:
In the Element Properties dialog, u
Page 56 and 57:
The selected system maintains its a
Page 58 and 59:
Dataset ■ Click File menu ➤ Ope
Page 60 and 61:
50 | Chapter 2 Express Workshop The
Page 62 and 63:
15 Press ESC to clear the sketch gr
Page 64 and 65:
Modify a circuit The sketch graphic
Page 66 and 67:
The modified circuit is highlighted
Page 68 and 69:
The Options Bar displays the select
Page 70 and 71:
Verify the switch system 26 Move th
Page 72 and 73:
The top part of the tag for the lig
Page 74 and 75:
2 On the Options Bar, click (Create
Page 76 and 77:
9 Select the wire shown. The tick m
Page 78 and 79:
68 | Chapter 2 Express Workshop 20
Page 80 and 81:
70 | Chapter 2 Express Workshop 26
Page 82 and 83:
The temporary label shows the circu
Page 84 and 85:
The reorganized circuit structure i
Page 87 and 88:
Mechanical Systems In this tutorial
Page 89 and 90:
7 On the Basic tab of the Design Ba
Page 91 and 92:
20 Click to place the space. Only t
Page 93 and 94:
Enter Office, and press ENTER. 26 D
Page 95 and 96:
■ Verify that Radius is cleared.
Page 97 and 98:
47 Click OK. The space is renamed E
Page 99 and 100:
NOTE You can also press F9 (with th
Page 101 and 102:
15 On the Zone toolbar, click Finis
Page 103 and 104:
The new zone name displays in the Z
Page 105 and 106:
8 For additional practice, use the
Page 107 and 108:
View a space 8 In the preview pane,
Page 109 and 110:
20 Under the list of spaces and zon
Page 111 and 112:
Mechanical Systems:Air Designing Ai
Page 113 and 114:
12 On the Mechanical tab of the Des
Page 115 and 116:
Before you copy the exhaust diffuse
Page 117 and 118:
Optional: Complete the level 1 supp
Page 119 and 120:
■ Open the i Air System Schedules
Page 121 and 122:
This closes all open windows that a
Page 123 and 124:
5 Click OK twice. 6 Type VG on the
Page 125 and 126:
Create the ductwork Notice that onl
Page 127 and 128:
The physical connection composed of
Page 129 and 130:
IMPORTANT The Duct Sizing dialog di
Page 131 and 132:
48 Notice that the cursor changes t
Page 133 and 134:
Modify the layout path and create t
Page 135 and 136:
Size the duct Notice that the cente
Page 137 and 138:
Next, you create a low pressure sec
Page 139 and 140:
The new system named Mechanical Sup
Page 141 and 142:
The ductwork is created. Remember t
Page 143 and 144:
Size the duct The system components
Page 145 and 146:
The completed level 1 secondary sup
Page 147 and 148:
Create and use a section view to va
Page 149 and 150:
14 Continue to validate the duct ge
Page 151 and 152:
27 In the Save As dialog, enter Usi
Page 153 and 154:
NOTE You must place the cursor over
Page 155 and 156:
TIP When zooming or reorienting a v
Page 157 and 158:
The completed level 1 air system la
Page 159 and 160:
Place an endcap on the level 1 prim
Page 161 and 162:
The sized left primary is shown bel
Page 163 and 164:
The completed level 2 primary duct
Page 165 and 166:
TIP Color names are displayed under
Page 167 and 168:
Split the main 3 Right-click Supply
Page 169 and 170:
Tag the main The low pressure secon
Page 171 and 172:
6 On the System Inspector tab of th
Page 173 and 174:
Dataset ■ Click File menu ➤ Ope
Page 175 and 176:
A new section view named Section 2
Page 177 and 178:
This specifies the AC unit offset l
Page 179 and 180:
Tile the views Next, you tile the R
Page 181 and 182:
Notice that the mitered elbow fitti
Page 183 and 184:
26 Move the cursor over the primary
Page 185 and 186:
33 Select the right primary duct, r
Page 187 and 188:
Notice that the endcap snap follows
Page 189 and 190:
