You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Step 8:<br />
Double click on the .HEX File you want<br />
and it will load into the .HEX File box on<br />
the program screen as indicated in<br />
(Fig 15)<br />
(Fig 15)<br />
Step 9:<br />
Press the program button, as indicated<br />
in (Fig 16) the software will load the<br />
.HEX file and upgrade the PCB<br />
software<br />
(Fig 16)<br />
Step 10:<br />
The progress bar will track the program<br />
as it loads as indicated in (Fig 17); this<br />
will only take a couple of seconds to<br />
complete<br />
(Fig 17)<br />
When the software if fully loaded; the<br />
PCB will confirm with a pop up box<br />
(Fig 18)<br />
Step 11:<br />
Click “OK” to confirm that the board has<br />
been reprogrammed as indicated in<br />
(Fig 18)<br />
If you do not get the screen indicated in Fig 13 return to Step 5 and repeat the process.<br />
Copyright © 2017 DDC Dolphin Ltd. Page 26 of 40 April 17 SGPC – <strong>V25.1</strong>