Programmer V5 EN
This is a multi-channel programming system for turning / milling machines with 3D machine room simulation. ● You create NC programs on the basis of an NC editor with machine macros and an integrated 2.5D CAD / CAM system. ● Templates are stored for different types of processing (bar / chuck ...). ● Program structures are generated automatically. ● The 3D machine space simulation shows the real machining process simultaneously. ● The actual implementation of the NC program is simulated. ● In the event of a collision, the relevant machine components and the associated NC blocks are displayed. What are the extensions of the V5.1 programmer? ● Project history and additional windows for further machine conditions ● Main and subprogram names are displayed in the simulation ● 3D blank (prismatic, rotationally symmetrical) is to be read in the STL format into the simulation ● The current workpiece is to be generated from the simulation as a 3D blank in the STL format ● Gaps can be measured in three dimensions ● NC block run times can be displayed as an EXCEL table
This is a multi-channel programming system for turning / milling machines with 3D machine room simulation.
● You create NC programs on the basis of an NC editor with machine macros and an integrated 2.5D CAD / CAM system.
● Templates are stored for different types of processing (bar / chuck ...).
● Program structures are generated automatically.
● The 3D machine space simulation shows the real machining process simultaneously.
● The actual implementation of the NC program is simulated.
● In the event of a collision, the relevant machine components and the associated NC blocks are displayed.
What are the extensions of the V5.1 programmer?
● Project history and additional windows for further machine conditions
● Main and subprogram names are displayed in the simulation
● 3D blank (prismatic, rotationally symmetrical) is to be read in the STL format into the simulation
● The current workpiece is to be generated from the simulation as a 3D blank in the STL format
● Gaps can be measured in three dimensions
● NC block run times can be displayed as an EXCEL table
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3x45˚
70˚
8
R2
R2
35
M16
25
58
DIN 76 – A
A
1 2 3
4
Übung 1
Rohteil: Ø 60x78
25
SW28
A
Übung 5
1 2 3
4
Rohteil: Ø 120x104
B
A
B
A
Übung 4
Rohteil: Ø 80x78
A
B
2 3
43
30
1 4
C
B
C
76
A
B
C
C
D
B
unbemaßte Fasen = 1x45°
D
C
unbemaßte Radien = 1
D
unbemaßte Fasen = 1x45°
unbemaßte Radien = 1
E
D
C
D
unbemaßte Fasen = 1x45°
unbemaßte Radien = 1
DIN ISO 13715
-0,4
+0,4 Allgemeintoleranz ISO 2768-m
E
E
Verantwortl. Abt. Technische Referenz Erstellt durch Genehmigt von
F
DMG-TA
DMG-TA
DIN ISO 13715
Dokumentenart
Fertigungszeichnung
Titel, zusätzlicher Titel Material
DMG-TA
E
Verantwortl. Abt. Technische Referenz Erstellt durch Genehmigt von
Dokumentenstatus
freigegeben
D
E
F
DIN ISO 13715
DMG-TA
-0,4
1
+0,4 Allgemeintoleranz ISO 2768-m
Dokumentenstatus
DMG-TA
Dokumentenart
Fertigungszeichnung
freigegeben
Verantwortl. Abt. Technische Referenz Erstellt durch Genehmigt von
F
Übung 1
Änd.
EN AW-Al Cu 4 PB Mg
-0,4
Ausgabedatum
2
3
4
EN AW-Al Cu 4 PB Mg
Titel, zusätzlicher Titel Material
Änd. Ausgabedatum
Chapter
1
2
Übung 5
3
1
Spr.
de
4
Blatt
1
F
2
+0,4 Allgemeintoleranz ISO 2768-m
Spr.
de
DMG-TA
Dokumentenart
Fertigungszeichnung
Blatt
Titel, zusätzlicher Titel Material
Übung 4
3
1
F
Änd.
Dokumentenstatus
freigegeben
EN AW-Al Cu 4 PB Mg
Exercises 8
Ausgabedatum
Spr.
de
4
1
Blatt
F
E