50 Press Tab to check connectivity.
Page 191 and 192:
Validate the primary supply air sys
Page 193 and 194:
Notice that the duct riser passes t
Page 195 and 196:
The completed level 1 primary suppl
Page 197 and 198:
The red lines represent the default
Page 199 and 200:
Mechanical Systems: Piping Designin
Page 201 and 202:
You use this view to create the pip
Page 203 and 204:
33 In the Visibility Graphics dialo
Page 205 and 206:
for the boiler pipe connection), du
Page 207 and 208:
7 Place the cursor over the top ext
Page 209 and 210:
16 Enter ZR, and sketch a zoom regi
Page 211 and 212:
IMPORTANT In the System Browser, al
Page 213 and 214:
Create the return hydronic piping s
Page 215 and 216:
Notice that all components that are
Page 217 and 218:
The inset is the distance from the
Page 219 and 220:
18 Repeat the process to modify the
Page 221 and 222:
Notice that the pipes and symbolic
Page 223 and 224:
Remember that although the physical
Page 225 and 226:
After the pipe run and radiators ar
Page 227 and 228:
In this exercise, you used the Layo
Page 229 and 230:
A new section view named Section 3
Page 231 and 232:
The section view confirms that the
Page 233 and 234:
Zoom the split and notice that a li
Page 235 and 236:
34 Draw the pipe 12’ 0" to the le
Page 237 and 238:
This activates the Draw tool, and a
Page 239 and 240:
You can either drag the pipe segmen
Page 241 and 242:
Tile the views 2 With the 3D Piping
Page 243 and 244:
A green pipe riser symbol displays
Page 245 and 246:
The boiler is connected to the left
Page 247 and 248:
28 In the 3D Piping view, select th
Page 249 and 250:
The right supply pipe run is connec
Page 251 and 252:
48 Draw the pipe up toward the retu
Page 253 and 254:
54 Draw the pipe toward the return
Page 255 and 256:
58 Validate the return pipe geometr
Page 257 and 258:
The left return pipe is aligned wit
Page 259 and 260:
The boiler is physically connected
Page 261 and 262:
Notice that the branch sizing used
Page 263 and 264:
Notice that a pipe fitting is autom
Page 265 and 266:
24 Click OK. The circulator pump is
Page 267 and 268:
31 With the 2 - Piping and the 3D P
Page 269 and 270:
in the Unassigned folder in the Sys
Page 271 and 272:
NOTE You can also use System Inspec
Page 273 and 274:
15 On the System Inspector tab of t
Page 275 and 276:
The red lines represent the default
Page 277 and 278:
connections and creating logical sy
Page 279 and 280:
Electrical Systems In this tutorial
Page 281 and 282:
Parameter Neutral Multiplier Neutra
Page 283 and 284:
NOTE Although it is possible to spe
Page 285 and 286:
Open the provided dataset, as descr
Page 287 and 288:
Enter a space type in the Key Name
Page 289 and 290:
Level 1 - Lighting 2 - Lighting 2 -
Page 291 and 292:
16 Make the 2 - Lighting floor plan
Page 293 and 294:
8 On the Formatting tab, under fiel
Page 295 and 296:
4 On the Windows menu, click Close
Page 297 and 298:
In the Space Lighting Analysis sche
Page 299 and 300:
21 Again, check the Average Estimat
Page 301 and 302:
With the exception of the 2 Mechani
Page 303 and 304:
15 Zoom in on the stairwell at the
Page 305 and 306:
23 Zoom in on the stairwell at the
Page 307 and 308:
