Junos OS Ethernet Interfaces Configuration Guide - Juniper Networks

Junos ®
OS 12.2 Ethernet Interfaces Configuration Guide
version-3
574
Related
Documentation
• Configuring Logical Interface Properties
• Example: Configuring E-LINE and E-LAN Services for a PBB Network on MX Series
Routers
Syntax version-3;
• Junos OS Services Interfaces Configuration Guide
Hierarchy Level [edit protocols vrrp]
Release Information Statement introduced in Junos OS Release 12.2.
Description Enable Virtual Router Redundancy Protocol version 3 (VRRPv3).
Required Privilege
Level
Related
Documentation
NOTE:
• Even though the version-3 statement can be configured only at the [edit
protocols vrrp] hierarchy level, VRRPv3 is enabled on all the configured
logical systems as well.
• When enabling VRRPv3, you must ensure that VRRPv3 is enabled on all
the VRRP routers in the network. This is because VRRPv3 does not
interoperate with the previous versions of VRRP.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Junos OS Support for VRRPv3
• VRRP Configuration Hierarchy
• VRRP for IPv6 Configuration Hierarchy
Copyright © 2012, Juniper Networks, Inc.