Application notes for Paetec (Broadsoft platform) - Michael McNamara

More documents

Recommendations

Info

Create DMI_4 for incoming calls from CS1000E_B; Figure 48 Figure 48 – DMI_4 to terminate calls from CS1000E_B Create DMI_6: (Delete: 6) for incoming calls from PSTN and tandem calls to CS1000E_B; Figure 49 Figure 49 – DMI_6 for incoming calls from PSTN and tandem to CS1000E_B QT; Reviewed: SPOC 03/05/2010 Solution & Interoperability Test Lab Application Notes ©2010 Avaya Inc. All Rights Reserved. 58 of 95 Paetec Broadsoft&CS1K6
4.4.2 Configure CS1000E 6.0 B: �� Create IP on CS1000E This section describes the steps for creating Node ID (2001) in CS 1000 network. Enter Element Manager through the IE browser (in IE address bar, type IP address of the Node IP or TLAN of Signalling Server). � Input Node ID and press Add... � Enter TLAN, ELAN IP address of Signalling Server. Node 2001 was added to be configured as the SIP gateway to the Enterprise services, figure 50 QT; Reviewed: SPOC 03/05/2010 Figure 50 – Node Configured as Enterprise Service SIP Gateway Solution & Interoperability Test Lab Application Notes ©2010 Avaya Inc. All Rights Reserved. 59 of 95 Paetec Broadsoft&CS1K6
Page 1 and 2:
Avaya Solution & Interoperability T
Page 3 and 4:
1.2. Caveats • The Fax/Modem pass
Page 5 and 6:
�� Speech path and display chec
Page 7 and 8: QT; Reviewed: SPOC 03/05/2010 Figur
Page 15 and 16: 2. Create route: Create route 100 u
Page 19 and 20: 4. Create Dialing Plan: Create Spec
Page 21 and 22: Create special number SPN 411 (Use
Page 23 and 24: Create RLI_10 for outgoing calls (U
Page 25 and 26: 4.2. Configure on CS1000 Voicemail
Page 27 and 28: QT; Reviewed: SPOC 03/05/2010 4.2.2
Page 29 and 30: REQ prt TYPE acd CUST 0 ACDN 3109 T
Page 31 and 32: DNX DRE FACD IC1 XTG XDP XLF XBL FK
Page 33 and 34: OPT ABDD AHD BIND BIXA BLA BOHD CFO
Page 35 and 36: LLT OVF DNDT BSY ESAM OVF LDN_DATA
Page 37 and 38: CNTC NATC INTC NIT_DATA NIT1 TIM1 N
Page 39 and 40: TYPE CFN ADAN HIST SIZE 25000 USER
Page 41 and 42: H323 OVLR NO OVLS NO ADAN DCH 101 C
Page 43 and 44: APVL MISP MG_CARD SYNM 0 EXT0 3PE E
Page 47 and 48: �� Create D-channel (DCH) QT; R
Page 49 and 50: �� Create Route Create route 10
Page 53 and 54: Create Distant Steering Code Create
Page 55 and 56: Create Route List Block Create RLI_
Page 57: Create Digit Manipulation Block DMI
Page 63 and 64: Create route 101 using DCH 101 for
Page 65 and 66: Disable Media Security (sRTP) at th
Page 67 and 68: Create Home Location Code Create HL
Page 69 and 70: QT; Reviewed: SPOC 03/05/2010 4.4.2
Page 73 and 74: TYPE VAS VAS new VSID 32 - VAS ID n
Page 75 and 76: SipToneV: SIPN-SIP3-FMCL-TLSV = 0-1
Page 77 and 78: In order to create a SIP account fo
Page 81 and 82: 6 General Test Approach and Test Re
Page 83 and 84: waiting tone/indication but there i
Page 85 and 86: Verify status analog phone is busy
Page 87 and 88: [4] Communication Server 1000 Unifi
Page 89 and 90: 050 Q02031359 p28679 p28725_1 29/03
Page 91 and 92: 2 Yes 25/03/10 NO YES nortel-cs1000
Page 93 and 94: Define a virtual service route Use
Page 95: ©2010 Avaya Inc. All Rights Reserv
show all

Application notes for Paetec (Broadsoft platform) - Michael McNamara

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?