Methoden voor de berekening van de emissies door mobiele ... - CBS

Outline of report
In Chapters 1 through 8 the methodologies used for calculating the emissions are described for each
source category and for each process according to a fixed structure. This structure is generally used in
the Dutch Emission Inventory for describing the calculation methods:
X.1 Introduction with a brief description of the process for which the calculation method is
described and a reference to the documents where more information can be obtained.
X.2 An overview of the contribution of the emissions to the national total and to the target group.
This indicates the relative importance of the source category for each substance.
X.3 An extensive description of the process for which the calculation method is described.
X.4 An explanation of the calculation method or methods used. In addition, this chapter indicates
which policy measures are expressed in the calculation and what effect this has.
X.5 Additional information about the origin and backgrounds of the activity data used, such as
vehicle kilometres and fuel consumption.
X.6 An explanation of the emission factors used and the corresponding data quality codes.
X.7 An explanation and description of the substance profiles used.
X.8 A description of the parameters on the basis of which the data are presented regionally .
X.9 An explanation of the uncertainties in the information and a description of the way in which
the uncertainty estimate has been established.
X.10 A description of the aspects of the calculation that could be improved.
X.11 A description of the way in which the calculation is verified.
X.12 Additional information (if applicable).
Chapter 9 pays attention to the determination of greenhouse gas emissions according to the IPCC
regulations. In particular, it addresses the differences between the actual emissions and the IPCC
emissions. Chapter 10 provides a brief summary of the methodological changes with respect to the
previous reports on methods. Table 10.1 in the EXCEL-file gives an overview of the changes.
Appendix 1 provides a summary of the quality codes for the activity data, the emission factors and the
emissions themselves (= combination of emission factor and volume).
13