CAMLOG Vario SR Prosthetic Components

VARIO SR
PROSTHETIC COMPONENTS FOR
OCCLUSALLY SCREW-RETAINED
RESTORATIONS
FOR EVEN MORE OPTIONS WITH THE
CAMLOG ® IMPLANT SYSTEM
Occlusally screw-retained crown, bridge and bar constructions
Bridging large implant axis divergences
Widening the application range of the CAMLOG ® Implant System
Aligning tool for implant alignment control
a perfect fit

Vario SR Prosthetics
ALL ADVANTAGES
AT A GLANCE
SIMPLY WELL THOUGHT OUT
• Precision and rotational stability due to the patented Tube-in-Tube
implant abutment connection
• Sterile packaged and color-coded CAMLOG ® Vario SR abutments
• Proven CAMLOG handling
SIMPLY MORE OPTIONS
• For occlusally screw-retained crown, bridge and bar restorations on
CAMLOG ® implants
• For bridging large implant axis divergences
• Where bone supply is reduced and anatomical structures are unfavorable
for implantation
SIMPLY WELL THOUGHT OUT
The patented and proven Tube-in-Tube construction ensures a precise,
mechanically sturdy and rotationally stable connection between CAMLOG ®
implant and CAMLOG ® abutment.
Handling of the CAMLOG ® Vario SR abutments is practical and logical – like
everything from CAMLOG. The CAMLOG ® Vario SR abutments come colorcoded
and sterile packed. When immediately inserted into the implant, sterilization
of the abutment as recommended is not required.
On straight abutments, the antirotational mechanism for crown restorations
is ensured by three surfaces, on angled abutments, by one surface.
CAMLOG ® Vario SR abutments: straight, 20° and 30° angled
The detailed dimensions of the CAMLOG ® Vario SR abutments and more informations are
available from the working instruction “Occlusally screw-retained restorations with Vario SR
prosthetic components on CAMLOG ® Vario SR abutments”, Art. No. J8000.0124.
SIMPLY PRACTICAL
• Impression-taking possible over the CAMLOG ® Vario SR abutment
shoulder or CAMLOG ® implant shoulder
• Specific Vario SR components available for impression-taking and cast
fabrication
• Specific Vario SR protection and titanium caps available for temporary
restorations
• Standardized fabrication of the prosthetic restoration thanks to
prefabricated components
SIMPLY PROVEN
• Choice between cement-retained or occlusally screw-retained crown and
bridge constructions for the CAMLOG ® Implant System
• Aligning tool for checking the respective prosthetic insertion direction
and alignment of the implant grooves

SIMPLY MORE OPTIONS
The new Vario SR prosthetic components extend the application possibilities
of the CAMLOG ® Implant System in prosthetic restorations.
OCCLUSALLY SCREW-RETAINED RESTORATION
With the new Vario SR prosthetic components, you now have the option of
fabricating occlusally screw-retained crown and bridge restorations with
the CAMLOG ® Implant System. Bar structures are also possible.
CAMLOG ® VARIO SR ABUTMENT OVERVIEW
Straight, 20° and 30°
angled abutments
Abutment screws
Straight CAMLOG ®
Vario SR abutments,
Ø 3.8/4.3 mm
CAMLOG ® Vario SR
abutment screw
M 1.6
Angled CAMLOG ®
Vario SR abutments,
Ø 3.8/4.3 mm
CAMLOG ®
abutment screw
M 1.6
CAMLOG ® Vario SR abutments are available in straight and angled versions for implant
diameters 3.8/4.3/5.0/6.0 mm. Straight CAMLOG ® Vario SR abutments are fixed in
the implant using the CAMLOG ® Vario SR abutment screw.
ANATOMICALLY CHALLENGING AREAS
20° and 30° angled Vario SR abutments are available for bridging large
implant axis divergences. Where bone supply is reduced and anatomical
structures are unfavorable for implantation, the implants can be placed
in the distal direction and an appropriate prosthetic restoration can be
created. Optimum use of the bone supply is thus ensured.
Straight CAMLOG ®
Vario SR abutments,
Ø 5.0/6.0 mm
CAMLOG ® Vario SR
abutment screw
M 2.0
Angled CAMLOG ®
Vario SR abutments,
Ø 5.0/6.0 mm
CAMLOG ®
abutment screw
M 2.0

