Application notes for Paetec (Broadsoft platform) - Michael McNamara

Verify status analog phone is busy
LD 32
.stat 4 0 8
00 = UNIT 00 = BUSY (L500)
01 = UNIT 01 = BUSY (L500)
Verify status of voice gateway if calls are established between IP phone/SIP line Clients to
Analog/Digital phones or call to voice message
>>ld 32
NPR000
.stat 4 0 11
00 = UNIT 00 = BUSY (TRK)(IPTN REG )
01 = UNIT 01 = BUSY (TRK)(IPTN REG )
02 = UNIT 02 = BUSY (TRK)(IPTN REG )
03 = UNIT 03 = BUSY (TRK)(IPTN REG )
During the call, use pcap tool (ethereal/wireshark) at the TLAN media gateway card, RTP
streams are going for call relate to analog, digital or voice message.
7.5 Verify that calls are established with two-way voice path
when making calls from PSTN phone to Avaya phones on
the CS1000 through Paetec Communication system via
configured SIP trunk.
� Verify basic call between PSTN phones and Avaya phones. At the CS1000E SIP
Gateway during the call, use pcap tool (ethereal/wireshark) to make sure that all SIP
request/response messages
� Verify Codec, SIP trunk status when call is established under CS1000E call server by
tracing DID number
LD 80
.trac 0 496856
ACTIVE VTN 096 0 01 06
ORIG VTN 096 0 01 06 KEY 0 SCR MARP CUST 0 DN 496856 TYPE 2002P2
SIGNALLING ENCRYPTION: INSEC
MEDIA ENDPOINT IP: 47.248.101.120 PORT: 5200
TERM VTN 100 0 00 31 VTRK IPTI RMBR 100 32 OUTGOING VOIP GW CALL
FAR-END SIP SIGNALLING IP: 217.110.230.98
FAR-END MEDIA ENDPOINT IP: 217.110.230.97 PORT: 6478
FAR-END VendorID: Not available
QT; Reviewed:
SPOC 03/05/2010
Solution & Interoperability Test Lab Application Notes
©2010 Avaya Inc. All Rights Reserved.
85 of 95
Paetec Broadsoft&CS1K6