Air-Cooled Series R™ Rotary Liquid Chiller - Trane

You…
Like its chillers, Trane wants its
relationships with customers to last.
Trane is interested in maintaining long
term, loyal relationships. This
perspective means the point in time that
a customer purchases a chiller is the
beginning of a relationship, not the end.
Your business is important, but your
satisfaction is paramount.
Designed by Customers….
Trane’s RTAC was designed with the end
user’s requirements in mind. Reliability,
sound, efficiency and physical size were
primary design concerns with this latest
generation machine. New technologies
were applied to literally every major
component. The result is an unparalleled
engineering achievement in chiller
design and manufacturing.
What’s New
The RTAC offers the same high reliability
of Trane’s previous air-cooled helical
rotary design coupled with lowered
sound levels, increased energy
efficiency, reduced physical footprint due
to its advanced design, low speed/direct
drive compressor and proven Series R
performance.
Some of the major advantages of the
Model RTAC are:
Over 99% reliable
Lower sound levels
Higher energy efficiency
Smaller physical footprint
HFC-134a optimized design
The Series R Model RTAC is an industrial
grade design built for both the industrial
and commercial markets. It is ideal for
schools, hospitals, retailers, office
buildings, Internet service providers and
manufacturing facilities.
Introduction
Figure 1. Cutaway of RTAC air-cooled chiller
1. Flooded Style Evaporator
2. Trane Helical-Rotary Compressor
3. Oil Separator
4. Low Sound Condenser Fans
5. Factory Installed and Tested Unit
Controls and Starter
6. Smaller Physical Footprint
2
© 2003 American Standard Inc. All rights reserved. RLC-PRC006-EN
1
3
4
6
5
5
5