SIMPLY PRACTICAL
INDIVIDUAL IMPRESSION-TAKING OPTIONS
For bridge and bar constructions, the impression can be taken using
Vario SR impression caps, open or closed tray, directly over the CAMLOG ®
Vario SR abutment already in its final position in the implant. If space is
limited, you can shorten the retention screw of the impression cap, open
tray, by 3 mm extra-orally. For crown restorations, the impression can be
taken directly over the CAMLOG ® implant shoulder using CAMLOG ®
impression posts, open or closed tray.
VARIO SR IMPRESSION-TAKING, CAST FABRICATION, FABRICATION OF THE SUPERSTRUCTURE
Impression-taking for bridge
and bar constructions
Cast fabrication for bridge and bar
constructions
Prosthetic screw
Fabrication of the
superstructure
SCREWDRIVER
Screwdriver, hex, extra short, short, long
Vario SR impression caps, open tray,
Ø 3.8/4.3 and 5.0/6.0 mm
Vario SR plastic copings
crown/bridge,
Ø 3.8/4.3 and 5.0/6.0 mm
PREFABRICATED PROSTHETIC COMPONENTS
The Vario SR components enable easy, standardized fabrication of prosthetic
restorations. Burn-out plastic copings can be used to fabricate cast
crown and bridge constructions. The titanium caps have a retention surface
on the outside and are designed for temporary or final bridge constructions
made out of plastic. For laser-welded bar constructions, titanium bases for
bars are available.
Vario SR analogs,
Ø 3.8/4.3 and 5.0/6.0 mm
Vario SR prosthetic screw for all
Vario SR caps and diameters
Vario SR titanium caps
bridge,
Ø 3.8/4.3 and 5.0/6.0 mm
Important note: The special design of the CAMLOG ® Vario SR abutment screw and
the CAMLOG ® Vario SR lab screw for the CAMLOG ® Vario SR abutment straight,
requires the exclusive use of the screwdriver, hex, Art. No. J5316.0501/0502/0503/0504/0510!
Vario SR impression caps, closed tray,
Ø 3.8/4.3 and 5.0/6.0 mm
Vario SR bases for bars,
Ø 3.8/4.3 and 5.0/6.0 mm

Vario SR Prosthetics
SIMPLY PERFECTED
NEW PROSTHETIC SCREW CONNECTION FOR
STRAIGHT CAMLOG ® VARIO SR ABUTMENTS
Straight CAMLOG ® Vario SR abutments are fixed in the implant using the
CAMLOG ® Vario SR abutment screw. The Vario SR caps are secured
using the Vario SR prosthetic screw when inserting the superstructure.
The prosthetic screw engages in the thread in the head of the CAMLOG ®
Vario SR abutment screw and fixes the cap to the abutment.
CAMLOG ® Vario SR abutment,
straight
NEW 20° AND 30° ALIGNING TOOLS FOR BETTER HANDLING
AND MORE TIME SAVINGS
If you are placing several implants, the Vario SR 20° and 30° aligning tools
can be used to check the respective insertion direction and alignment of the
implant grooves before inserting the CAMLOG ® Vario SR abutments.
Just put the respective aligning tool over the insertion post attached to the
CAMLOG ® implant. If necessary, you can slightly adjust the alignment of
the grooves of the inner implant configuration.
The angulation of the Vario SR aligning tools is identical to the 20° and 30°
angled CAMLOG ® Vario SR abutments.
Angled CAMLOG ® Vario SR abutment 20° and
Vario SR aligning tool
Vario SR
plastic coping
Vario SR
prosthetic screw
CAMLOG ® Vario SR
abutment
CAMLOG ® Vario SR
abutment screw
Insertion post
Implant
2 chamfer = 20° 3 chamfer = 30°
Angled CAMLOG ® Vario SR abutment 30° and
Vario SR aligning tool
Vario SR aligning tool
The angulation points in the opposite direction
of the CAMLOG ® implant groove.

HEADQUARTERS
CAMLOG Biotechnologies AG | Margarethenstrasse 38 | CH-4053 Basel
info@camlog.com | www.camlog.com
Manufacturer of CAMLOG ® products: ALTATEC GmbH, Maybachstraße 5, D-71299 Wimsheim
Subject to change X.J5867.09/2010