#Daylight + lighting

More documents

Recommendations

Info

02. daylight + lighting 11(23) Calculating Daylight: ASSUMPTIONS ● It is applicable to rooms/ spaces with windows in one wall only. ● It assumes a standard overcast sky. ● It assumes a clear glazing with a diffuse transmission of 0.85 (other types of glass have differing transmission rates.) ● It assumes the glazing is clean. Required Task Illuminance (lighting levels) Measured in Lux (Lx) Minimum recommended service values of illuminance for various indoor tasks are set out in Australian Standards AS 1680. Interior and workplace lighting Part 1: General principles and recommendations. A typical chart is on the following page...
Light illuminance measured in lux (lx). Specific tasks require specific task and ambient light levels. While the calculation of such requirements is determined by a lighting engineer, it is still important to understand basic lighting level requirements. Area highlighted is for an architectural workstation.
Page 1 and 2: design sustainable buildings daylig
Page 3 and 4: sunlight + shading Solar Gain This
Page 5 and 6: emotive • windows and roof lights
Page 7 and 8: strategies • provide solar shadin
Page 9 and 10: 02.daylight+lighting 1(23) introduc
Page 11 and 12: 02.daylight+lighting 3(23) Glazing
Page 13 and 14: 02.daylight+lighting 4(23) Psycholo
Page 15 and 16: 02.daylight+lighting 6(23) louvres
Page 17 and 18: 02.daylight+lighting 8(23) light em
Page 19: 02. daylight + lighting 10(23) Dayl
Page 23 and 24: This graph is used to determine a S
Page 25 and 26: 02. daylight + lighting 16(23) obst
Page 27 and 28: 02. daylight + lighting 18(23) Wind
Page 29 and 30: 20(23) Obstruction Modification: As
Page 31 and 32: worked example Step 1 Using the ext

#Daylight + lighting

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?