Embedded Solutions

A14 – 6U VME64 PowerPC SBC
■ PowerPC MPC8540/800MHz
■ 1-slot 64-bit VMEbus master and slave
■ Up to 2GB ECC DRAM
■ NAND Flash, FRAM
■ Graphics via PMC or FPGA
■ 2 Gigabit/1 Fast Ethernet
■ Up to 6 COMs
■ Parallel ATA for on-board hard disk
■ Further I/O individual via FPGA
■ 2 PMC slots
■ MENMON BIOS for PowerPC cards
Processor
■ MPC8540/800MHz (1GHz optional)
■ Passive heatsink
■ e500 PowerPC core with FPU and MMU
■ Integrated Northbridge and Southbridge
■ High memory bandwidth
Memory
■ SO-DIMM socket for DDRAM 333
■ Up to 2GB ECC DRAM
■ SO-DIMM
■ 32KB non-volatile FRAM
■ 2MB FPGA NOR Flash
■ Up to 1GB NAND Flash
(depending on chip availability)
VMEbus Interface
■ Slot-1 function with auto-detection
■ Master
D08(EO):D16:D32:D64:A16:A24:A32:A64;
BLT; transfer rate max. 25MB/s
■ Slave
D08(EO):D16:D32:D64:A16:A24:A32:A64;
BLT; transfer rate max. 25MB/s
■ 1MB shared fast SRAM
■ Local PCI bus accessible
■ DMA controller with scatter gather DMA
■ Mailbox functionality
■ Interrupter D08(O):I(7-1):ROAK
■ Interrupt handler D08(O):IH(7-1)
■ Requester, arbiter, bus timer
PMC Slots
■ Two PMC slots up to 64-bit/64MHz,
3.3V VIO
■ PMC I/O module (PIM) support
through P2
I/O
■ MPC8560
■ COM1 available at the front or on rear I/O
■ COM2 available at rear
■ Two 1Gb Ethernet channels compatible
■ One 100Mb Ethernet channel compatible
■ Ethernet controllers are integrated in the CPU
to guarantee real throughput
■ FPGA
■ Parallel ATA available on board for on-board
hard disk extension
■ SRAM controller
■ NAND Flash controller for on-board Flash disk
■ Open for additional functions like
2D graphics, CAN etc.
■ Option: OX16PCI954 Quad UART
■ Via serial interface (SA) adapters for flexible
configuration as RS232..TTY
Supervisor
■ Real-time clock with 256B GoldCap backup
CMOS RAM
■ Flexible Watchdog timers based
on the FPGA
■ Detection on storage of re-start reason
Compliance
■ VME64
Mechanical Specifications
■ 6U, 4HP standard VME64 6U board
Power Requirements
(MPC8560, 1GB Memory)
■ +5V (+5%, -3%), 5A typically
■ +3.3V (+5%, -3%), not used
■ +12V, ±5%, only used for PMCs
■ -12V, ±5%, only used for PMCs
Environmental Specifications
■ Temperature range (operation):
■ 0..+50°C
■ Airflow: min. 10m 3 /h
■ Temperature range (storage): -40..+85°C
■ Relative humidity (operation):
max. 95% non-condensing
■ Relative humidity (storage):
max. 95% non-condensing
■ Altitude: -300m to + 3,000m
■ Shock: 15g/11ms
■ Bump: 10g/16ms
■ Vibration (sinusoidal): 2g/10..150Hz
Product available Q II / 2005
Safety
MEN VMEbus
■ PCB manufactured with a flammability rating
of 94V-0 by UL recognized manufacturers
EMC
■ Tested according to EN 55022 / 1999-05
(radio disturbance) and EN 55024 / 1999-05
(immunity) with regard to CE conformity
MENMON
■ New MENMON Hurricane
■ Telnet server
■ MENMON console via network and Flash
update via network
■ HTTP Server, setup/control via browser
■ VGA/framebuffer devices
■ Optional touch/virtual keyboard
■ Boot logo while booting
■ BMP file from on-board medium (CF)
■ Set-up menu
■ Extended Diagnostics
■ Program update
■ Load file from disk
■ From root directory of DOSFS
■ From PReP partition
■ Disk update
Software Support
■ Linux
■ VxWorks
■ QNX
VMEbus
37