The_models__dimensions_2017_

Ventilation appliances
211
Planning example 2
1 x VL 414 with AR 413 122
Flat duct with 2 x 90° duct bends or flat duct with 1 x 90° duct bend
Combination
1 x downdraft ventilation in combination with 1 x AR 413 122 remote fan unit.
Good to know
– The remote fan unit can be turned in all directions, depending on the desired
direction for the exhaust air or filter removal.
– For optimum performance, the recirculated air requires sufficient space to escape
(outflow surface area of at least 700 cm²). For this, we recommend the air exhaust
grille AA 010 410.
– The connecting piece DN 150 is included with the remote fan unit.
– The recommended minimum distance between filter openings and cupboard wall
if there is no ventilation grille directly in front: 15 cm.
List of accessories 1
– 1 x AD 854 046 (connecting piece for VL 414, DN 150)
– 1 x AD 852 031 (flat duct with horizontal 90° duct bend)
– 1 x AD 852 030 (flat duct with vertical 90° duct bend)
– 1 x AD 852 010 (flat duct)
– 1 x AD 852 041 (flat duct adapter round)
– 1 x AD 990 090 (adhesive tape for sealing the ducts)
Order as set (appliances and accessories): SET1VL4101.
List of accessories 2
– 1 x AD 854 046 (connecting piece for VL 414, DN 150)
– 1 x AD 852 030 (flat duct with vertical 90° duct bend)
– 1 x AD 852 010 (flat duct)
– 1 x AD 852 041 (flat duct adapter round)
– 1 x AD 990 090 (adhesive tape for sealing the ducts)
Order as set (appliances and accessories): SET1VL4102.