Programmer V5 EN
This is a multi-channel programming system for turning / milling machines with 3D machine room simulation. ● You create NC programs on the basis of an NC editor with machine macros and an integrated 2.5D CAD / CAM system. ● Templates are stored for different types of processing (bar / chuck ...). ● Program structures are generated automatically. ● The 3D machine space simulation shows the real machining process simultaneously. ● The actual implementation of the NC program is simulated. ● In the event of a collision, the relevant machine components and the associated NC blocks are displayed. What are the extensions of the V5.1 programmer? ● Project history and additional windows for further machine conditions ● Main and subprogram names are displayed in the simulation ● 3D blank (prismatic, rotationally symmetrical) is to be read in the STL format into the simulation ● The current workpiece is to be generated from the simulation as a 3D blank in the STL format ● Gaps can be measured in three dimensions ● NC block run times can be displayed as an EXCEL table
This is a multi-channel programming system for turning / milling machines with 3D machine room simulation.
● You create NC programs on the basis of an NC editor with machine macros and an integrated 2.5D CAD / CAM system.
● Templates are stored for different types of processing (bar / chuck ...).
● Program structures are generated automatically.
● The 3D machine space simulation shows the real machining process simultaneously.
● The actual implementation of the NC program is simulated.
● In the event of a collision, the relevant machine components and the associated NC blocks are displayed.
What are the extensions of the V5.1 programmer?
● Project history and additional windows for further machine conditions
● Main and subprogram names are displayed in the simulation
● 3D blank (prismatic, rotationally symmetrical) is to be read in the STL format into the simulation
● The current workpiece is to be generated from the simulation as a 3D blank in the STL format
● Gaps can be measured in three dimensions
● NC block run times can be displayed as an EXCEL table
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4 | Machining with tailstock on the 4A TWIN machine model
Call the workpiece settings and go to the tailstock settings.
Memo
The structure that is now available must be supplemented by the standard centre sleeve
machining processes. In general, these processes are:
Channel1: - Pre-positioning of X3 and Z3
- Machining at Sp3 or Sp4.
Channel2: - Centring at Sp4
- Centre sleeve advance at Sp4
- Machining with tailstock centre at Sp4
- Centre sleeve retraction at Sp4
RG771 = workpiece-specic centre sleeve stroke
RG772 = tolerance window
RG774 = depth of penetration of centre sleeve
into the workpiece
RG771 = feed distance
5
93
Machining with tailstock on the 4A TWIN machine model
The first machining process in
channel 1 moves the X3 axis upwards
and advances the Z3 axis
to the supporting position.
Make sure RG730 and the correct
template program are called.
A-D821UK-1_200420
93