20.12.2012 Views

DSView™ 4 Installer/User Guide - Emerson Network Power

DSView™ 4 Installer/User Guide - Emerson Network Power

DSView™ 4 Installer/User Guide - Emerson Network Power

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Unit type Status and Icon Icon Description<br />

Any unit Idle N/A The unit is powered up with no connection.<br />

Any unit In Use The unit has at least one active connection.<br />

Any unit Status Unknown<br />

The status of the unit was reported to the software<br />

but cannot be obtained for an unknown reason.<br />

Target devices No <strong>Power</strong> The target device is powered down.<br />

Target devices KVM Blocked<br />

Target devices<br />

No device attached<br />

(topology view only)<br />

Target devices Partial <strong>Power</strong><br />

Managed appliances<br />

Not Responding<br />

The connection path to the target device is blocked<br />

because a cascade switch is already in use.<br />

The port does not have a target device attached.<br />

The DSView software cannot determine the power<br />

state of the target device, or the software received a<br />

mixed power state from the target device. For example,<br />

if a target device has a KVM connection and a<br />

power device connection, the software will prompt for<br />

a power status for both of these connections. If both<br />

connections do not reply with ON or OFF, the power<br />

status will display as Partial <strong>Power</strong>.<br />

The managed appliance did not provide status information.<br />

This may occur for multiple reasons, such as<br />

the appliance is not powered up or it is disconnected<br />

from the DSView software system.<br />

� ������ � ���� �� ������� ���� ��� �� ���������� �������� � ���� ��� ���� �������� �������<br />

���� ��� �� ��������� ���� �������� ��� ��� �� ���� �� ������ � ������ ������ ����� �<br />

������� ������� �� � ������ ��������� ���� ��� ������ ���� �� ����������<br />

NOTE: Actions are also available from Connections windows.<br />

������� �� ����� ���� ������� 121<br />

��� �������� � ������ ������ ���� �� ���� �������� �� � ������ ������� ��������� ���� ���<br />

������� � ��� ������� ����� �� � ������ ������ ��� � ���������� �� ���� � ������<br />

������� ��������� ��� � ��� ������� � ��� ������� ���� ���� �������<br />

�� ����� �� ������ ���� ����� ��������� ������� ���� ���� ���� ������� ��� ��<br />

�������� �� �������� ��� ��������� ������� ����� �� ��� ����� �� ��� ������ ���� ���<br />

������� ����������� �������� �� ��� �� ��� ��������� ����� ���� ������ ���<br />

������������� ������ �����

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!