DSView™ 4 Installer/User Guide - Emerson Network Power

VT102 Receive Code
Insert Line (IL)
Delete Line (DL)
VT100 terminal emulation
Inserts n lines at the line where the cursor is currently positioned. Lines displayed
below the cursor position move down. Lines moved past the bottom margin are
lost.
Deletes n lines starting with the line where the cursor is currently positioned. As
lines are deleted, lines below the cursor position move up.
����� ��� ����� ��� ����� ������� ��� ��� ������� �Ctrl� ��� ������������ ��� ���������
������� ����������������� �������� ����� ��� � ��������� ��� �� � ��� ����������
Table D.4: VT100 Special Keys and Control Keys
Keys Hex Code Function Mnemonic Encode/Decode
Return 0D CR Yes/Yes
Linefeed 0A LF Yes/Yes
Backspace 08 BS Yes/Yes
Tab 09 HT Yes/Yes
Spacebar 20 (SP) Yes/Yes
Esc 1B Esc Yes/No
Ctrl+Spacebar 00 NUL Yes/No
Ctrl+A 01 SOH Yes/No
Ctrl+B 02 STX Yes/No
Ctrl+C 03 ETX Yes/No
Ctrl+D 04 EOT Yes/No
Ctrl+E 05 ENO Yes/No
Ctrl+F 06 ACK Yes/No
Ctrl+G 07 BELL Yes/Yes
���������� 421