3 In the Element Properties dialog,
Page 309 and 310:
2-Power Place floor-hosted receptac
Page 311 and 312:
28 Draw a pick box around the 2 flo
Page 313 and 314:
In this exercise you placed wall-ho
Page 315 and 316:
Page 317 and 318:
Add panels and a transformer to sec
Page 319 and 320:
40 Select the T1 transformer, and c
Page 321 and 322:
A question mark is displayed for th
Page 323 and 324:
15 Click Cancel to close the Elemen
Page 325 and 326:
Page 327 and 328:
17 On the Options Bar, click , clic
Page 329 and 330:
29 For more practice, continue perf
Page 331 and 332:
2 Select all the lighting fixtures
Page 333 and 334:
18 On the Switch System toolbar, cl
Page 335 and 336:
NOTE Do not overwrite the original
Page 337 and 338:
11 Click in the open area near the
Page 339 and 340:
number of hot conductors. In the pr
Page 341 and 342:
Completed 2-Power 20 You can save t
Page 343 and 344:
The device you selected in the Syst
Page 345 and 346:
Add a Hot Conductor to the wiring f
Page 347 and 348:
Check Circuits 29 Using the same me
Page 349 and 350:
2 In the Mechanical/Electrical spac
Page 351 and 352:
Verify/adjust wire sizes Now that y
Page 353 and 354:
Plumbing Systems 7 The most common
Page 355 and 356:
6 In the Project Browser, expand Fa
Page 357 and 358:
The men’s room is partitioned for
Page 359 and 360:
10 Click the center line of the toi
Page 361 and 362:
29 Move the cursor over the counter
Page 363 and 364:
The fine setting displays 2-line pi
Page 365 and 366:
Up to 6 piping layout solutions are
Page 367 and 368:
32 Examine the piping that was auto
Page 369 and 370:
38 You can save the open file if yo
Page 371 and 372:
If you select the pipe, you can ver
Page 373 and 374:
20 On the Options Bar, enter 0' 6"
Page 375 and 376:
33 In the Visibility/Graphic Overri
Page 377 and 378:
Using Routing Solutions to finish t
Page 379 and 380:
66 Using the same method, specify t
Page 381 and 382:
76 If you want to save your work, c
Page 383 and 384:
8 Click Modify. The wye is added to
Page 385 and 386:
NOTE There is a known issue when co
Page 387 and 388:
3 Press Delete. 4 Select the pipe c
Page 389 and 390:
Resize pipes 20 In the Project Brow
Page 391 and 392:
This will provide the space require
Page 393 and 394:
4 On the Plumbing tab on the Design
Page 395 and 396:
13 Double-click the section symbol
Page 397 and 398:
26 Double-click 3D - Plumbing to ma
Page 399 and 400:
34 Zoom out to view the vents from
Page 401 and 402:
5 In the Type Properties dialog, in
Page 403 and 404:
36 Move the cursor over the cold wa
Page 405 and 406:
53 Click Modify. 54 Select the left
Page 407 and 408:
59 On the Options Bar, specify 2" f
Page 409 and 410:
2 Press F9 to open the System Brows
Page 411 and 412:
27 Click Modify. 28 On the Plumbing
Page 413 and 414:
42 While maintaining a 90 degree an
Page 415 and 416:
Fire Protection Systems In this tut
Page 417 and 418:
■ For Offset, verify that 9' 0" i
Page 419 and 420:
31 In the Format dialog, do the fol
Page 421 and 422:
6 With the view zoomed, place the c
Page 423 and 424:
A copy of the sprinkler is immediat
Page 425 and 426:
19 Move the cursor directly down, a
Page 427 and 428:
