SKF Timing Belt Kits - SKF.com

Catalog 457702 

2010 

SKF Timing Belt Kits

Technical overview 

In today’s modern automotive engines, there has been a quiet revolution. The 

need to run more auxiliary equipment such as water pumps or injection pumps, 

combined with efficiency demands and noise reduction, has caused new timing 

belt and tensioner systems to be developed. 

At first, tensioners were of a fixed nature, usually of metal design. They were 

simple to install: just set tension and tighten. Today, tensioners more likely 

include an internal spring or external damper, and non-metallic components 

are becoming more common. This illustration provides an overview of a modern 

timing belt and tensioner system. 

Engine-front wheel drive 

Idler pulley 

Belt 

tensioner unit 

Water 

pump pulley 

Crankshaft 

Camshaft pulley 

Timing belt 

Injection 

pump pulley 

The crankshaft drives the camshaft(s) and actuates the valves via a belt or a 

chain. Due to its advantages compared with those of a chain, namely reduced 

space, as well as lighter and quieter running, the timing belt is widely used by 

many car manufacturers.

Belt tensioner unit (TBT) 

The belt tensioner unit sets the right tension and provides guidance for the belt. 

The adjustment of tension during mounting is achieved by means of an eccentric 

or by means of a spring acting against a rear plate. 

The automatic belt tensioner unit, with its built-in spring and friction system, 

maintains a constant tension of the belt while the engine is running. 

Main designs currently used are shown here: 

Belt tensioner unit (TBT) 

with an eccentric adjustment 

Timing belt tensioner (TBT) with rear plate 

Automatic TBT with a built-in 

spring and friction system. 

Automatic TBT 

Idler p 

The idler 

Main des 

Belt te 

SKF belt 

of-the-a 

SKF in th 

world’s a 

quality a 

the SKF 

Timing 

Timing b 

greater e 

Stable, h 

Timing 

Tensile 

aramid c 

Material 

reliability 

Facing— 

the tooth 

frictional

Idler pulley 

The idler pulley is fixed and allows the belt to be correctly wound around the driven component. 

Main designs currently used are shown here: 

Idler pulley Idler pulley with rear plate 

Belt tensioner pulley (TBP) 

SKF belt tensioner pulleys for timing system are based on stateof-the-art 

technology. The years of experience accumulated by 

SKF in the design and supply of belt tensioner pulleys to the 

world’s automotive manufacturers provides assurance of high 

quality and performance of each belt tensioner unit included in 

the SKF product range. 


Timing belts offer numerous advantages over chain and gear drives: 

greater efficiency, reduced weight, quieter operation and fuel savings. 

Stable, high tensile strength synthetic cords resist shrinking and stretching. 

Timing belt construction 

Tensile cords—High tensile strength fiberglass or 

aramid cords resist stretching and shrinking. 

Material—Durability, performance and 

reliability in tough engine environments. 

Facing—Wear resistant fabric protects 

the tooth surface and keeps 

frictional loss at a minimum. 

Rubber tooth 

Tooth facing 

Rubber backing 

TBP with a rear plate 

Tensile members 

Timing belt

How to use this catalog 

This catalog has been divided into three sections: Applications, Information and Reference 

1.) Refer to the table of contents for page number of section that is desired. 

2.) How to use timing belt kit application section 

Simply locate 1 Manufacturer (manufacturer's are located in alphabetical order-refer to manufacturers index) and 

model, 2 locate year and message, 3 locate your application information and once application has been found, 

4 find the SKF kit number. (See below) 

1 

Honda Truck Passport, Ridgeline 

Engine 

Timing Belt and Tensioner Kit 

2006 Ridgeline w/3.5L Eng.: 

Belt & Tensioner Kit w/Water Pump .....................t TBK329WP 

2002-1998 Passport w/3.2L Eng.: 


1997-1994 Passport w/3.2L Eng.: 2 


3 

4 

Engine (Cont.) 

Timing Belt and Tensioner Kit (Cont.) 


Belt & Tensioner Kit w/Seals .................................... t TBK147P 

t Interference engine for most applications. 

3.) Included for your information are: Engine drive system-overview, kit contents, installation information and frequently 

asked questions. 

4) For your reference included are: belt specifications, troubleshooting and failure analysis, good practices and helpful hints and a 

kit reference buyer's guide. 

