Application notes for Paetec (Broadsoft platform) - Michael McNamara

More documents

Recommendations

Info

4.1.5 Configure SIP URI This section describes the steps for administering SIP URI configuration in CS1000. � Access EM by IE browser � Choose "IP Network", then choose "Nodes: Servers, Media Cards", select proper Node and press "Edit". � To change SIP URI, select "SIP URI Map". In figure 10, leave the SIP URI fields blank for E.164. QT; Reviewed: SPOC 03/05/2010 Figure 10 – SIP Gateway Services Settings 4.1.6 Configure Zones and Bandwidth Management This section describes the steps for administering Zone configuration in CS1000. � Access EM by IE browser � Choose "IP Network", then choose "Zones", select proper “Zone Basic Property and Bandwidth Management” Figure 11 shows how to configure a zone for IP sets and bandwidth management. If it does not already exist, create a zone for IP sets. The bandwidth strategy can be adjusted to preference. Figure 12 shows how to configure a zone for new created SIP trunks. Solution & Interoperability Test Lab Application Notes ©2010 Avaya Inc. All Rights Reserved. 12 of 95 Paetec Broadsoft&CS1K6
QT; Reviewed: SPOC 03/05/2010 Figure 11 – Zone Basic Property Setting for IP phones Figure 12 – Zone Basic Property Settings for (virtual) SIP trunk Solution & Interoperability Test Lab Application Notes ©2010 Avaya Inc. All Rights Reserved. 13 of 95 Paetec Broadsoft&CS1K6
Page 1 and 2: Avaya Solution & Interoperability T
Page 3 and 4: 1.2. Caveats • The Fax/Modem pass
Page 5 and 6: �� Speech path and display chec
Page 7 and 8: QT; Reviewed: SPOC 03/05/2010 Figur
Page 11: QT; Reviewed: SPOC 03/05/2010 Figur
Page 15 and 16: 2. Create route: Create route 100 u
Page 19 and 20: 4. Create Dialing Plan: Create Spec
Page 21 and 22: Create special number SPN 411 (Use
Page 23 and 24: Create RLI_10 for outgoing calls (U
Page 25 and 26: 4.2. Configure on CS1000 Voicemail
Page 27 and 28: QT; Reviewed: SPOC 03/05/2010 4.2.2
Page 29 and 30: REQ prt TYPE acd CUST 0 ACDN 3109 T
Page 31 and 32: DNX DRE FACD IC1 XTG XDP XLF XBL FK
Page 33 and 34: OPT ABDD AHD BIND BIXA BLA BOHD CFO
Page 35 and 36: LLT OVF DNDT BSY ESAM OVF LDN_DATA
Page 37 and 38: CNTC NATC INTC NIT_DATA NIT1 TIM1 N
Page 39 and 40: TYPE CFN ADAN HIST SIZE 25000 USER
Page 41 and 42: H323 OVLR NO OVLS NO ADAN DCH 101 C
Page 43 and 44: APVL MISP MG_CARD SYNM 0 EXT0 3PE E
Page 47 and 48: �� Create D-channel (DCH) QT; R
Page 49 and 50: �� Create Route Create route 10
Page 53 and 54: Create Distant Steering Code Create
Page 55 and 56: Create Route List Block Create RLI_
Page 57 and 58: Create Digit Manipulation Block DMI
Page 59 and 60: 4.4.2 Configure CS1000E 6.0 B: �
Page 63 and 64:
Create route 101 using DCH 101 for
Page 65 and 66:
Disable Media Security (sRTP) at th
Page 67 and 68:
Create Home Location Code Create HL
Page 69 and 70:
QT; Reviewed: SPOC 03/05/2010 4.4.2
Page 71 and 72:
QT; Reviewed: SPOC 03/05/2010 Figur
Page 73 and 74:
TYPE VAS VAS new VSID 32 - VAS ID n
Page 75 and 76:
SipToneV: SIPN-SIP3-FMCL-TLSV = 0-1
Page 77 and 78:
In order to create a SIP account fo
Page 79 and 80:
QT; Reviewed: SPOC 03/05/2010 Figur
Page 81 and 82:
6 General Test Approach and Test Re
Page 83 and 84:
waiting tone/indication but there i
Page 85 and 86:
Verify status analog phone is busy
Page 87 and 88:
[4] Communication Server 1000 Unifi
Page 89 and 90:
050 Q02031359 p28679 p28725_1 29/03
Page 91 and 92:
2 Yes 25/03/10 NO YES nortel-cs1000
Page 93 and 94:
Define a virtual service route Use
Page 95:
©2010 Avaya Inc. All Rights Reserv
show all

Application notes for Paetec (Broadsoft platform) - Michael McNamara

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?