Instruction Manual - Topcon SL-D2 - Cal Coast Ophthalmic ...
Instruction Manual - Topcon SL-D2 - Cal Coast Ophthalmic ...
Instruction Manual - Topcon SL-D2 - Cal Coast Ophthalmic ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
FITTING THE CAP<br />
1 Fit the cap to the shaft aligning the guide rod with the groove in the cap.<br />
SECURING THE TONOMETER MOUNT (OPTIONAL ACCESSORY)<br />
Depending on specification, SO-TM1 and SO-TM2 may be included in standard accessories.<br />
SO-TM1<br />
1 Align the locating pins of SO-TM1 into the holes of the <strong>SL</strong>-<strong>D2</strong>/D4 microscope, and fasten<br />
the screw.<br />
Locating pins<br />
2 Applanation tonometer R900 type could be mounted on SO-TM1.<br />
SO-TM2<br />
1 Align the locating pins of SO-TM2 into the holes of the <strong>SL</strong>-<strong>D2</strong>/D4 microscope, and fasten<br />
the fixing knob.<br />
Fixing knob<br />
Locating pins<br />
2 Applanation tonometer 870 type could be mounted on SO-TM2.<br />
20<br />
ASSEMBLY PROCEDURE<br />
Screw<br />
*Illustration shows the<br />
<strong>SL</strong>-<strong>D2</strong> type.<br />
The holes<br />
*Illustration shows the<br />
<strong>SL</strong>-<strong>D2</strong> type.
Change language