Note: Part numbers with WP suffix (ex: TBK221WP) indicate kit contains a premium water pump plus camshaft and timing cover 

seals along with belt(s), tensioners, idlers and detailed instruction sheets. (See kit product box image below on right side) 

Part number with P suffix (ex: TBK147P) indicate kit contains camshaft and timing cover seals plus belt(s), tensioners, idlers 

and detailed instruction sheets. (See kit product box image below on left side) 

1

Table of contents 

Applications 

Manufacturers model index .......................................................................................... 22 

2 

Passenger car and light truck........................................................................................ 24 

Information 

Engine drive systems ........................................................................................................3 

Failure analysis overview ............................................................................................... 11 

Chrysler application installation information .............................................................. 17 

Cadillac, Saab and Saturn application installation information ............................... 19 

Ford & Mercury application installation information ................................................. 20 

Abbreviation list .............................................................................................................. 21 

Kit contents ...................................................................................................................... 51 

Frequently asked questions ........................................................................................... 74 

Reference 

Belt performance and quality ....................................................................................... 75 

Belt specifications ........................................................................................................... 76 

Timing belt removal and installation............................................................................ 81 

Typical timing belt installation ....................................................................................... 82 

Troubleshooting and failure analysis for timing belts ................................................ 83 

Belt life vs correct tension ............................................................................................. 84 

Analyzing belt wear and damage ................................................................................. 85 

Troubleshooting and failure analysis for all other components ............................... 86 

Good practices and helpful hints .................................................................................. 89 

Setting up automatic tensioners: a typical example .................................................. 90 

Kit reference buyer's guide ............................................................................................ 92

Engine drive systems 

Technology and material changes 

Many components and systems in the engine depend 

on the correct functioning of the timing and auxiliary 

drives. This is also driving the technology and design 

of these systems, so they can live up to the more 

demanding criteria required. 

Timing drive system 

The controlled operation of this system is dependant 

on either a chain or a belt. A general drive for design 

improvement for performance gain, coupled with the 

pressure to reduce emissions, have seen twin overhead 

cam, multi-valve engines become commonplace. 


A timing belt is typically rubber with high-tensile fibers 

(e.g. fiberglass or Kevlar) running the length of the 

belt. Rubber degrades with higher temperatures and 

contact with motor oil and antifreeze. Therefore, the life 

expectancy of a timing belt is lowered in hot or leaky 

engines. While older belts were of chlorobutadiene 

rubber material and trapezoidal shape, today’s modern 

belts are even more specific to particular engine 

designs, with subtle profile changes to the curvature 

of the teeth. In addition the improved material means 

these new designs optimize the power transfer without 

wear or noise, reaching ever higher lifespans in excess of 

over 93,000 mi/150 000 km. 

Timing chains 

Encased on the front of the engine, this power 

transmission drive frees up space to give the auxiliary 

system more space. On average, these chain systems 

have a longer life span on recent engines. The typical 

life of a chain is around 74,500 – 155,300 mi/120 000 

km – 250 000 km. The disadvantage with chains is that 

they are noisy in comparison with belts and they lack 

the capacity to handle modern hp injection systems. 

In the immediate future (5–10 years), new cars sold 

with chains fitted on the engine drive system will rise by 

around 50%. 

Timing system, belts vs. chains 

For car manufacturers, engine assembly is all about 

numbers built – faster. Unfortunately, the time taken 

for the ABTU and belt on the timing system to be set up 

correctly, can eat into production time. Chains are easier 

and faster to install. This fact contributes to the use of 

chains today. The use of high performance material such 

as HSN, advanced automatic tensioner units, specialized 

bearings and pre-set tensioner springs for speedier and 

easier mounting, adds up to belt systems that reach 

the life time level of chains, while still offering design 

flexibility, cost and weight savings, as well as easier 

maintenance in the aftermarket. This is an advantage 

when it comes to car manufacturers’ choice. But, for 

now, chains are still the preferred option. 

Timing belt system 

Timing chain system 

3


Manual timing belt tensioner (MTBT) 

The original timing assembly process, when mounting 

onto the engine, was accomplished by manually 

setting the tensioner by rotating the tensioner unit and 

locking it permanently at the required tension. This 

meant that as the engine warmed up to ever higher 

temperatures, and new designs required different 

operating characteristics with higher performance, the 

fixed tension control from the manual BTU was not 

able to reach the desired performances for extended 

component life required by the designers. 