20 On the Design Bar, click Modify.
Page 429 and 430:
The Office 202 sprinklers are place
Page 431 and 432:
31 Move the cursor directly down al
Page 433 and 434:
You have now placed the sprinklers
Page 435 and 436:
44 Move the cursor along the same h
Page 437 and 438:
The arrays are created, and an erro
Page 439 and 440:
The sprinkler is added to the space
Page 441 and 442:
70 In the Project Browser, double-c
Page 443 and 444:
Explore the System Browser 3 On the
Page 445 and 446:
NOTE The (Layout Path) button is av
Page 447 and 448:
27 Drag the parallel movement contr
Page 449 and 450:
33 Zoom in on the 3 offices at the
Page 451 and 452:
Continue combining piping 40 Zoom i
Page 453 and 454:
54 Zoom in on the office in the low
Page 455 and 456:
An elbow is inserted to complete th
Page 457 and 458:
6 On the Edit System toolbar, click
Page 459 and 460:
The layout automatically provides a
Page 461 and 462:
Check pipe connectivity 21 Highligh
Page 463 and 464:
4 On the Edit toolbar, click (Copy)
Page 465 and 466:
20 Click the horizontal pipe direct
Page 467 and 468:
30 Select the unconnected sprinkler
Page 469 and 470:
You will work mainly in the floor p
Page 471 and 472:
Modify the diameter of the main 13
Page 473 and 474:
The main piping is selected and dis
Page 475 and 476:
This segment services 4 sprinklers.
Page 477 and 478:
39 Click the tag to display end con
Page 479 and 480:
Creating Revit MEP Content This tut
Page 481 and 482:
Create Shared Parameters 8 On the D
Page 483 and 484:
Add an electrical connector 36 Elec
Page 485 and 486:
Dataset: ■ Click File menu ➤ Op
Page 487 and 488:
■ For Apparent Power Phase 1, ent
Page 489 and 490:
Flex the family ■ For Apparent Lo
Page 491 and 492:
68 Click (Layout Paths), and click
Page 493 and 494:
NOTE Because Flow Factor and Flow C
Page 495 and 496:
31 On the Options Bar, click Load.
Page 497 and 498:
51 In the drawing area, select the
Page 499 and 500:
6 Zoom in, and move the cursor over
Page 501 and 502:
■ For Flow Configuration, select
Page 503 and 504:
8 On the Design Bar, click Load int
Page 505 and 506:
The label is copied. 9 Repeat the p
Page 507 and 508:
17 Using the same method, modify th
Page 509 and 510:
planes that define the location of
Page 511 and 512:
Next you will duplicate the origina
Page 513 and 514:
23 Click Modify. 24 On the toolbar,
Page 515 and 516:
Under Electrical Loads ■ For Appa
Page 517 and 518:
Flange Family 46 Click Finish Sketc
Page 519 and 520:
12 Click OK. 13 Using the same meth
Page 521 and 522:
32 Select the dimension between the
Page 523 and 524:
59 Click Modify. 60 Select the dime
Page 525 and 526:
Add connectors 92 Click Extrusion P
Page 527 and 528:
111 Spin the flange to view the bac
Page 529 and 530:
NOTE Fittings are among the most co
Page 531 and 532:
24 Click Modify. 25 Right-click the
Page 533 and 534:
39 On the Design Bar, click Referen
Page 535 and 536:
While drawing the diagonal referenc
Page 537 and 538:
Next, you specify values and formul
Page 539 and 540:
84 On the Family tab of the Design
Page 541 and 542:
108 Click File ➤ Save, and save t
Page 543 and 544:
The geometry for the left coupling
Page 545 and 546:
140 While pressing SHIFT and the mi
Page 547 and 548:
A model line is created over the re
Page 549 and 550:
Flex the part 170 On the View Contr
Page 551 and 552:
Only model lines and reference plan
Page 553 and 554:
You place 2 dimensions for the righ
Page 555 and 556:
203 Continue to flex the fitting by
Page 557 and 558:
The primary connector is placed. Yo
Page 559 and 560:
IMPORTANT Connector rotation is a c
Page 561 and 562:
Verify connector arrow direction 23
Page 563 and 564:
257 Enter ZR, and draw a zoom regio
Page 565 and 566:
The threaded elbow is ready to be u
Page 567 and 568:
19 Move the cursor directly up and
Page 569 and 570:
A chain of 2 lines is drawn. 23 On
Page 571 and 572:
45 Drag the middle shape handle up
Page 573 and 574:
Apparent Load Phase 1 Apparent Load
Page 575 and 576:
Angle Graphics Size on screen Mecha
Page 577 and 578:
Load Classifications Revit MEP main
Page 579 and 580:
esult LookupTableName LookupColumn
Page 581 and 582:
Family Category Sprinklers Light So
Page 583 and 584:
■ Switchboard: Used to connect de
Page 585 and 586:
Documenting Your Projects In this s
Page 587 and 588:
Adding Views and Sheets to a Projec
Page 589 and 590:
Duplicate the Level 1 floor plan to
Page 591 and 592:
14 On the View Control Bar, click t
Page 593 and 594:
South East elevation view Section v
Page 595 and 596:
Rename and view the new elevation 9
Page 597 and 598:
19 Click the blue arrows below the
Page 599 and 600:
Creating Callout Views 25 On the De
Page 601 and 602:
■ Move the cursor to the lower-le
Page 603 and 604:
Create a detail view callout 11 In
Page 605 and 606:
20 Click File menu ➤ Save. Modify
Page 607 and 608:
Modify the line weight of the secti
Page 609 and 610:
45 For Line Pattern, select Dash. 4
Page 611 and 612:
10 Under Visibility, clear: ■ Cal
Page 613 and 614:
2 In the Project Browser, select Pe
Page 615 and 616:
11 On the Options Bar, click (Recta
Page 617 and 618:
18 In the Visibility/Graphics Overr
Page 619 and 620:
7 On the View menu, click Zoom ➤
Page 621 and 622:
2 Select the Copy of Unit 18 Plan -
Page 623 and 624:
19 Select 1 of the chairs around th
Page 625 and 626:
32 Select one of the lamps, right-c
Page 627 and 628:
NOTE The vertical time and date sta
Page 629 and 630:
Create a floor plan sheet 15 In the
Page 631 and 632:
7 Drag the North elevation to the l
Page 633 and 634:
View updated annotation on referenc
Page 635 and 636:
6 Right-click, and click Deactivate
Page 637 and 638:
8 On the Options Bar, click . 9 In
Page 639 and 640:
17 Reposition the view on the title
Page 641 and 642:
Tagging and Scheduling In this tuto
Page 643 and 644:
6 Using the same method, create a h
Page 645 and 646:
18 Click the room text label, type
Page 647 and 648:
30 Click File menu ➤ Save As. Tag
Page 649 and 650:
9 Using one of the methods you just
Page 651 and 652:
25 Zoom to the lower-right area of
Page 653 and 654:
16 Drag the table tag to the center
Page 655 and 656:
You begin by creating a window inst
Page 657 and 658:
A schedule is created that contains
Page 659 and 660:
24 Change the Type Mark for the oth
Page 661 and 662:
Group headers in the schedule 13 In
Page 663 and 664:
13 In the Project Browser, click Un
Page 665 and 666:
Add new rooms to the schedule 9 On
Page 667 and 668:
8 Draw a vertical separation line f
Page 669 and 670:
15 Click to place the room in the a
Page 671 and 672:
32 Using the same method, add 2 mor
Page 673 and 674:
11 In the Edit Color Scheme dialog,
Page 675 and 676:
Create a section color diagram 31 I
Page 677 and 678:
Assign the penthouse room the servi
Page 679 and 680:
Assign the correct heights to the r
Page 681 and 682:
2 Zoom in to the roof area of the b
Page 683 and 684:
Material: Description Wood Joist Ma
Page 685 and 686:
Adding Shared Parameters to a Famil
Page 687 and 688:
Page 689 and 690:
7 Move the cursor down, through the
Page 691 and 692:
Page 693 and 694:
Create a wall schedule 1 On the Vie
Page 695 and 696:
Revit MEP creates 2 tables for the
Page 697 and 698:
Annotating and Dimensioning In this
Page 699 and 700:
Training File ■ Click File menu
Page 701 and 702:
The reported value of the Loft leve
Page 703 and 704:
Linear and multi-segmented dimensio
Page 705 and 706:
6 Click the lock that displays on t
Page 707 and 708:
Make the dimension segments equal t
Page 709 and 710:
Page 711 and 712:
Place an angular dimension 47 Zoom
Page 713 and 714:
Select automatic dimensioning optio
Page 715 and 716:
3 On the Basics tab of the Design B
Page 717 and 718:
11 Move the cursor down, and specif
Page 719 and 720:
20 Click the blue middle grip, drag
Page 721 and 722:
■ Under Text, for Text Size, type
Page 723 and 724:
Adding Text Notes to the Floor Plan
Page 725 and 726:
Create a text box with leaders 13 O
Page 727 and 728:
Add another note using the Standard
Page 729 and 730:
Detailing In this tutorial, you lea
Page 731 and 732:
8 Delete the component. Place a rep
Page 733 and 734:
Because you still have several comp
Page 735 and 736:
Add insulation 39 On the Design Bar
Page 737 and 738:
Adding Detail Lines 52 Proceed to t
Page 739 and 740:
