ATH-Heinl Changer accessories ATH RB20-3 Multilingual
User Manual Changer accessories ATH RB20-3 Multilingual
User Manual Changer accessories ATH RB20-3 Multilingual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3 OPERATION<br />
3.1 Operating instructions<br />
Company:<br />
Activity:<br />
Operating instructions<br />
for tire filling equipment<br />
Dangers to people and the environment<br />
Date:<br />
Signature:<br />
■<br />
■<br />
■<br />
■<br />
Serious injuries can be caused by burst tires, flying off balancing weights or rim parts.<br />
Dust harmful to health is released by abrasion of brake linings.<br />
Do not point the filling piece at persons, animals or moving objects when unloading.<br />
Danger due to lack of maintenance of the equipment<br />
Protective measures and rules of conduct<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
■<br />
Do not blow the air onto the rim.<br />
To avoid dust formation, clean rims and tires only wet; if possible, use wheel washing equipment.<br />
Tires should not be cleaned with flammable liquids if the tire inflation bomb is subsequently used.<br />
Remove dust on brake drums with the extraction bell in conjunction with suitable industrial vacuums. For dust free of<br />
asbestos, use category U equipment and for dust containing asbestos, use category K1 equipment.<br />
Only use rims that are in perfect condition. For one-piece rims where both halves are tack welded together, check the<br />
strength of the seam.<br />
Pre-damaged tires must be rendered unusable.<br />
When inflating the tire, set up protective equipment to catch flying parts.<br />
Keep people away from the danger zone.<br />
On tire changers with vertical wheels, work with heavy tires (e.g. EM tires) must be carried out by 2 persons.<br />
For tires with a diameter > 1.4 m or a weight > 200 kg, devices must be used to prevent them from falling over.<br />
The inflation of the tire must be monitored and the maximum permissible mounting pressures must not be exceeded.<br />
■ There is a danger to other persons, therefore always keep a safety distance of min. 10 m.<br />
■<br />
The jumping of the beads into the desired position takes place at high speed, therefore it should always be ensured that:<br />
ü In the case of multi-piece rims, the screw connections are tight.<br />
ü The tires are always inflated to the specified pressure.<br />
ü A safety cage is used.<br />
ü The tires are not damaged.<br />
Behavior in case of malfunctions<br />
■<br />
Any defects found must be reported immediately to the person in charge.<br />
First aid<br />
■<br />
■<br />
■<br />
■<br />
Inform the first aider (see alarm or emergency plan)<br />
Treat injuries immediately<br />
Make an entry in the first-aid book<br />
In case of serious injuries, make an emergency call<br />
Maintenance<br />
■<br />
Repairs may only be carried out by authorized and trained personnel.<br />
32<br />
® Copyright <strong>ATH</strong>-<strong>Heinl</strong> GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved<br />
Release date: 27.04.2023 / Product manufacturer <strong>ATH</strong>-<strong>Heinl</strong> GmbH & Co. KG