Embedded Solutions
Embedded Solutions
Embedded Solutions
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
D5 – 6U CompactPCI PowerPC SBC<br />
■ PowerPC MPC8560/800MHz<br />
■ 1-slot CompactPCI 64-bit/66MHz<br />
■ System slot, peripheral slot or stand-alone<br />
■ Hot-swap and PICMG 2.16 support<br />
■ Up to 2GB ECC DRAM<br />
■ NAND Flash, FRAM<br />
■ Graphics via PMC or FPGA<br />
■ 2 Gigabit/1 Fast Ethernet<br />
■ Parallel ATA for on-board hard disk<br />
■ Further I/O individual via FPGA<br />
■ 2 PMC slots<br />
■ MENMON BIOS for PowerPC cards<br />
Processor<br />
■ MPC8560/800MHz (1GHz optional)<br />
■ Passive heatsink<br />
■ e500 PowerPC core with FPU and MMU<br />
■ Integrated Northbridge and Southbridge<br />
■ High memory bandwidth<br />
Memory<br />
■ SO-DIMM socket for DDRAM 333<br />
■ Up to 2GB ECC DRAM<br />
■ SO-DIMM<br />
■ 32KB nonvolatile FRAM<br />
■ 2MB FPGA NOR Flash<br />
■ Up to 1GB NAND Flash<br />
(depending on chip availability)<br />
CompactPCI Bus Interface<br />
■ Universal bridge, system, peripheral<br />
or stand-alone operation<br />
■ 64-bit/66MHz 3.3V VIO<br />
PMC Slots<br />
■ Two PMC slots up to 64-bit/64MHz,<br />
3.3V VIO<br />
■ PMC I/O module (PIM) support through J4<br />
I/O<br />
■ MPC8560<br />
■ COM1 available at the front or on rear I/O<br />
■ COM2 available at the rear<br />
■ Two 1Gb Ethernet channels compatible<br />
with PICMG 2.16<br />
■ One 100Mb Ethernet channel compatible<br />
with PICMG 2.16<br />
■ Ethernet controllers are integrated in the CPU<br />
to guarantee real throughput<br />
■ FPGA<br />
■ Parallel ATA available on board for on-board<br />
hard disk extension or rear I/O<br />
■ SRAM controller<br />
■ NAND Flash controller for on-board Flash disk<br />
■ Open for additional functions like<br />
2D graphics, CAN etc.<br />
Supervisor<br />
■ Real-time clock with 256B GoldCap backup<br />
CMOS RAM<br />
■ Support of a system management interface<br />
via non-intelligent IPMI<br />
■ Flexible Watchdog timers based<br />
on the FPGA<br />
■ Detection of restart cause from memory<br />
Mechanical Specifications<br />
■ 6U, 4HP standard cPCI 6U board<br />
Compliance<br />
■ CompactPCI Core Specification<br />
PICMG 2.0 R3.0<br />
■ CompactPCI Hot Swap Specification<br />
PICMG 2.1 R2.0<br />
■ CompactPCI System Management<br />
PICMG 2.9 R1.0<br />
■ CompactPCI Packet Switching Backplane<br />
PICMG 2.16 R1.0<br />
Power Requirements<br />
(MPC8560, 1GB Memory)<br />
■ +5V (+5%, -3%), 3A typically<br />
■ +3.3V (+5%, -3%), 1Amps typically<br />
■ +12V, ±5%, only used for PMCs<br />
■ -12V, ±5%, only used for PMCs<br />
Environmental Specifications<br />
■ Temperature range (operation):<br />
■ 0..+50°C<br />
■ Airflow: min. 10m 3 /h<br />
■ Temperature range (storage): -40..+85°C<br />
■ Relative humidity (operation): max. 95% nc<br />
■ Relative humidity (storage): max. 95% nc<br />
■ Altitude: -300m to + 3,000m<br />
■ Shock: 15g/11ms<br />
■ Bump: 10g/16ms<br />
■ Vibration (sinusoidal): 2g/10..150Hz<br />
Safety<br />
■ PCB manufactured with a flammability rating<br />
of 94V-0 by UL recognized manufacturers<br />
Product available Q II / 2005<br />
EMC<br />
MEN CompactPCI<br />
■ Tested according to EN 55022 / 1999-05<br />
(radio disturbance) and EN 55024 / 1999-05<br />
(immunity) with regard to CE conformity<br />
MENMON<br />
■ New MENMON Hurricane<br />
■ Telnet server<br />
■ MENMON console over network and Flash<br />
update over network<br />
■ HTTP Server, setup/control via browser<br />
■ VGA/framebuffer devices<br />
■ Optional touch/virtual keyboard<br />
■ Boot Logo while booting<br />
■ BMP file from onboard medium (CF)<br />
■ Setup menu<br />
■ Extended diagnostics<br />
■ Program update<br />
■ Load file from disk<br />
■ From root directory of DOSFS<br />
■ From PReP partition<br />
■ Disk update<br />
Software Support<br />
■ Linux<br />
■ VxWorks<br />
■ QNX<br />
CompactPCI<br />
19