hdd & dvd / video cassette recorder rdxv60kb owner's ... - UK - Toshiba

E3TK6BD_EN.book Page 75 Wednesday, February 17, 2010 10:18 AM
One-touch Timer Recording:
Press [REC I] repeatedly until the desired
recording time (30 minutes to 8 hours) appears
on the TV screen.
One-touch Timer Recording will start.
0:30
When the unit reaches the specified time, it will be turned off
automatically.
To change the recording length during One-touch Timer
Recording, press [REC I] repeatedly until desired length
appears.
To cancel One-touch Timer Recording within the specified
time, press [STOP C].
Note
Normal Recording
8:00 7:30
Only PAL recording is available for VCR.
The remaining recording time will appear on the TV screen
during One-touch Timer Recording. Press [DISPLAY] to see
it on the TV screen.
If VCR One-touch Timer Recording is completed during
HDD/DVD playback or recording, the VCR will be in stop
mode and the HDD/DVD keeps the current mode.
You cannot use the pause function during One-touch Timer
Recording.
When One-touch Timer Recording is finished and the power
is turned off, the unit will switch to the timer-standby mode
automatically if a timer recording has been programmed.
5 Press [STOP C] when the recording is
completed.
Prevent accidental erasure
To prevent accidental recording on a recorded cassette,
remove its record tab. To record on it later, cover the hole with
cellophane tape.
Record tab
1:00
DVC to VCR Dubbing
This function helps you to dub the contents in the DVC (digital
video camcorder) to VCR.
Insert a recordable videotape.
Make sure your DVC is in video mode.
1 Press [INPUT SELECT F] repeatedly to select
the external input channel, then press
[PROG. G\H] repeatedly to select DV(AV3).
2 Select the recording mode using [REC MODE].
(See page 74.)
3 Stop or pause the DVC where you want to start
dubbing.
4 Play back the DVC.
5 Press [REC I].
The dubbing will start.
Note
VCR
VCR
Preparing for DV dubbing (DVC to VCR):
Dubbing will start from where the tape is stopped.
Search
Index Search
VCR
VCR
1 Press [SEARCH] so that the index search menu
appears.
2 Enter the number of recordings you want to
skip using [the Number buttons] within 30
seconds.
3 Press [FWD D] or [REV E] to start index
search.
If you want to go in the forward direction, press
[FWD D].
If you want to go in the reverse direction, press [REV E].
After index search, the VCR will play back the tape
automatically.
Note
This function is not available during recording.
Every time a tape is recorded, an index mark is written on
the tape.
You can make the index mark up to 20.
EN
75
Introduction Connections
Basic Setup /
Recording Playback Editing Function Setup VCR Functions Others
TV View Operation