Automatic timing belt tensioner (ATBT) 

The ATBT promotes longer belt life, by better handling 

of the engine loads, and is less affected by running 

temperature variations after correct set up. This is why 

it has become the norm fitted to today’s belt-driven 

engines. These tensioner units are made up of many 

functional sub-components that ensure the correct 

operation of the automatic tensioner. 

Key ATBT components: 

1. Mounting eccentric: Provides smooth adjustment by 

rotation to facilitate correct set-up of initial tension. 

2. Bushing: Self-lubricating, highly wear-resistant 

polyamide component. Primary source of damping. 

Also provides axial alignment and sliding surface. 

3. Bearing: Maintenance-free and sealed for life. The 

component is specifically adapted for the relevant 

application. 

4 

1. 

2. 

3. 

Belt load, N 

4. 

250 

200 

150 

MTBT ATBT 

4. Pulley: Metal or polyamide, depending on the 

application. 

5. Hub: Transmits the torque of the spring to the pulley. 

6. Spring: Designed to provide optimum belt tension 

control for engine running. 

7. Pivot shaft/plate: Ensures proper placement and 

angular location on engine block. 

5. 

Noise generation 

MTBT 

100 

ATBT 

50 

0 

Belt losing grip 

32 / 68 / 104 / 140 / 176 / 212 / 248 / 284 / 320 / 

0 20 40 60 80 100 120 140 160 

Engine temperature, °F / °C 

6. 

MTBT vs ATBT chart 

7.


Variations of ATBT design 

Even an apparently basic pulley component may need 

to be used differently when the engineer sets his 

specification. There are pros and cons when it comes 

to the optimum choice of materials best suited to a 

particular engine’s requirements: 

The polyamide pulley: 

Positives: 

• Polyamide is light. 

• Polyamide retains heat longer than metal. 

• The clearance of the bearing is not affected by the 

moulding. 

Negatives: 

• Dirt and grit can be embedded in the plastic, risking 

belt damage. 

• Moulding process can affect the bearing and grease 

life. 

The metal pulley: 

Positives: 

• Thermal properties of steel dissipate heat efficiently. 

• Metal resists abrasion to maintain proper belt 

alignment. 

• Metal deflects dirt and grit particles. 

Negatives: 

• The assembly can affect the clearance of the bearing 

causing operation and life issues. 

• Metal is heavy compared to plastic. 

Hydraulic automatic timing belt tensioner 

The hydraulic system design is mainly used on 

applications with high loads and/or angular vibrations, 

where a mechanical automatic tensioner cannot provide 

sufficient damping or tensioner movement. Due to weight 

and space limitations, the design is limited to a few 

engine types and is not expected to become as common 

as the more compact ATBT. 

The unit can operate with a large range of dynamic belt 

lengths, unlike the mechanical tensioner, due to the 

length of stroke of the actuator and the lever design. The 

damping characteristics from the piston are particularly 

suitable for large V6/V8 engines (amongst others). 

These units are made up of many functional sub-components that 

provide the correct operation of the automatic tensioner. 

Hydraulic automatic timing belt tensioner 

5


Aggressive oils 

The additives used with engine oils have changed in 

order to cope with increasing temperatures and the 

extension of oil change intervals. This has led to oils 

attacking some conventional fluorpolyamide (rubber) 

materials. PTFE is inert, so the changes to material 

properties, and hence reduced sealing capability, have 

been eliminated. 

Robust design 

The design of a PTFE seal means that the sealing lip 

contacts the shaft over a width of 0.079-0.118 in/2–3 

mm. This compares with a width of 0.004-0.008 in/ 

.1–.2 mm for a conventional rubber seal. If there is 

a small defect in the shaft’s sealing lip, then with a 

conventional seal, this would probably lead to leakage. 

With the much wider sealing track of the PTFE, the 

probability that the same defect will lead to leakage is 

much reduced. 

Reduced wear 

Shaft wear is an important issue. With PTFE, because of 

the wide contact area, the depth of wear grooves in the 

shaft is significantly reduced. 

6 

Valve stem seal 

line contact surface contact 

Shaft contact with rubber seal. 

Shaft wear conventional rubber materials. 

Shaft wear with PTFE. 

Shaft contact with PTFE seal. 

Static plug Spark plug tube seal Sensor seal 

Oil pan drain plug Valve cover seal Rear retainer assembly / Rotostat 

shaft 

shaft


Cooling system 

With gasoline most of the energy (about 70%) is 

converted into heat from the effects of friction and 

combustion. The cooling system must keep the engine 

from overheating, obviously, but it should also be 

efficient, allowing the engine to operate within a tight 

temperature range to reduce friction. 

