Instruction Manual - Topcon SL-D2 - Cal Coast Ophthalmic ...

More documents

Recommendations

Info

ASSEMBLY PROCEDURE SECURING THE INSTRUMENT TYPE TABLE TOP SECURING TO AUTOMATIC INSTRUMENT TABLE AIT-20/AIT-15 1 2 CAUTION Remove the cover of the instrument table. Remove 3 screws of the cover (AIT-20 only: For details, refer to the instruction manual of AIT-20.) Put the table top on the instrument table, and secure with the 4 bolts attached to the instrument table. To reverse the direction of the instrument table, remove the power supply from the bottom face of the table top and secure to the opposite side. 14 ASSEMBLY PROCEDURE To prevent falling during use and movement, secure each unit. Connect the power cable to the table outlet and power supply of the instrument table. Place the excess of the cable inside the cover, and secure the cover.
SECURING THE UNIT TYPE TABLE TOP 1 2 Remove the plastic washer from the unit type table top, which is taped to the shaft assembly. Insert the plastic washer, together with the shaft, into the cavity for the ophthalmic unit arm. SECURING THE PATIENT GRIP PG-1 (OPTIONAL ACCESSORY) 1 2 In t he unit type table top, the power supply is fitted so as to attach the ophthalmic unit on the right hand side. When attaching the ophthalmic unit on the left hand side, remove the power supply and move and attach to the right hand side (with 4 screws). Align the patient grip to the groove in the back of the chinrest base unit. Surely screw the patient grip. Chinrest base plate Washer Patient grip Grip 15 ASSEMBLY PROCEDURE
Page 1: INSTRUCTION MANUAL SLIT LAMP SL-D2
Page 4 and 5: MAINTENANCE AND CHECKS 1. Regularly
Page 7 and 8: CAUTION Icons Prevention item This
Page 9: WARNING INDICATIONS AND POSITIONS T
Page 12 and 13: CONFIGURATION NAMES OF MAIN BODY CO
Page 14: Spare chinrest tissue pin (2) Clean
Page 19 and 20: SECURING THE BINOCULAR TUBES 1 Alig
Page 21 and 22: CONNECTING AND SETTLING CABLES 1 Co
Page 23 and 24: SO-TM3 1 Align the locating pins of
Page 25 and 26: 2 Insert the auxiliary spring unit
Page 27 and 28: 9 While holding the prism box, look
Page 29 and 30: OPERATION PROCEDURES FIXING THE PAT
Page 31 and 32: 4 To fix the base, fasten the base
Page 33 and 34: SWINGING THE SLIT SIDEWAYS Turn the
Page 35 and 36: SPECIFICATIONS AND PERFORMANCE SPEC
Page 37 and 38: SYSTEM CONFIGURATION SL-D2/SL-D4/SL
Page 39 and 40: MAINTENANCE AND CHECKUPS PERIODIC M
Page 41 and 42: 4 Pull off the socket plug. 5 Pull
Page 44 and 45: CLEANING THE SLIDING PLATE, RAIL AN
Page 46 and 47: CONNECTABLE CAMERA Recommendation F
Page 48 and 49: TV ATTACHMENT TL-57 • Used to con
Page 50 and 51: PARALLEL BINOCULAR TUBE PB-2 FEATUR

Instruction Manual - Topcon SL-D2 - Cal Coast Ophthalmic ...

Create successful ePaper yourself

Delete template?

Save as template?