The_models__dimensions_2017_

Recommended configurations of the downdraft ventilation 200 series and remote fan units 200 series
Planning example 3
2 x VL 040 / 41 with AR 413 121
Aluflex pipe with downward exit or 2 x 90° flat duct bends
Good to know
– The remote fan unit can be turned in all directions, depending on the desired
direction for the exhaust air or filter removal.
– For optimum performance, the recirculated air requires sufficient space to escape
(outflow surface area of at least 700 cm²).
– The recommended minimum distance between filter openings and cupboard wall
if there is no ventilation grille directly in front: 15 cm.
List of accessories 1
– 2 x AD 724 042 (round duct connecting pieces for VL)
– 2 x AD 751 010 (aluflex pipe round DN 150)
– 1 x AD 704 048 (air collector box round duct)
– 1 x AD 990 090 (adhesive tape for bonding the ducts)
Order as set (appliances and accessories):
Stainless Steel: SET2VL2110
List of accessories 2
– 2 x AD 854 046 (connecting pieces for VL, DN 150)
– 4 x AD 852 031 (flat duct 90° bend horizontal)
– 4 x AD 852 030 (flat duct 90° bend vertical)
– 2 x AD 852 010 (flat duct pipe)
– 1 x AD 854 048 (air collection box flat duct)
– 1 x AD 990 090 (adhesive tape for bonding the ducts)
Order as set (appliances and accessories):
Stainless Steel: SET2VL2111