DSViewâ¢ 4 Installer/User Guide - Emerson Network Power

More documents

Recommendations

Info

318 �� Virtual media session settings �� Table 19.5: Virtual Media Session Settings Setting Description Locking Mapped drives access mode Encryption level The locking option specifies whether a virtual media session is locked to the KVM session on the target device. When locking is enabled (which is the default) and the KVM session is closed, the virtual media session will also be closed. When locking is disabled and the KVM session is closed, the virtual media session will remain active. You may set the access mode for mapped drives to read-only or read-write. When the access mode is read-only, the user will not be able to write data to the mapped drive on the client workstation. When the access mode is read-write, the user will be able to read and write data from/to the mapped drive. If the mapped drive is read-only by design (for example, certain CD/DVD drives or ISO images), the configured readwrite access mode will be ignored. Setting the read-only mode can be helpful when a read-write drive such as a mass storage device or a USB removable media is mapped, and you wish to prevent the user from writing data to it. You may configure up to three encryption levels (or none) for virtual media sessions. Any combination is valid. The choices are: DES, 3DES, 128-bit SSL and AES. The default is no encryption (no encryption levels selected).
Opening a virtual media session �� 319 To launch a virtual media session: �� To map a virtual media drives: ��
Page 1:
DSView 4 Management Software ��
Page 5 and 6:
TABLE OF CONTENTS Product Overview
Page 7 and 8:
��
Page 9 and 10:
��
Page 11 and 12:
��
Page 13 and 14:
��
Page 15 and 16:
��
Page 17 and 18:
1 Product Overview ��
Page 19 and 20:
System Components ��
Page 21 and 22:
Cyclades ACS advanced console serve
Page 23 and 24:
� ��
Page 25 and 26:
Number Description Number Descripti
Page 27 and 28:
2 Installation ��
Page 29 and 30:
��
Page 31 and 32:
��
Page 33 and 34:
� ��
Page 35 and 36:
��
Page 37 and 38:
� ��
Page 39 and 40:
Uninstalling the DSView Software To
Page 41 and 42:
��
Page 43 and 44:
3 DSView Explorer Windows ��
Page 45 and 46:
Figure 3.2: Example Side Navigation
Page 47 and 48:
Typed in the Filter Field Results
Page 49 and 50:
� ��
Page 51 and 52:
Using keyboard commands ��
Page 53 and 54:
4 Basic Operations ��
Page 55 and 56:
� ��
Page 57 and 58:
Profiles ��
Page 59 and 60:
Choosing the serial session applica
Page 61 and 62:
��
Page 63 and 64:
Preemption Levels ��
Page 65 and 66:
��
Page 67 and 68:
��
Page 69 and 70:
��
Page 71 and 72:
Feature Value when enabled Certific
Page 73 and 74:
��
Page 75 and 76:
Page 77 and 78:
Licenses Number Description Number
Page 79 and 80:
� ��
Page 81 and 82:
5 DSView Servers ��
Page 83 and 84:
��
Page 85 and 86:
��
Page 87 and 88:
��
Page 89 and 90:
� ��
Page 91 and 92:
��
Page 93 and 94:
Backing up and Restoring Hub Server
Page 95 and 96:
��
Page 97 and 98:
Status Cause Hub/Spoke Versions Not
Page 99 and 100:
��
Page 101 and 102:
��
Page 103 and 104:
6 Authentication Services ��
Page 105 and 106:
��
Page 107 and 108:
��
Page 109 and 110:
��
Page 111 and 112:
��
Page 113 and 114:
��
Page 115 and 116:
��
Page 117 and 118:
��
Page 119 and 120:
��
Page 121 and 122:
��
Page 123 and 124:
��
Page 125 and 126:
��
Page 127 and 128:
��
Page 129 and 130:
��
Page 131 and 132:
7 Units View Windows ��
Page 133 and 134:
��
Page 135 and 136:
��
Page 137 and 138:
Unit type Status and Icon Icon Desc
Page 139 and 140:
Action link Displays Valid for* Tel
Page 141 and 142:
��
Page 143 and 144:
To initiate a session with a target
Page 145 and 146:
8 Adding and Deleting Units ��
Page 147 and 148:
��
Page 149 and 150:
��
Page 151 and 152:
��
Page 153 and 154:
��
Page 155 and 156:
Automatically deleting attached uni
Page 157 and 158:
9 Synchronizing the DSView Software
Page 159 and 160:
��
Page 161 and 162:
Manual name push ��
Page 163 and 164:
��
Page 165 and 166:
��
Page 167 and 168:
��
Page 169 and 170:
��
Page 171 and 172:
10 Managing Units ��
Page 173 and 174:
��
Page 175 and 176:
��
Page 177 and 178:
��
Page 179 and 180:
��
Page 181 and 182:
��
Page 183 and 184:
��
Page 185 and 186:
��
Page 187 and 188:
To change service options: ��
Page 189 and 190:
��
Page 191 and 192:
��
Page 193 and 194:
��
Page 195 and 196:
��
Page 197 and 198:
Embedded Units ��
Page 199 and 200:
� ��
Page 201 and 202:
11 Power Devices and Power Device S
Page 203 and 204:
��
Page 205 and 206:
��
Page 207 and 208:
��
Page 209 and 210:
12 Unit Sessions and Connections
Page 211 and 212:
��
Page 213 and 214:
��
Page 215 and 216:
��
Page 217 and 218:
��
Page 219 and 220:
��
Page 221 and 222:
Connections to Units ��
Page 223 and 224:
��
Page 225 and 226:
13 Data Logging ��
Page 227 and 228:
� ��
Page 229 and 230:
� ��
Page 231 and 232:
� ��
Page 233 and 234:
��
Page 235 and 236:
��
Page 237 and 238:
14 SSH Passthrough Sessions ��
Page 239 and 240:
��
Page 241 and 242:
��
Page 243 and 244:
To enter an escape key sequence:
Page 245 and 246:
��
Page 247 and 248:
15 Grouping Units ��
Page 249 and 250:
��
Page 251 and 252:
��
Page 253 and 254:
Figure 15.1: Custom Fields Example:
Page 255 and 256:
Group Type System Defined Can chang
Page 257 and 258:
��
Page 259 and 260:
To delete a unit group: NOTE: Delet
Page 261 and 262:
��
Page 263 and 264:
16 DS Zones ��
Page 265 and 266:
��
Page 267 and 268:
Managing zone access rights ��
Page 269 and 270:
Action User Status Required for Act
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
17 Managing User Accounts ��
Page 277 and 278:
� ��
Page 279 and 280:
��
Page 281 and 282:
Changing User Account Properties Us
Page 283 and 284: ��
Page 285 and 286: ��
Page 287 and 288: User Access Rights ��
Page 289 and 290: 18 User Groups ��
Page 291 and 292: � ��
Page 293 and 294: ��
Page 295 and 296: ��
Page 297 and 298: 19 Using the Video Viewer ��
Page 299 and 300: Figure 19.1: Video Viewer Window (N
Page 301 and 302: ��
Page 303 and 304: ��
Page 305 and 306: Keystrokes and Keystroke Combinatio
Page 307 and 308: Single cursor mode - release keystr
Page 309 and 310: ��
Page 311 and 312: ��
Page 313 and 314: To assign a KVM session profile to
Page 315 and 316: To specify a key for exiting single
Page 317 and 318: To set mouse scaling: ��
Page 319 and 320: Figure 19.2: Manual Video Adjust Di
Page 321 and 322: Automatic video adjustment NOTE: Yo
Page 323 and 324: ��
Page 325 and 326: Number Description 3 4 5 Minimize b
Page 327 and 328: ��
Page 329 and 330: To delete a macro: ��
Page 331 and 332: ��
Page 333: ��
Page 337 and 338: Closing a virtual media session To
Page 339 and 340: 20 Using the Telnet Viewer ��
Page 341 and 342: Number Description 1 Title Bar: Dis
Page 343 and 344: ��
Page 345 and 346: ��
Page 347 and 348: To enable/disable local echo: �
Page 349 and 350: Macros ��
Page 351 and 352: ��
Page 353 and 354: Logging To delete a macro group:
Page 355 and 356: ��
Page 357 and 358: ��
Page 359 and 360: 21 Using Tools ��
Page 361 and 362: ��
Page 363 and 364: ��
Page 365 and 366: ��
Page 367 and 368: ��
Page 369 and 370: ��
Page 371 and 372: 22 Using Tasks ��
Page 373 and 374: ��
Page 375 and 376: ��
Page 377 and 378: ��
Page 379 and 380: Task: Exporting an Asset Report to
Page 381 and 382: ��
Page 383 and 384: ��
Page 385 and 386:
��
Page 387 and 388:
Deleting tasks NOTE: Remote tasks,
Page 389 and 390:
��
Page 391 and 392:
23 Events and Event Logs ��
Page 393 and 394:
� ��
Page 395 and 396:
� ��
Page 397 and 398:
��
Page 399 and 400:
Using the date filter ��
Page 401 and 402:
��
Page 403 and 404:
24 Plug-ins � ��
Page 405 and 406:
NOTE: If you added a plug-in for a
Page 407 and 408:
Managing Plug-ins ��
Page 409 and 410:
APPENDICES Appendix A: Technical Su
Page 411 and 412:
Appendix B: TCP and UDP Ports �
Page 413 and 414:
Figure B.1: Ports Used with a KVM S
Page 415 and 416:
Figure B.2: Ports Used with a KVM S
Page 417 and 418:
�� 401
Page 419 and 420:
Figure B.5: Generic Appliance Table
Page 421 and 422:
Figure B.6: External Authentication
Page 423 and 424:
�� 407
Page 425 and 426:
Appendix C: DSR Remote Operations S
Page 427 and 428:
Page 429 and 430:
��
Page 431 and 432:
Number Description 1 Menu bar: Allo
Page 433 and 434:
Managing servers To connect to a se
Page 435 and 436:
Appendix D: Terminal Emulation �
Page 437 and 438:
VT102 Receive Code Insert Line (IL)
Page 439 and 440:
��
Page 441 and 442:
Control Sequence Definition Encode/
Page 443 and 444:
Control Sequence Definition Encode/
Page 445 and 446:
VT220 Keyboard PC Keyboard F16 Ctrl
Page 447 and 448:
VT220 Keyboard Function VT220 Keybo
Page 449 and 450:
Keys Keypad Numeric Code VT52 Keypa
Page 451 and 452:
VT320 Keyboard Function VT320 Keybo
Page 453 and 454:
��
Page 455 and 456:
��
Page 457 and 458:
��
Page 459 and 460:
��
Page 461 and 462:
IQ module ��
Page 463 and 464:
��
Page 465 and 466:
��
Page 467 and 468:
��
Page 469:
590-��-501A
show all

DSViewâ¢ 4 Installer/User Guide - Emerson Network Power

Create successful ePaper yourself

Delete template?

Save as template?

DSViewâ¢ 4 Installer/User Guide - Emerson Network Power