DSViewâ¢ 4 Installer/User Guide - Emerson Network Power

More documents

Recommendations

Info

224 �� Logging in with a <strong>User</strong> SSH key � �� Establishing an SSH Passthrough connection to a unit To establish an SSH Passthrough connection to a target device or appliance console: NOTE: If you are using the Linux or Unix SSH command, you will need to specify the port by entering -p and the port number. The default port number is 4122. For more information or to change the port number, see Enabling SSH Passthrough on page 221. �� : �� @ �� @ �� NOTE: If DS Zones are not enabled, you do not need to specify a zone for the username or appliance. For more information about zones, see DS Zones on page 247. �� :@ �� ssh -p 4122 zone1/jsmith:zone2/Boston@172.30.19.101 �� :@
�� ssh -p 4122 zone1/jsmith:zone2/ACS_Lab:@172.30.19.101 NOTE: The colon is used to delimit different arguments; however, if a colon is contained within the name, then a double backslash may be used as an escape sequence to include the colon in the name. For example, if the username is “sanders:”, a command to open an SSH session to a target device may look like this: ssh -p 4122 zone1/sanders\\::zone2/Boston:5@172.26.5.100 �� 225 �� : � :port@ � �� :@
Page 1:
DSView 4 Management Software ��
Page 5 and 6:
TABLE OF CONTENTS Product Overview
Page 7 and 8:
��
Page 9 and 10:
��
Page 11 and 12:
��
Page 13 and 14:
��
Page 15 and 16:
��
Page 17 and 18:
1 Product Overview ��
Page 19 and 20:
System Components ��
Page 21 and 22:
Cyclades ACS advanced console serve
Page 23 and 24:
� ��
Page 25 and 26:
Number Description Number Descripti
Page 27 and 28:
2 Installation ��
Page 29 and 30:
��
Page 31 and 32:
��
Page 33 and 34:
� ��
Page 35 and 36:
��
Page 37 and 38:
� ��
Page 39 and 40:
Uninstalling the DSView Software To
Page 41 and 42:
��
Page 43 and 44:
3 DSView Explorer Windows ��
Page 45 and 46:
Figure 3.2: Example Side Navigation
Page 47 and 48:
Typed in the Filter Field Results
Page 49 and 50:
� ��
Page 51 and 52:
Using keyboard commands ��
Page 53 and 54:
4 Basic Operations ��
Page 55 and 56:
� ��
Page 57 and 58:
Profiles ��
Page 59 and 60:
Choosing the serial session applica
Page 61 and 62:
��
Page 63 and 64:
Preemption Levels ��
Page 65 and 66:
��
Page 67 and 68:
��
Page 69 and 70:
��
Page 71 and 72:
Feature Value when enabled Certific
Page 73 and 74:
��
Page 75 and 76:
Page 77 and 78:
Licenses Number Description Number
Page 79 and 80:
� ��
Page 81 and 82:
5 DSView Servers ��
Page 83 and 84:
��
Page 85 and 86:
��
Page 87 and 88:
��
Page 89 and 90:
� ��
Page 91 and 92:
��
Page 93 and 94:
Backing up and Restoring Hub Server
Page 95 and 96:
��
Page 97 and 98:
Status Cause Hub/Spoke Versions Not
Page 99 and 100:
��
Page 101 and 102:
��
Page 103 and 104:
6 Authentication Services ��
Page 105 and 106:
��
Page 107 and 108:
��
Page 109 and 110:
��
Page 111 and 112:
��
Page 113 and 114:
��
Page 115 and 116:
��
Page 117 and 118:
��
Page 119 and 120:
��
Page 121 and 122:
��
Page 123 and 124:
��
Page 125 and 126:
��
Page 127 and 128:
��
Page 129 and 130:
��
Page 131 and 132:
7 Units View Windows ��
Page 133 and 134:
��
Page 135 and 136:
��
Page 137 and 138:
Unit type Status and Icon Icon Desc
Page 139 and 140:
Action link Displays Valid for* Tel
Page 141 and 142:
��
Page 143 and 144:
To initiate a session with a target
Page 145 and 146:
8 Adding and Deleting Units ��
Page 147 and 148:
��
Page 149 and 150:
��
Page 151 and 152:
��
Page 153 and 154:
��
Page 155 and 156:
Automatically deleting attached uni
Page 157 and 158:
9 Synchronizing the DSView Software
Page 159 and 160:
��
Page 161 and 162:
Manual name push ��
Page 163 and 164:
��
Page 165 and 166:
��
Page 167 and 168:
��
Page 169 and 170:
��
Page 171 and 172:
10 Managing Units ��
Page 173 and 174:
��
Page 175 and 176:
��
Page 177 and 178:
��
Page 179 and 180:
��
Page 181 and 182:
��
Page 183 and 184:
��
Page 185 and 186:
��
Page 187 and 188:
To change service options: ��
Page 189 and 190: ��
Page 191 and 192: ��
Page 193 and 194: ��
Page 195 and 196: ��
Page 197 and 198: Embedded Units ��
Page 199 and 200: � ��
Page 201 and 202: 11 Power Devices and Power Device S
Page 203 and 204: ��
Page 205 and 206: ��
Page 207 and 208: ��
Page 209 and 210: 12 Unit Sessions and Connections
Page 211 and 212: ��
Page 213 and 214: ��
Page 215 and 216: ��
Page 217 and 218: ��
Page 219 and 220: ��
Page 221 and 222: Connections to Units ��
