Embedded Solutions
Embedded Solutions
Embedded Solutions
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
F8 – 3U CompactPCI Infotainment SBC<br />
■ 32-bit cPCI system slot or stand-alone, 12 HP<br />
■ Transmeta TM5900 / 800 MHz<br />
■ 512 MB DDR RAM (SO-DIMM) installed<br />
■ CompactFlash slot<br />
■ 2.5" hard disk slot<br />
■ Dual Fast Ethernet, COM 1, USB1.1 (front)<br />
■ DVI and DVI-I (front)<br />
■ LCD (up to UXGA) and CRT<br />
■ 16 MB integrated graphics RAM<br />
■ Up to 1600 x 1200 pixels<br />
■ AC'97 (opt. isolation), keyboard/mouse, CAN,<br />
COMs... optional via FPGA with SA-Adapters<br />
■ Option: up to 8 SA-Adapters<br />
CompactPCI Bus<br />
■ 3U CompactPCI CPU board PICMG<br />
Spec. 2.0 R3.0 compliant<br />
■ 32-bit CompactPCI system slot functionality<br />
with 7 possible external loads<br />
■ PCI-to-PCI bridge<br />
■ Double-slot solution (plus 1 mechanical slot<br />
for hard disk)<br />
■ V(I/O): +3.3V or +5V (Universal Board)<br />
■ Also available as busless version (with ext. 5V)<br />
CPU<br />
■ Transmeta Crusoe TM5900 Microprocessor<br />
with integrated Northbridge<br />
■ 800MHz<br />
Graphics<br />
■ SM731 controller<br />
■ DVI and DVI-I connectors at front panel<br />
■ 235-MHz, 24-bit RAMDAC<br />
■ Maximum resolution: 1600 x 1200 pixels<br />
■ DualMon support<br />
Memory<br />
■ 64KB L1 and 512KB L2 Cache integrated<br />
in Crusoe CPU<br />
■ Up to 1GB SO-DIMM DDR RAM<br />
(512MB installed)<br />
■ 133MHz memory bus operation<br />
■ 64-bit data bus, 2.5V<br />
■ Flash 4MB<br />
■ 8-bit data bus, 3.3V<br />
■ Hardware data protection<br />
■ Serial EEPROM 4kbit for factory settings<br />
■ CompactFlash (TM) card interface for Flash<br />
ATA (true IDE) via on-board IDE<br />
■ Up to 8MB SDRAM, connected to FPGA,<br />
e.g. for video data<br />
■ 16MB embedded SGRAM in SM731 graphics<br />
controller<br />
Interfaces<br />
■ Two 10/100Mbits/s Ethernet channels<br />
■ GD82551ER internal controllers<br />
■ Two RJ45 connectors at front panel<br />
■ UART RS232 serial interface COM1<br />
■ One 9-pin D-Sub connector at front panel<br />
■ Up to 230 kbaud<br />
■ USB 1.1<br />
■ Type A at front panel<br />
■ Option: second interface via onboard<br />
connector<br />
■ Option: Up to 8 SA-Adapters<br />
■ Mostly implemented in onboard FPGA<br />
■ RS232, RS422/485, binary I/O,<br />
keyboard/mouse, AC'97 audio, CAN...<br />
Mass Storage<br />
■ Fast IDE ports (UDMA5)<br />
■ One IDE port for local CompactFlash<br />
■ One IDE hard-disk/CD-ROM port via 44-pin<br />
ribbon cable connector Ultra DMA100<br />
PCI Interface<br />
■ 32-bit PCI interface at PCI-104 connector J1<br />
■ Support of 2 external masters<br />
Software Support<br />
■ Award BIOS, Linux, Windows<br />
■ CANopen support: MEN Driver Interface<br />
System (MDIS for Windows, Linux, VxWorks,<br />
QNX, RTX, OS-9)<br />
■ MSCAN/Layer2 support:<br />
MEN Driver Interface System (MDIS for<br />
Windows, Linux, VxWorks, QNX, RTX, OS-9)<br />
MEN CompactPCI<br />
Product Options<br />
SA-Adapters<br />
■ Up to 8 SA-Adapters<br />
■ Mostly implemented in onboard FPGA<br />
■ RS232, RS422/485, binary I/O, AC'97, CAN...<br />
■ Example config.: 2 CAN (SA08), 2 RS485<br />
(SA02), 1 RS232 (SA03), 1 digital I/O (5 O, 5 I,<br />
3 I/O – SA15), 1 AC'97 w. opt. isolation (SA12)<br />
Front Connections<br />
■ Ethernet with D-Sub instead of RJ45<br />
■ COM1 with RJ45 instead of D-Sub<br />
■ COM2 also available at front<br />
USB 1.1<br />
■ Second interface via onboard connector<br />
Busless Also available with ext. 5V<br />
CompactPCI<br />
9
Change language