SINUMERIK 840D sl CNC Software with ShopMill 1.5 SP3 - Support ...

SINUMERIK 840D sl 2010-07-01
CNC Software ShopMill 1.5 SP3
(1) with HMI-Advanced 7.5:
- read-in the archive under "Archive" / "Cycles archive" / "Measuring cycles"
- re-activate the data blocks GUD5 and GUD6 under "Definitions" (if required, also GUD7, if
measuring in JOG is used)
- activate the softkeys for measuring cycle support and measuring in JOG in the com files
aeditor.com, startup.com and ma_jog.com
- the user interface must be activated to use the CYCLE996 cycle;
(2) with NCU 840D sl: refer to Attachment_1
Errors that have been
resolved (debugs):
Debugs up to SW 07.05.01.00:
ARTS+
(RQ-id)
AP00447608
The following errors (bugs) have been resolved and in so doing, the following
files modified:
File
CYCLE982
AP00503444 Measuring
cycle support
AP00504071 Measuring in
JOG
AP00507301 CYCLE982
measurement
result
screen
AP00514963 CYCLE979
AP00531680 CYCLE109
Measuring in
JOG
Debugs up to SW 07.05.03.00:
AP00447541
AP00577260
CYCLE997
Measuring
cycle support
AP00591948 Measuring
cycle support
AP00592986 CYCLE996
AP00603309 CYCLE978
AP00606093 Measuring
AP00626470
AP00626486
cycle support
CYCLE978
CYCLE998
AP00629687 CYCLE996
AP00835584 CYCLE115
CYCLE961
AP00565321 CYCLE996
AP00612233 CYCLE996
AP00662737 Measuring in
JOG
© Siemens AG 2010 I DT MC R&D 51 Page 32 of 44
All rights reserved