Manufacturing Machinery World February 2018
Machinery World was launched in 1982 to serve the machinery & production engineering market. Editorially Machinery World is a news and information source that gives direct contact with the provider of innovative services and equipment. Editorial is available both online and in hard copy. Machinery World carries news, views, projects, invites opinions and is a source of information readily available online and by smartphone.
Machinery World was launched in 1982 to serve the machinery & production engineering market.
Editorially Machinery World is a news and information source that gives direct contact with the provider of innovative services and equipment. Editorial is available both online and in hard copy.
Machinery World carries news, views, projects, invites opinions and is a source of information readily available online and by smartphone.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ABWOOD RG1<br />
Rotary Table<br />
Surface Grinder<br />
Table Dia. 730<br />
mm, Complete<br />
with coolant<br />
system. £POA<br />
HAAS TM-1<br />
Toolroom CNC<br />
Mill (2006)<br />
Traverses X Y Z:<br />
762 x 305 x<br />
406mm, Table<br />
1213 x 267mm,<br />
Spindle speed<br />
4000 rpm,<br />
Spindle taper<br />
BT40, Spindle<br />
Motor 5.6kW,<br />
HAAS Control,<br />
low volt light,<br />
coolant. £POA<br />
KEARNS<br />
RICHARD S<br />
TYPE<br />
Horizontal<br />
Boring & Facing<br />
Machine Table<br />
size 560 x 400<br />
mm, Spindle<br />
40int Taper with<br />
DRO £POA<br />
DEAN SMITH & GRACE 1709 Straight Bed centre lathe, swing over<br />
bed 17”, 9” over Cross Slide and 40” between Centre.<br />
Spindle speeds up to 1250rpm. C/w 3-4 jaw chucks, fixed steady,<br />
Taper Turning. £POA<br />
HARRISON M400 Gap bed Centre Lathe, Swing over bed<br />
420 mm x 1500 mm between Centres, Spindle Bore 65 mm<br />
C/ w 3 & 4 Jaw Chucks and Newall DRO £7950.00<br />
HURCO VM10 Machining Centre<br />
New 2013, Table Size … 762 x 356 mm<br />
Traverse … X- 660 mm, Y- 406 mm, Z – 508 mm, 20 Tool Changer, 6200 hr usage,<br />
with WINMAX 8.01.09.25, Cat/Din Tool arm, Ultipocket Software, NC Merge<br />
Software £POA<br />
VISIT OUR WEBSITE AT: www.philgeesinmachinery.co.uk<br />
<strong>Machinery</strong> <strong>World</strong>, <strong>February</strong> 2010 33<br />
TO VIEW PHOTOGRAPHS & FULL STOCK LIST<br />
WANTED MODERN USED MACHINE TOOLS AND FABRICATION EQUIPMENT – PLEASE OFFER US YOUR REDUNDANT MACHINERY.<br />
METROL<br />
High accuracy<br />
sensors.<br />
Used on CNC<br />
Lathes, Machining<br />
Centres and<br />
Grinders.<br />
Supplied by CNC Systems Ltd UK<br />
and European distributer.<br />
Tel : 01932 830492<br />
Email: offices@cncsystemsltd.co.uk<br />
Web: www.cncsystemsltd.co.uk<br />
<strong>Machinery</strong> <strong>World</strong>, <strong>February</strong> <strong>2018</strong> 33
Change language