Water pump 

Water pump requirements, like other components, are 

becoming more exact and demanding; pump rates, 

pressures and fluid flow paths contribute to the efficient 

operating temp of the engine, and provide precise 

cooling performance. 

Water pumps have been constantly improved through 

the years, but due to the aggressive operating 

environment of the engine, a water pump replacement 

will most likely be performed sometime during the life 

of a motor vehicle. Today, they are very often an integral 

part of the timing drive system. 

Timing belt kit, including water pump. Here is a popular VAG engine timing layout where, typically the 

water pump is an integral part. 

7


Auxiliary drive system 

The role of this particular drive system is growing 

in importance every day, as modern cars cover 

more demanding consumer requirements; comfort, 

electronic devices, fuel efficiency, etc. PAS (power 

assisted steering) and AC (air conditioning), once costly 

options are now standard on a wide range of cars. The 

aftermarket for multi-V belt idler and tensioner units 

has seen a steady rise as a result of this technology 

being implemented. The auxiliary drive system will 

continue to grow in importance for the modern car in 

the coming years. 

Multi-V belt 

The multi-V drive belt has become standard on new 

applications since the late 90’s. The design covers the 

need to drive multiple accessories from one belt around 

a compact area. The belt therefore needs to be flexible 

to offer tight wraps and return the belt on small radius 

pulleys, but also to be able to handle the higher tension 

needed to “grip” the functioning components without 

slippage. Reliability and endurance should similarly 

match the timing system on the engine. 

The multi-V belt operates in tough environments, 

sometimes low down on the car and often exposed 

to dirt, water and oil, and with more utilities added 

to the car, the strain on the belt increases. Other 

arrangements may see the system operate high up in a 

compact area where higher temperatures will affect the 

belt. Newer materials, such as EPDM, are common on 

the belts offering superior performance features. 

Even though the multi-V belt profile (pk) has become 

a recognized standard, there is no standard belt for 

the application. For every engine model there can be 

more than a handful of different auxiliary drive belt 

arrangements (different span lengths), depending 

on the type of equipment fitted. This span 

length is very important, down to the 

last millimeter for optimum operation. 

8 

A typical timing or multi-V belt will, in its lifetime, travel a distance 

equal to one lap around the world, where the teeth of the timing 

belt takes as many “bites” as there are people in the world. When 

the lap is completed, and sometimes sooner, as people today travel 

longer distances more quickly, the belt and bearing components 

need to be replaced.


Metal idler, with 

double row bearings (VW). 

Polyamide idler, with 

single row bearing (Fiat). 

Accessory belt idler pulley (ABIP) 

Idler 

Idlers can be found in varied positions on the engine 

timing system, each with specific loading and 

performance conditions. Today’s engineers are trying to 

find ways to increase the life span of the idler to reach a 

target of 124,300 mi/>200 000 km (with the eventual 

aim of it having the same life span as the engine). They 

need to withstand the higher operating conditions 

through component design evolution. For example, a 

significant area of improvement is bearing sealing and 

greases. Finally more polyamide pulleys fitted results in 

overall weight gain for the designers. 

Engine seal 

Engine sealing arrangements have advanced 

dramatically over the last few years. Although hidden 

from view, modern sealing techniques, such as 

moulded-in-place permanent gasket solutions, have 

delivered significant improvements in achieving oil-tight 

assemblies for the effective life of an engine. Dynamic 

sealing, for crankshafts and camshafts, is now receiving 

similar design and material attention. 

Traditional elastomeric lip seals are today being replaced 

by PTFE (PolyTetraFluoroEthylene) thin film seals. They 

offer extended sealing life and a far greater level of 

protection from chemical attacks. This is a particular 

problem with diesel engines and some of the more 

exotic synthetic based oils. However, these provide the 

extended service intervals demanded in the market-place. 

slack span 

The idler pulley allows the belt to be correctly wound 

(providing optimum wrap angle) around the driven 

components, while also reducing the free belt length, 

which, if not accurately calculated into the design build, 

could cause excess vibrations and noise. 

1. Sealing lip (varied material) 

2. Metal or rubber casing 

3. Contact spring 

Standard PTFE-seal with 

elastomeric or felt dust lip. 

