SINUMERIK 840D sl CNC Software with ShopMill 1.5 SP3 - Support ...
SINUMERIK 840D sl CNC Software with ShopMill 1.5 SP3 - Support ...
SINUMERIK 840D sl CNC Software with ShopMill 1.5 SP3 - Support ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>SINUMERIK</strong> <strong>840D</strong> <strong>sl</strong> 2010-07-01<br />
<strong>CNC</strong> <strong>Software</strong> <strong>ShopMill</strong> <strong>1.5</strong> <strong>SP3</strong><br />
the .leases file is then distributed to all other NCUs / PCUs.<br />
Important: The System Network Center, tab OPs allows to directly edit on each PCU 50 the config.ini<br />
files of all operator stations on the master NCU. The data are automatically distributed to all NCUs /<br />
PCUs each time they are changed.<br />
9. Information about technology cycles:<br />
<strong>CNC</strong> software <strong>1.5</strong> <strong>SP3</strong> includes the technology cycles (standard cycles) 07.05.09 in an installable form.<br />
Functionality:<br />
This cycle release includes new functions, improved functionality and debugs. Only the differences <strong>with</strong><br />
respect to SW 07.05.04.00 are described in this document.<br />
New functions / expanded functionality / function improvements from SW 07.05.08.00 onwards:<br />
2. Changing the cutting cycle (CYCLE95)<br />
When only finishing, the contour is now always machined in the programmed direction - just the same as<br />
it is documented. For complete machining the contour is finished exactly the same as it is also roughed;<br />
this means that one and the same tool can be used for roughing and finishing.<br />
Documentation<br />
The current documentation for this SW release is as follows:<br />
“Cycles Programming Manual” Edition 01.2008<br />
Order No. [MLFB] 6FC5398-3BP20-1AA0<br />
Compatibility Prerequisites:<br />
<strong>Software</strong> HMI:<br />
HMI-Advanced<br />
from SW 7.5<br />
<strong>Software</strong> NCU:<br />
<strong>Software</strong> <strong>840D</strong> <strong>sl</strong> NCU 7x0.x 1<br />
from SW <strong>1.5</strong><br />
<strong>with</strong> HMI-Embedded<br />
from SW 7.5<br />
<strong>with</strong> <strong>ShopMill</strong>-HMI<br />
from SW 7.5<br />
<strong>with</strong> ShopTurn-HMI<br />
from SW 7.5<br />
For applications involving angled tools <strong>with</strong> swivel cycle (CYCLE800):<br />
<strong>Software</strong> <strong>840D</strong> <strong>sl</strong> NCU 7x0.x: SW <strong>1.5</strong> <strong>with</strong> NCK from 72.06.00<br />
For using "Advanced Surface" (CYCLE832):<br />
<strong>Software</strong> <strong>840D</strong> <strong>sl</strong> NCU 7x0.x: SW <strong>1.5</strong> <strong>with</strong> NCK from 75.01.00<br />
onwards<br />
<strong>Software</strong> NCU:<br />
<strong>Software</strong> <strong>840D</strong>i <strong>sl</strong> NCU<br />
from SW <strong>1.5</strong><br />
<strong>with</strong> HMI-Advanced<br />
<strong>with</strong> <strong>ShopMill</strong>-HMI<br />
<strong>with</strong> ShopTurn-HMI<br />
from SW 7.5<br />
from SW 7.5<br />
from SW 7.5<br />
<strong>Support</strong> of option "Advanced Surface" (CYCLE832):<br />
1<br />
For applications <strong>with</strong> SW from 2.5, please note Attachment_3!<br />
© Siemens AG 2010<br />
All rights reserved<br />
I DT MC R&D 51 Page 22 of 44