AKE Brochure EN
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
BUSINESS DIVISION VEHICLE INTERIOR<br />
Our Verinno - the edge-folding system available in different sizes<br />
In the Vehicle Interior business division, our edgefolding<br />
systems for processing arm rests, doorpulls, or<br />
interior panels are a main application.<br />
Our Verinno consists of a press system – called<br />
a “clasp” – and as many rapid-change tools as<br />
necessary. All component-specific functions for<br />
processing the respective product are saved directly<br />
in the tool. This means that any tool in any clasp is able<br />
to function without programming effort.<br />
The <strong>AKE</strong> systems can be used flexibly at different<br />
locations, and are characterised by output of<br />
components which are 100% free of reworking. On<br />
request, <strong>AKE</strong> also supports its customers in the design<br />
and construction of trimmers and of energy direction<br />
sensors. The Verinno is used above all in edge-folding<br />
processes for back-moulded column coverings, and<br />
has established itself with many automotive suppliers<br />
as the standard system.<br />
We have now further developed the system: the<br />
same principle, but much more space in the tool, and<br />
32 tons press force. Amongst other things, this XL<br />
variant of the Verinno is used for laminating car boot<br />
load trays or parcel shelves. The system can process<br />
components of sizes up to 1100 x 1700 mm. For this,<br />
it is possible to link the system to various upstream<br />
or downstream processes. Also for the larger system<br />
the intelligence is located in the tool, similar to our<br />
standard Verinno. Numerous manufacturing and<br />
assembly processes can be implemented in the<br />
Verinno, such as laminating, edge-folding, assembly,<br />
stamping, welding, or riveting.<br />
The <strong>AKE</strong> Verinno is now available in three different<br />
sizes: our standard Verinno for numerous applications,<br />
from arm rests to column coverings – a smaller variant<br />
for special applications which have to implemented in<br />
the minimum of space – and now, completely new,<br />
the XL Verinno, which is used for large components<br />
and where a higher press force is required. With<br />
these three sizes, we can optimally cover the various<br />
requirements of our customers and respond to their<br />
needs.<br />
Standard Verinno for<br />
edge-folding processes<br />
on column coverings<br />
Assembly system for car boot<br />
load trays using two integrated XL<br />
Verinnos<br />
Press system<br />
Exchangeable tool<br />
14