Embedded Solutions
Embedded Solutions
Embedded Solutions
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
System-on-Module ESM MEN<br />
60<br />
System-on-Module ESM<br />
EM01 – ESM with PowerPC MPC5200<br />
<strong>Embedded</strong> System Module with:<br />
■ MPC5200 / 384 MHz<br />
■ Up to 256MB onboard DDR SDRAM<br />
■ NAND Flash<br />
■ Up to 2MB NVRAM<br />
■ Up to 16MB graphics memory<br />
■ Dual Fast Ethernet, COM, USB (front)<br />
■ Dual CAN controller<br />
■ Further COMs, graphics, IDE etc. optional via FPGA<br />
■ Stackable with PCI-104<br />
■ MENMON BIOS for PowerPC cards<br />
CPU<br />
■ PowerPC MPC5200 up to 400MHz<br />
Memory<br />
■ Level 1 Cache integrated in MPC5200<br />
■ Onboard DDR SDRAM up to 256MB<br />
■ 64MHz memory bus operation<br />
■ Flash up to 8MB, 8-bit data bus<br />
■ 2MB battery-backed SRAM<br />
■ Non-volatile memory<br />
■ 8-bit data bus<br />
■ Serial EEPROM 16kbit for factory settings<br />
■ Up to 1GB NAND Flash<br />
■ Up to 16MB SDRAM, connected to FPGA,<br />
e.g. for video data Interfaces<br />
■ Two 10/100Mbits/s Ethernet interfaces<br />
■ One controlled by MPC5200 internal controller<br />
■ One controlled by FPGA<br />
■ Accessible at front panel on two RJ45<br />
or one D-Sub connector<br />
■ One UART RS232 serial interface (COM1)<br />
■ Accessible at front panel on RJ45<br />
or D-Sub connector<br />
■ USB 1.1<br />
■ Accessible at front panel on standard Type A<br />
connector<br />
■ Dual CAN controller<br />
■ MPC5200 internal controller<br />
■ Accessible via onboard connectors<br />
Additional I/O through FPGA<br />
■ Available at I/O connector<br />
■ Depending on FPGA composition<br />
■ IDE port<br />
■ Further UARTs<br />
■ Floppy disk interface<br />
■ Display control<br />
■ Touch panel control<br />
■ Other/further I/O options on request<br />
PCI Interface<br />
■ 32-bit PCI interface at PCI-104 connector J1<br />
■ Support of 4 external masters<br />
Miscellaneous<br />
■ Real-time clock<br />
■ Power supervision and watchdog<br />
Electrical Specifications<br />
■ Supply voltage/power consumption:<br />
■ +5V (4.85V..5.25V), tbd.<br />
■ +3.3V (3.0V..3.6V), tbd.<br />
■ MTBF: tbd. @ 50°C<br />
Mechanical Specifications<br />
■ Dimensions: conforming to ESM specification<br />
(PCB: 149mm x 71mm)<br />
■ Weight: tbd.<br />
Environmental Specifications<br />
■ Temperature range (operation):<br />
■ -40..+85°C<br />
■ Airflow: min. 10m 3 /h<br />
■ Temperature range (storage): -40..+85°C<br />
■ Relative humidity (operation): max. 95% nc<br />
■ Relative humidity (storage): max. 95% nc<br />
■ Altitude: -300m to + 3,000m<br />
■ Shock: 15g/11ms<br />
■ Bump: 10g/16ms<br />
■ Vibration (sinusoidal): 2g/10..150Hz<br />
Software Support<br />
■ VxWorks<br />
■ Linux (ELinOS)<br />
■ MENMON<br />
EM01A – I/O on J3<br />
ESM with MPC5200<br />
EM01A offers 2 Fast Ethernet, COM and USB<br />
via J3 rear I/O connector instead of 2 Fast<br />
Ethernet, COM and USB via RJ45 on front<br />
(EM01).