4th Generation PTFE-seal 

with improved durability 

and “easy-assembly”. 

Unitized PTFE-seal for 

heavy contamination. 

Idler 

Traditional engine shaft seal design 

1. 

tight span 

engine 

rotation 

Modern engine shaft seal designs - PTFE: 

2. 

3. 

9


Automatic accessory belt tensioner unit 

(AABT) 

In the auxiliary drive, the control tension can be 

provided by an hydraulic piston damping solution. This 

is a mechanical belt tensioning device based on spring 

and damping components to provide the running 

tension required for the belt. Due to the materials 

used, high and consistent damping values, irrespective 

of temperature and frequency, as well as minimal 

running-in effects, can be achieved. 

It is usually very easy to set up this unit for assembly 

for engine build for manufacturers and also for 

maintenance. It is normally bolted on and pin-released. 

The tension is, of course, optimized based on specific 

belt and components fitted into the system. 

Future trends 

One direction being pursued to lower fuel consumption 

is the new technology called “stop/start” based on a 

combined starter/alternator and electronics. 

When the car is moving around town, for example, 

below 30 mi/hr/50 km/hr, or if it stops a traffic jam, the 

engine is automatically shut down and electric motors 

powered from battery could drive the vehicle. When 

speed increases to a suitable level or the car needs to 

accelerate, the normal combustion engine is restarted 

automatically via the auxiliary drive system. So, in effect, 

this system is restarted via the combined alternator/ 

starter. 

Power steering may move away from auxiliary drive 

systems in the future, due to an electrical conversion 

of the function. 

10 

AABT

Failure analysis overview 

90% of engine running faults are caused by basic 

problems, many of which can be prevented by correct 

mounting and maintenance. 

This chapter will cover some of the most common 

drive system failures and how to prevent them from 

happening. 

Engine 

Today, the timing cycle of the engine is more crucial 

than ever. Almost every new engine is the “interference” 

type, with the valves and pistons in close proximity. A 

broken or “tooth-jumped” timing belt can cause the 

piston to crash into an open valve, resulting in bent 

valves, broken pistons, and serious engine damage. 

Even though the older “non-interference” engines with 

timing belt problems may not sustain the same type of 

damage as “interference” engines, the driver will still be 

stranded with a dead engine beside the road. 

Timing drive system 

Engine oil seal 

Common failures: 

1. Heat builds up (poor lubrication). 

2. Stress due to out of round shaft (worn crankshaft/ 

camshaft). 

These conditions will eventually cause the seal to fail, 

with leakage and/or ingress of particles into the oil as 

a result. 

- Don’t let this happen to your customers! 

An example of engine 

damage caused by timing 

component failure or 

tooth jump. 

1. Heat builds up 2. Stress due to out of round shaft 

Here you can see oil on 

the tensioner. A leaking 

oil pump or damaged 

engine seals will cause 

the tensioner to fail. 

11



The material in the belt is sensitive to bending 

(crimping) more than its maximum natural curve, and 

should therefore be treated gently. 

Common failure causes: 

1. Incorrect tension. 

2. Misalignment. 

3. Foreign object in the drive system (oil, cooling liquid, 

water, stone, etc). 

4. Contamination or uneven surface between the 

tensioner mounting plate and the engine block. 

5. Tensioner/Idler failure. 

6. Worn crankshaft or camshaft dampers. 

2. Misalignment (incorrect centering of the belt) 

The edge of the belt has been worn down to almost half its size. On 

the tensioner, you can see clear marks indicating a misaligned belt. 

4. Contamination on the belt 

If the belt has been contaminated with oil or water, you will see this by 

the glazing on the belt. You may feel it, as the belt will be soft and the 

rubber coming away from the construction. 

12 

1. Incorrect tension 

You can see on the tensioner that the surface has been colored blue/ 

brown from the heat. On the belt you see traces of wear in the middle. 

This indicates that the tension is too high, i.e. bad mounting. 

3. Foreign object in the timing drive system 

You can see on the belt pictures, showing both sides, that a foreign 

object, or perhaps a damaged tooth on the pulley, have made marks in 

the belt that eventually cracked. 

Engine type 

Depending on the design of the engine, the piston 

and valve paths may “interfere” with one another, and 

incorrect timing in their movements may result in 

the piston and valves colliding. (Such designs are also 

called “interference head” or “interference engines”. 

Conversely, non-interfering engines are called “freewheeling” 

or “non-interference” engines.)


