The Incinerator Guidebook: A Practical Guide for Selecting ... - SSWM

Material Quantity General description
Column for front side of
primary chamber
1 set -
Column for back side of
primary chamber and in the
secondary chamber
6 nos. -
Tunnel 1 set Tunnel joining primary and secondary chambers at the
bottom
Fabrication drawing for 3 stack -
general stack arrangement (2 pipes; 1
sheets)
set of
comps
A self adjusting draft control 1 set Operating temperature: 0–800°C; 6" draft
and tee for chimney
control; fine-threaded adjustment stud with
balance weight on end; gives good regulation;
draft regulated by turning adjustment screw;
made of 28-gauge blued steel; adjustment range
.01" to .12".
Stovepipe thermocouple and
analogue dial indicator
1 Range 0–1200°C
Refractory brick 225 nos. Dimensions: length (228–232 mm), width (114–116
mm), height (60–85 mm)
Temperature range: up to 1200°C
Composition: Al2O3 (>40%), Fe2O3 (