17 Draw a horizontal line as shown.
Page 741 and 742:
Adding Text Notes 32 Click Modify.
Page 743 and 744:
The selected lines need to be repla
Page 745 and 746:
Adding Keynotes In this exercise, y
Page 747 and 748:
Creating Line-based Detail Componen
Page 749 and 750:
Add a vapor barrier component 51 On
Page 751 and 752:
69 Select the component, and click
Page 753 and 754:
■ Click Open. 5 Enter zf to zoom
Page 755 and 756:
18 Save the file. 19 Proceed to the
Page 757 and 758:
Mirror the region 21 Select the fil
Page 759 and 760:
37 On the Design Bar, click Finish
Page 761 and 762:
54 On the Tools toolbar, click (Tri
Page 763 and 764:
Add detail lines 70 On the Design B
Page 765 and 766:
89 On the Design Bar, click Detail
Page 767 and 768:
Add dimensions 104 On the Design Ba
Page 769 and 770:
125 Select Modify to end the comman
Page 771 and 772:
Finishing the Sheets In this tutori
Page 773 and 774:
9 Drag the midpoint of the leader t
Page 775 and 776:
Page 777 and 778:
Using Drawing Lists 31 On the Desig
Page 779 and 780:
Using Legends 9 On the Design Bar,
Page 781 and 782:
Add text to the legend 11 In the Ty
Page 783 and 784:
Creating a Component Legend In this
Page 785 and 786:
Add text to the legend 15 On the Op
Page 787 and 788:
25 On the Design Bar, click Modify
Page 789 and 790:
35 Optionally, click if you do not
Page 791 and 792:
8 Click OK. 9 Save the file. Sketch
Page 793 and 794:
Modify revision cloud style 12 Sele
Page 795 and 796:
Continue to use the training file y
Page 797 and 798:
Change the sequencing of revision t
Page 799 and 800:
The revision schedule is now shown
Page 801 and 802:
Importing Image Files In this exerc
Page 803 and 804:
Continue to use the training file y
Page 805 and 806:
Using Dependent Views In this tutor
Page 807 and 808:
Using Dependent Views in Documentat
Page 809 and 810:
8 Click the inside control on the b
Page 811 and 812:
The outside controls adjust the ann
Page 813 and 814:
25 Click Settings menu ➤ Object S
Page 815 and 816:
The Sheet number of the dependent v
Page 817 and 818:
50 Use the same method to hide Cubi
Page 819 and 820:
The dependent view opens. 3 In the
Page 821 and 822:
Page 823 and 824:
Using Advanced Features 813
Page 825 and 826:
Grouping Using the grouping functio
Page 827 and 828:
3 Draw a selection box (lower-right
Page 829 and 830:
Place instances of the group 9 In t
Page 831 and 832:
17 Select the kitchen in the stairw
Page 833 and 834:
Save the training file Modifying a
Page 835 and 836:
Page 837 and 838:
Nesting Groups 24 On the Design Bar
Page 839 and 840:
6 Press TAB, select the wall betwee
Page 841 and 842:
3 On the Drafting tab of the Design
Page 843 and 844:
Page 845 and 846:
7 On the Options Bar, click (Filter
Page 847 and 848:
Continue using the training file sa
Page 849 and 850:
Sharing Projects When working with
Page 851 and 852:
You should take into consideration
Page 853 and 854:
Tips and common scenarios 1 When wo
Page 855 and 856:
When you enable worksharing, Revit
Page 857 and 858:
The Level 1 floor plan should displ
Page 859 and 860:
16 On the Basics tab of the Design
Page 861 and 862:
