20.02.2020 Views

UNITROL SOFT TOUCH Manual for Welders

UNITROL SOFT TOUCH Manual for Welders The SOFT TOUCH Pinch-Point Safety System is the first and only fully passive safeguarding equipment designed to prevent a spot welder, a riveter or other small machine from applying full force if it detects fingers in the machine’s point-of-operation area. SOFT TOUCH prevents hand injuries and eliminates associated expenses such as hospitalization, lost days of work, higher insurance premiums and legal action. It does all this while not slowing down manufacturing operations. OSHA-compliant SOFT TOUCH technology will take you from pinch-point to pinch-proof without losing a minute of productivity. https://www.rockfordsystems.com/unitrol-soft-touch/ https://www.rockfordsystems.com/product/unitrol-soft-touch-pinch-point-safety-system-for-welders/

UNITROL SOFT TOUCH Manual for Welders
The SOFT TOUCH Pinch-Point Safety System is the first and only fully passive safeguarding equipment designed to prevent a spot welder, a riveter or other small machine from applying full force if it detects fingers in the machine’s point-of-operation area. SOFT TOUCH prevents hand injuries and eliminates associated expenses such as hospitalization, lost days of work, higher insurance premiums and legal action. It does all this while not slowing down manufacturing operations. OSHA-compliant SOFT TOUCH technology will take you from pinch-point to pinch-proof without losing a minute of productivity.
https://www.rockfordsystems.com/unitrol-soft-touch/
https://www.rockfordsystems.com/product/unitrol-soft-touch-pinch-point-safety-system-for-welders/

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

OPTIONAL TIMED DELAY RST-402<br />

Some materials being welded have coatings or other<br />

conditions that prevent good continuity between electrodes.<br />

For these conditions option #RST-402 will all ow the welder<br />

to be operated using TIMING rather than CONTINUITY to<br />

switch from low <strong>for</strong>ce to high welding <strong>for</strong>ce. In this case, the<br />

low <strong>for</strong>ce will be applied <strong>for</strong> the time set on the 4-position<br />

DETECT TIME DIPswitch, and then the high welding <strong>for</strong>ce<br />

will turn on. The time from initiation to high <strong>for</strong>ce is the SUM<br />

of the switches pushed down on top.<br />

CAUTION: When the key switch is in the TIMED<br />

position, the HIGH WELDING FORCE will turn on after<br />

the selected delay (detect) time unless initiation is<br />

opened. This will happen even if a non-conductive<br />

material or body part is between the electrodes.<br />

This option will be factory wired and supplied with the faceplate.<br />

24 | <strong>SOFT</strong> <strong>TOUCH</strong> FOR WELDERS

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!