SWX ”B” Series Operator's Manual - Shuttlewagon mobile railcar ...

Lubrication and Servicing
Caterpillar Fuel Filter and Fuel Water Separator
The following instructions are for Caterpillar engines 3116T and 3116TA.
Follow the instructions carefully and refer to Illustration I-IV. Remember, do
not over tighten filters and drain plugs. Refer to engine manual for more
detailed
•
specifications.
Open the drain cock (item 1) to empty the fuel filter water
•
separator (item 2). Once drained, close drain cock.
•Unscrew filter bowl (item 3) from filter (item 2).
Unscrew filter from filter head (item 4) and discard old filter and
•
O-ring (item 5).
•Clean filter head and remove any parts of the old O-ring still left.
•Replace with new filter. (hand tighten only)
Screw filter bowl back on. (hand tighten only)
Illustration I-VI. Caterpillar Fuel-Water Separator and Fuel Filter.
4
5
2
3
1