DM100 Bitstream Analyzer User's Manual - Dolby Laboratories Inc.

More documents

Recommendations

Info

Dolby ® DM100 User’s Manual Operation: Status Mode 3.2.9 DM100 Firmware Version This last Status menu item displays the version of the firmware currently installed in your DM100. Firmware Version 2.0.0.0 Pressing [Down], [Esc], or [Status] returns the display to the top-level Main Status screen. 3-31
Dolby ® DM100 User’s Manual Chapter 4 Operation: Setup Mode Introduction Pressing [Setup] switches the DM100 into Setup mode. Use this function to configure your DM100. All setup settings are saved when the unit is turned off. The settings shown in bold are the factory defaults. The setup menu choices are: DM100 Main Setup Monitor Control The following pages show the setup selections available for each of the menu choices. 4-1 Monitor Control [Down]▐ Gen Control [Down]▐ AES3 Output [Down]▐ User Presets [Down]▐ I/O Control [Down]▐ System Settings
Page 1 and 2: ��
Page 3 and 4: Dolby Laboratories, Inc. Corporate
Page 5 and 6: Dolby ® DM100 User’s Manual Chap
Page 7 and 8: Dolby ® DM100 User’s Manual Chap
Page 9 and 10: Dolby ® DM100 User’s Manual 2-1
Page 11 and 12: Dolby ® DM100 User’s Manual Gett
Page 19 and 20: Dolby ® DM100 User’s Manual Oper
Page 47: Dolby ® DM100 User’s Manual Oper
Page 61 and 62: Dolby ® DM100 User’s Manual Refe
Page 63 and 64: Dolby ® DM100 User’s Manual Refe
Page 65: DM100 User’s Manual Reference Inf

DM100 Bitstream Analyzer User's Manual - Dolby Laboratories Inc.

Create successful ePaper yourself

Delete template?

Save as template?