CAMLOG Vario SR Prosthetic Components
CAMLOG Vario SR Prosthetic Components
CAMLOG Vario SR Prosthetic Components
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SIMPLY PRACTICAL<br />
INDIVIDUAL IMPRESSION-TAKING OPTIONS<br />
For bridge and bar constructions, the impression can be taken using<br />
<strong>Vario</strong> <strong>SR</strong> impression caps, open or closed tray, directly over the <strong>CAMLOG</strong> ®<br />
<strong>Vario</strong> <strong>SR</strong> abutment already in its final position in the implant. If space is<br />
limited, you can shorten the retention screw of the impression cap, open<br />
tray, by 3 mm extra-orally. For crown restorations, the impression can be<br />
taken directly over the <strong>CAMLOG</strong> ® implant shoulder using <strong>CAMLOG</strong> ®<br />
impression posts, open or closed tray.<br />
VARIO <strong>SR</strong> IMPRESSION-TAKING, CAST FABRICATION, FABRICATION OF THE SUPERSTRUCTURE<br />
Impression-taking for bridge<br />
and bar constructions<br />
Cast fabrication for bridge and bar<br />
constructions<br />
<strong>Prosthetic</strong> screw<br />
Fabrication of the<br />
superstructure<br />
SCREWDRIVER<br />
Screwdriver, hex, extra short, short, long<br />
<strong>Vario</strong> <strong>SR</strong> impression caps, open tray,<br />
Ø 3.8/4.3 and 5.0/6.0 mm<br />
<strong>Vario</strong> <strong>SR</strong> plastic copings<br />
crown/bridge,<br />
Ø 3.8/4.3 and 5.0/6.0 mm<br />
PREFABRICATED PROSTHETIC COMPONENTS<br />
The <strong>Vario</strong> <strong>SR</strong> components enable easy, standardized fabrication of prosthetic<br />
restorations. Burn-out plastic copings can be used to fabricate cast<br />
crown and bridge constructions. The titanium caps have a retention surface<br />
on the outside and are designed for temporary or final bridge constructions<br />
made out of plastic. For laser-welded bar constructions, titanium bases for<br />
bars are available.<br />
<strong>Vario</strong> <strong>SR</strong> analogs,<br />
Ø 3.8/4.3 and 5.0/6.0 mm<br />
<strong>Vario</strong> <strong>SR</strong> prosthetic screw for all<br />
<strong>Vario</strong> <strong>SR</strong> caps and diameters<br />
<strong>Vario</strong> <strong>SR</strong> titanium caps<br />
bridge,<br />
Ø 3.8/4.3 and 5.0/6.0 mm<br />
Important note: The special design of the <strong>CAMLOG</strong> ® <strong>Vario</strong> <strong>SR</strong> abutment screw and<br />
the <strong>CAMLOG</strong> ® <strong>Vario</strong> <strong>SR</strong> lab screw for the <strong>CAMLOG</strong> ® <strong>Vario</strong> <strong>SR</strong> abutment straight,<br />
requires the exclusive use of the screwdriver, hex, Art. No. J5316.0501/0502/0503/0504/0510!<br />
<strong>Vario</strong> <strong>SR</strong> impression caps, closed tray,<br />
Ø 3.8/4.3 and 5.0/6.0 mm<br />
<strong>Vario</strong> <strong>SR</strong> bases for bars,<br />
Ø 3.8/4.3 and 5.0/6.0 mm
Change language