Programmer V5 EN
This is a multi-channel programming system for turning / milling machines with 3D machine room simulation. ● You create NC programs on the basis of an NC editor with machine macros and an integrated 2.5D CAD / CAM system. ● Templates are stored for different types of processing (bar / chuck ...). ● Program structures are generated automatically. ● The 3D machine space simulation shows the real machining process simultaneously. ● The actual implementation of the NC program is simulated. ● In the event of a collision, the relevant machine components and the associated NC blocks are displayed. What are the extensions of the V5.1 programmer? ● Project history and additional windows for further machine conditions ● Main and subprogram names are displayed in the simulation ● 3D blank (prismatic, rotationally symmetrical) is to be read in the STL format into the simulation ● The current workpiece is to be generated from the simulation as a 3D blank in the STL format ● Gaps can be measured in three dimensions ● NC block run times can be displayed as an EXCEL table
This is a multi-channel programming system for turning / milling machines with 3D machine room simulation.
● You create NC programs on the basis of an NC editor with machine macros and an integrated 2.5D CAD / CAM system.
● Templates are stored for different types of processing (bar / chuck ...).
● Program structures are generated automatically.
● The 3D machine space simulation shows the real machining process simultaneously.
● The actual implementation of the NC program is simulated.
● In the event of a collision, the relevant machine components and the associated NC blocks are displayed.
What are the extensions of the V5.1 programmer?
● Project history and additional windows for further machine conditions
● Main and subprogram names are displayed in the simulation
● 3D blank (prismatic, rotationally symmetrical) is to be read in the STL format into the simulation
● The current workpiece is to be generated from the simulation as a 3D blank in the STL format
● Gaps can be measured in three dimensions
● NC block run times can be displayed as an EXCEL table
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
B
78
E
30°
F
36
32
0
1
45
57
14
25
20
M 42
32
31
40
18
R5
2
28
0
3
B
4
E
F
1 2 3
4
A
51,8
100±0,05
72,1
76,9
94,5
A
22,5°
DIN 76 - A
1,6x45°
2x45°
18 -0 ,05
- 0,01
x1,5
70 ±0,05
R 2,5
C
6± 0,05
C
6
2
D
48H7
D
167°
DIN ISO 13715
DMG-TA
36,5±0,02
+0,4 -0,4 Allgemeintoleranz ISO 2768-m
Verantwortl. Abt. Technische Referenz Erstellt durch Genehmigt von
DMG-TA
Dokumentenart
Fertigungszeichnung
Rohmaterial : Rd 80x102
Alle Kanten gebrochen
Nicht bemaßte Radien/ Fasen 1 mm
Dokumentenstatus
freigegeben
Titel, zusätzlicher Titel Material
Änd. Ausgabedatum
Übung 4
M 1:1
EN AW-Al Cu 4 PB Mg
Spr.
de
Blatt
1
1
Chapter
3D Preparation programs
Change language