AMIAD Automatic Filters “SAF-6000”

TECHNICAL SPECIFICATIONS
General
Maximum flow rate 400 m 3 /h 1760 USgpm
3
Consult manufacturer for optimum flow
depending on filtration degree & water quality.
Min. working pressure 2.0 bar 30 psi or lower if pressure is increased for flushing
Max. working pressure 10 bar 150 psi 16 bar = 240 psi upon request
Filter area 6000 cm 2 930 in 2
Inlet/Outlet diameter 150, 200, 250 mm Flange standards as per request.
Filter housing 350 mm 14" Epoxy-coated steel, or other on request.
Max. working temperature 80 0 C 176 0 F
Weight 150 mm = 240 Kg 6" = 528 lb.
Flushing Data
200 mm = 245 Kg 8" = 340 lb.
250 mm = 260 Kg 10" = 572 lb.
Exhaust valve 50 mm 2"
Flushing cycle time 40 seconds 40 seconds
Wasted water per cycle 280 liter 74 gallon at 2 bar = 30 psi
Minimum flow for flushing 25 m 3 /h 110 USgpm at 2 bar = 30 psi
Control and Electricity
Control voltage 24V AC (12V or 24V DC upon request)
Electric motor 1/3 HP 50 / 60 Hz, 25 / 30 Gear output R.P.M.
Rated operation Voltage 3 phase
Single phase
DC
220 / 380 / 440 V, 50 / 60 Hz
110 / 220 V, 50 / 60 Hz
12V or 24V (upon request)
Current consumption 0.8 Amp. (with 3 phase 380 / 440 V)
Construction Materials
Filter Housing and Lid Epoxy-coated carbon steel 37-2 (Stainless Steel 316 available on request).
Screens Stainless Steel 316
Cleaning mechanism Stainless Steel 316, POM
Exhaust valve Epoxy-coated cast iron, Natural Rubber
Seals Synthetic Rubber, Teflon
Control Aluminum, Brass, Stainless Steel, PVC
Standard Filtration Degrees
Stainless Steel Weavewire Screen
micron 500 300 200 130 100 80 50 25 10
mm 0.5 0.3 0.2 0.13 0.1 0.08 0.05 0.02 0.01
mesh 30 50 75 120 155 200 300 450 600
amiad filtration systems