EN | Square Bale Wrappers | G30 Q Series & G40 Q Series | Goeweil
Premium grass silage requires superior feed preservation. The square bale wrappers of the G30 Q and G40 Q series satisfy these requirements to the fullest. Square bales are packaged into convenient feed units in a fast, cleanand, first and foremost, perfectly air-tight manner
Premium grass silage requires superior feed preservation. The square
bale wrappers of the G30 Q and G40 Q series satisfy these requirements
to the fullest. Square bales are packaged into convenient feed units in a
fast, cleanand, first and foremost, perfectly air-tight manner
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ADDITIONAL EQUIPM<strong>EN</strong>T<br />
Fully automatic program control PROFI<br />
All work cycles are fully automatic<br />
Radio remote control<br />
Only in conjunction with program control PROFI fully automatic program control.<br />
required connection: 3-pin socket for the electrical supply of the terminal (12V/10A)<br />
<strong>Bale</strong> pick-up for square and round bales<br />
<strong>Bale</strong> pick-up on the right against the direction of travel<br />
<strong>Bale</strong> deposit on the left<br />
Width changes to 1,820 mm<br />
Film monitoring<br />
Stops the wrapping process if the film tears or runs out<br />
Additional bale guide rollers<br />
LED light and turn signal system - Required connection: 7-pin socket for the entire<br />
lighting system (except work lights)<br />
Electric drive (without hydraulic oil) - operation of the tractor is still possible<br />
4 kW electric motor, return flow filter and 30 l hydraulic oil tank completely installed<br />
Required connections e-motor: 400V/50 Hz, CEE 16A, protection class IP55<br />
PTO shaft drive (without hydraulic oil)<br />
Consisting of gearbox with pump, can be attached to tractor PTO, return flow filter<br />
and 30 l hydraulic oil tank<br />
1-cylinder Honda petrol engine (without hydraulic oil) - operation of the tractor is still<br />
possible<br />
8.2 kW gasoline engine with battery, e-starter, return flow filter and 30 l hydraulic oil<br />
tank<br />
Battery supply cable 5.3 meters 2x6 mm² with 3-pin socket<br />
REQUIRED CONNECTIONS<br />
• 1 pressure connection and 1 depressurized return for supplying the wrapping<br />
machine (not included with PTO shaft drive)<br />
• 3-pin socket for the electrical supply with direct supply to the battery (12V/30A) –<br />
cable cross-section 2x6 mm 2 (with program control PROFI)<br />
7