6009757_C-Fork Positioner Service Manual - Cascade Corporation
6009757_C-Fork Positioner Service Manual - Cascade Corporation
6009757_C-Fork Positioner Service Manual - Cascade Corporation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
I NSTALLATION<br />
2.2 Recommended<br />
Hydraulic Supply<br />
Options<br />
B<br />
C-Series <strong>Fork</strong> <strong>Positioner</strong>s can be operated with any of the<br />
hydraulic supply arrangements shown below. Refer to<br />
<strong>Cascade</strong> Hose & Cable Reel Selection Guide, Part No.<br />
212199, to select the correct hose reel for the mast and<br />
truck. Hose and fitting requirements are as follows:<br />
• All hoses and fittings for the fork-positioning and<br />
sideshifting (if equipped) functions should be at least<br />
No. 6 with 9/32 in. (7 mm) minimum I.D.<br />
GA0033.ill<br />
<strong>6009757</strong> Rev. 0 3<br />
C<br />
A<br />
Non-Sideshifting<br />
A Mast Single Internal Reeving<br />
OR<br />
B RH THINLINE� 2-Port Hose Reel Group<br />
Sideshifting<br />
A Mast Double Internal Reeving<br />
OR<br />
A and B Mast Single Internal Reeving and<br />
RH THINLINE� 2-Port Hose Reel<br />
Group<br />
OR<br />
B and C RH and LH THINLINE� 2-Port Hose<br />
Reel Groups<br />
Solenoid Adaption<br />
A and B Mast Single Internal Reeving and<br />
RH Cable Reel Group<br />
OR<br />
B RH 6-N-1 Cable/Hose Reel Group