Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
42 DIGITAL FINISHING<br />
Binary solution<br />
Since the first DM-Liner was introduced<br />
in 2014, LEONHARD KURZ has<br />
continuously developed its digital<br />
finishing solutions. Based on a foundation that<br />
has been installed worldwide, KURZ's third<br />
generation of DM-JETLINER and DM-<br />
UNILINER 2D delivers tried-and-tested<br />
technology with improved design and customtailored<br />
features.<br />
From foil to paper labels: The<br />
Panorama Portfolio<br />
In addition to optimizing digital finishing unit<br />
functions, this KURZ innovation has also<br />
increased the number of potential substrates:<br />
From plastic to paper, a broad assortment is<br />
available. Thanks to this recent expansion, the<br />
lineup ranges from products like shrink sleeve<br />
labels to coated and uncoated papers<br />
Thanks to the unique ‘inkjet on transfer layer’<br />
technology, the surface to be printed remains<br />
unchanged, despite the large number of<br />
possible substrates. For customers this means,<br />
on the one hand, precision control of<br />
processes, and on the other, less time and<br />
effort, because no in-depth knowledge is<br />
required for production at consistently high<br />
quality. It has never been easier to facilitate<br />
design options and add shimmering<br />
metallization when refining your own products.<br />
DM-JETLINER: A wide range of<br />
capabilities<br />
The DM-JETLINER is ideal for companies<br />
that already produce digitally printed labels<br />
and would like to expand their design options.<br />
This digital finishing module is easily<br />
integrated into the production chain of an HP<br />
Indigo 6900, thus allowing metallization<br />
without changes to existing processes. The<br />
DM-JETLINER applies finishes inline during<br />
the preprint process, subsequently<br />
overprinting them in the same process step.<br />
DM-UNILINER 2D: The<br />
independent all-rounder<br />
The DM-UNILINER 2D also applies finishes<br />
with glossy metallization and bright color<br />
effects. This stand-alone production unit can<br />
be used independent of printing systems and<br />
processes. It is a solution that provides<br />
preprint or postprint finishing, making the<br />
DM-UNILINER 2D system suited to<br />
companies that value flexibility with a high<br />
degree of finishing automation. In particular,<br />
because order size is not decisive here,<br />
appealing decorations can be applied to<br />
smaller product runs and special editions as<br />
well.<br />
Sustainable, efficient solutions<br />
from a single source<br />
Both the DM-JETLINER and the DM-<br />
UNILINER 2D combine the advantages of<br />
digital finishing over those of classic<br />
embossing processes. They are foil-saving<br />
units with minimal set-up time and high<br />
printing speed, and are thus a sustainable<br />
finishing solution that significantly reduces<br />
energy consumption. Embossing tools are<br />
moreover no longer necessary, while waste is<br />
also held to a minimum because fewer test<br />
runs are required than with conventional<br />
methods.<br />
And there is another factor which increases<br />
process efficiency. As a one-stop shop,<br />
LEONHARD KURZ provides perfectly aligned<br />
systems, from the machine and consumables<br />
such as transfer products and ink, to service.<br />
The experts at KURZ are glad to assist<br />
customers with queries related to technology<br />
and production, both via remote support and<br />
on-site service.<br />
<strong>Finishing</strong> - <strong>September</strong>/<strong>October</strong> <strong>2021</strong>