Page 223 and 224: ��
Page 225 and 226: 13 Data Logging ��
Page 227 and 228: � ��
Page 229 and 230: � ��
Page 231 and 232: � ��
Page 233 and 234: ��
Page 235 and 236: ��
Page 237 and 238: 14 SSH Passthrough Sessions ��
Page 239: ��
Page 243 and 244: To enter an escape key sequence:
Page 245 and 246: ��
Page 247 and 248: 15 Grouping Units ��
Page 249 and 250: ��
Page 251 and 252: ��
Page 253 and 254: Figure 15.1: Custom Fields Example:
Page 255 and 256: Group Type System Defined Can chang
Page 257 and 258: ��
Page 259 and 260: To delete a unit group: NOTE: Delet
Page 261 and 262: ��
Page 263 and 264: 16 DS Zones ��
Page 265 and 266: ��
Page 267 and 268: Managing zone access rights ��
Page 269 and 270: Action User Status Required for Act
Page 275 and 276: 17 Managing User Accounts ��
Page 277 and 278: � ��
Page 279 and 280: ��
Page 281 and 282: Changing User Account Properties Us
Page 283 and 284: ��
Page 285 and 286: ��
Page 287 and 288: User Access Rights ��
Page 289 and 290: 18 User Groups ��
Page 291 and 292:
� ��
Page 293 and 294:
��
Page 295 and 296:
��
Page 297 and 298:
19 Using the Video Viewer ��
Page 299 and 300:
Figure 19.1: Video Viewer Window (N
Page 301 and 302:
��
Page 303 and 304:
��
Page 305 and 306:
Keystrokes and Keystroke Combinatio
Page 307 and 308:
Single cursor mode - release keystr
Page 309 and 310:
��
Page 311 and 312:
��
Page 313 and 314:
To assign a KVM session profile to
Page 315 and 316:
To specify a key for exiting single
Page 317 and 318:
To set mouse scaling: ��
Page 319 and 320:
Figure 19.2: Manual Video Adjust Di
Page 321 and 322:
Automatic video adjustment NOTE: Yo
Page 323 and 324:
��
Page 325 and 326:
Number Description 3 4 5 Minimize b
Page 327 and 328:
��
Page 329 and 330:
To delete a macro: ��
Page 331 and 332:
��
Page 333 and 334:
��
Page 335 and 336:
Opening a virtual media session �
Page 337 and 338:
Closing a virtual media session To
Page 339 and 340:
20 Using the Telnet Viewer ��
Page 341 and 342:
Number Description 1 Title Bar: Dis
Page 343 and 344:
��
Page 345 and 346:
��
Page 347 and 348:
To enable/disable local echo: �
Page 349 and 350:
Macros ��
Page 351 and 352:
��
Page 353 and 354:
Logging To delete a macro group:
Page 355 and 356:
��
Page 357 and 358:
��
Page 359 and 360:
21 Using Tools ��
Page 361 and 362:
��
Page 363 and 364:
��
Page 365 and 366:
��
Page 367 and 368:
��
Page 369 and 370:
��
Page 371 and 372:
22 Using Tasks ��
Page 373 and 374:
��
Page 375 and 376:
��
Page 377 and 378:
��
Page 379 and 380:
Task: Exporting an Asset Report to
Page 381 and 382:
��
Page 383 and 384:
��
Page 385 and 386:
��
Page 387 and 388:
Deleting tasks NOTE: Remote tasks,
Page 389 and 390:
��
Page 391 and 392:
23 Events and Event Logs ��
Page 393 and 394:
� ��
Page 395 and 396:
� ��
Page 397 and 398:
��
Page 399 and 400:
Using the date filter ��
Page 401 and 402:
��
Page 403 and 404:
24 Plug-ins � ��
Page 405 and 406:
NOTE: If you added a plug-in for a
Page 407 and 408:
Managing Plug-ins ��
Page 409 and 410:
APPENDICES Appendix A: Technical Su
Page 411 and 412:
Appendix B: TCP and UDP Ports �
Page 413 and 414:
Figure B.1: Ports Used with a KVM S
Page 415 and 416:
Figure B.2: Ports Used with a KVM S
Page 417 and 418:
�� 401
Page 419 and 420:
Figure B.5: Generic Appliance Table
Page 421 and 422:
Figure B.6: External Authentication
Page 423 and 424:
�� 407
Page 425 and 426:
Appendix C: DSR Remote Operations S
Page 427 and 428:
Page 429 and 430:
��
Page 431 and 432:
Number Description 1 Menu bar: Allo
Page 433 and 434:
Managing servers To connect to a se
Page 435 and 436:
Appendix D: Terminal Emulation �
Page 437 and 438:
VT102 Receive Code Insert Line (IL)
Page 439 and 440:
��
Page 441 and 442:
Control Sequence Definition Encode/
Page 443 and 444:
Control Sequence Definition Encode/
Page 445 and 446:
VT220 Keyboard PC Keyboard F16 Ctrl
Page 447 and 448:
VT220 Keyboard Function VT220 Keybo
Page 449 and 450:
Keys Keypad Numeric Code VT52 Keypa
Page 451 and 452:
VT320 Keyboard Function VT320 Keybo
Page 453 and 454:
��
Page 455 and 456:
��
Page 457 and 458:
��
Page 459 and 460:
��
Page 461 and 462:
IQ module ��
Page 463 and 464:
��
Page 465 and 466:
��
Page 467 and 468:
��
Page 469:
590-��-501A
show all

DSViewâ¢ 4 Installer/User Guide - Emerson Network Power

Create successful ePaper yourself

Delete template?

Save as template?

DSViewâ¢ 4 Installer/User Guide - Emerson Network Power