35 Using the following illustration
Page 863 and 864:
You are now the owner of that works
Page 865 and 866:
47 On the Modelling tab of the Desi
Page 867 and 868:
4 In the File Save Options dialog,
Page 869 and 870:
34 In the Editing Requests dialog,
Page 871 and 872:
Creating Multiple Design Options Wh
Page 873 and 874:
3 Select Option 1 (primary), click
Page 875 and 876:
Notice the 12 columns that you adde
Page 877 and 878:
Notice that the beams complete the
Page 879 and 880:
Page 881 and 882:
Three more roof beams are placed at
Page 883 and 884:
Page 885 and 886:
Add the louvers to the design optio
Page 887 and 888:
Create sunscreen roof system 32 In
Page 889 and 890:
Managing Design Options In this exe
Page 891 and 892:
At this point, all isometric views
Page 893 and 894:
Project Phasing In any project, you
Page 895 and 896:
Change the phase of the existing bu
Page 897 and 898:
31 Under Phase Status, select Demol
Page 899 and 900:
The composite plan phase filter use
Page 901 and 902:
4 Click Settings menu ➤ Phases. I
Page 903 and 904:
Linking Building Models and Sharing
Page 905 and 906:
■ Auto - Origin to Origin: The or
Page 907 and 908:
Move the condo complex building mod
Page 909 and 910: 23 On the Edit toolbar, click (Rota
Page 911 and 912: Copy the townhouse The townhouse is
Page 913 and 914: 38 On the File menu, click Save. NO
Page 915 and 916: Notice that the townhouse is now at
Page 917 and 918: Apply halftone 12 Using the same te
Page 919 and 920: NOTE This exercise requires the com
Page 921 and 922: 10 In the Save As dialog, navigate
Page 923 and 924: 4 In the Manage Place and Locations
Page 925 and 926: 23 Click Save Locations. 24 In the
Page 927 and 928: ■ Navigate to the Model Linking f
Page 929 and 930: Report shared coordinates 8 On the
Page 931 and 932: 8 Click OK. Sort schedule data In o
Page 933 and 934: Customizing Project Settings and Te
Page 935 and 936: Modifying Project and System Settin
Page 937 and 938: 27 Click the General tab, and make
Page 939 and 940: The new library displays in the lef
Page 941 and 942: 6 Under Dimension Snaps, click in t
Page 943 and 944: Modifying Project Settings In this
Page 945 and 946: 14 In the Element Properties dialog
Page 947 and 948: TIP If you want to see the material
Page 949 and 950: In the Materials dialog, notice tha
Page 951 and 952: Notice the exterior frames of all t
Page 953 and 954: 6 Click OK twice. Now that you have
Page 955 and 956: 16 Click Settings menu ➤ Object S
Page 957 and 958: Modifying Annotations In this exerc
Page 959: The remaining untagged windows are
Page 963 and 964: Creating an Office Template In this
Page 965 and 966: 3 Click the Render Appearance tab.
Page 967 and 968: 47 Repeat the previous 5 steps for
Page 969 and 970: Loading and Modifying Families and
Page 971 and 972: 11 On the Options Bar, click (Eleme
Page 973 and 974: Create 3D views 20 In the Project B
Page 975 and 976: 2 For each category, specify the fo
Page 977 and 978: 29 Add shared project parameters as
show all

Imperial Tutorial - Autodesk

Create successful ePaper yourself

Delete template?

Save as template?