Dell OpenManage Server Administrator User's Guide - Dell Support

a vicfg-snmp.pl --server --username
root --password -c
-p X –t @162/
Where X represents an unused port. To find an unused port, check the
/etc/services file for the port assignment for defined system services. Also,
to make sure that the port selected is not currently being used by any
application/service, run the following command on the ESX server:
netstat –a command
NOTE: Multiple IP addresses can be entered using a comma-separated list.
b To enable VMWare SNMP service, run the following command:
vicfg-snmp.pl --server --username
root --password
-E
c To view the configuration settings, run the following command:
vicfg-snmp.pl --server --username
root --password
-s
After modification, the configuration file looks like this:
true
public
143.166.152.248@162/public
167
2 Stop the SNMP service if it is already running on your system by entering
the following command:
40 Setup and Administration