Tensioner and idlers 

A common reason for bearings to fail early, is 

the tension being too high or when there is load 

misalignment outside the set parameter for that bearing 

design. Wrong belt centering will cause the bearing to 

run off line due to an increased radial load. See picture 

to the right. 

Load forces are only one of the key factors that need to 

be calculated in the design phase of the tensioner. 

The International Standards Organisation (ISO) has 

adopted the SKF Life Theory in ISO 281 to calculate 

bearing life. 

Always use the correct equipment to set the belt tension 

when a TBT is changed. Check car manufacturers’ 

specifications for correct tension value. 


1. Bad mounting. The component has been damaged 

when mounting or adjusting the tension. 

2. Wrong torque. The mounting bolts have not been 

tightened to the car manufacturers’ specification. 

3. Leaking oils/fuels will cause plastic damage 

(softening/cracking). 

4. The engine is not at the ambient temperature when 

the components are mounted and set up. 

5. Mounting of tensioners/idlers onto uneven or 

contaminated surfaces on the engine block. 

6. The timing cover may be damaged and foreign 

objects can enter the timing system. 

7. If the idler or tensioner is dropped, even if the 

external damage does not seem important, internal 

components (balls, cage, etc.) can be weakened or 

damaged. 

Axial load, F a 

Radial load, F r 

1. Bad mounting 

Combined load 

The tensioner has been blocked, stopping correct rotation, caused 

by damage to the tensioner during tension set-up and initiated from 

incorrect mounting onto the engine block. 

2. Wrong torque 

The indicator arm has been hammering on its end stop. 

The mark from the mounting bolt around the mounting hole is clearly 

visable. It has weakend the bolt and loosened the tensioner. 

5. Mounting problem 

You can see friction marks 

and corrosion on the back of 

the tensioner. This is caused 

by the tensioner running 

loose and has turned during 

the engine running. 

13


Troubleshooting the ATBT set-up: 

1. The mounting bolt is not correctly torqued (to 

car manufacturer recommendations). If it is not 

tightened, the tensioner will gradually loosen under 

running, and the indicator arm may come into 

contact with the end stop. The engine begins to run 

rough as the timing is affected, before failing. 

2. Incorrect mounting (location pegs or holes are not 

correctly located). 

3. Correct set-up is not possible for proper running 

of the engine. Check for correct back plate locating 

point; some engines can indicate incorrect 

alternatives causing visual error. 

4. Unevenness between the mounted tensioner plate 

and the engine block can cause incorrect tension/ 

belt run out or even block bearing rotation. Check for 

debris or possible fouling points on mounting. 

5. The indicator arm is not set to the correct tension 

position. You need to turn the engine twice to 

reconfirm a correct position. If it is not in the advised 

position, remount and perform the set up process 

again. Don’t take the risk, play it safe and be sure. 

Hydraulic tensioner 

Apart from the traditional weaknesses on the tensioner 

pulley component, the actuator part can be affected by 

wear and premature failure. 


1. An oil leakage through the seal. Even the smallest 

leak in the actuator through time will cause gradual 

loss of damping effect and possible belt damage 

(ripped teeth from poor tension may be found). 

2. Failure in the spring or valves will lead to system 

failure, and probably engine damage, very quickly. 

To maintain correct function, this damping control unit 

should be changed at the same period as the timing belt 

and pulleys (around 70,000 mi/around 110 000 km). 

14 

1. Wrong torque 

The indicator arm on the ATBT is broken. 

1. Oil leak through the seal of the hydraulic tensioner


Water pumps 

Although modern coolant pumps are maintenance-free 

for a number of years, they are not fault-free and some 

problems do occur: 

A water pump leak can be due to: 

1. Damaged water pump seal due to incorrect 

mounting. 

2. The use of excessive or wrong sealant type with 

gaskets or O-rings. This can lead to early leakage or 

even incorrect mounting angle when tightened. This 

leads to incorrect centering of the belt. Here, you 

can see rubber residue on the idler and the coating 

around/under the O-ring. 

3. A badly corroded water pump, whose lifespan has 

expired. This pump was not changed in time during 

the timing system maintenance. A severe leakage of 

coolant past the mechanical seal and out of the drain 

vent, washed the grease from the bearing spindle 

and this lead to the failure/breakdown. 

4. Abrasive particles originating from metal corrosion/ 

erosion are carried around by the circulating coolant 

and score the seal contact faces. 

5. Worn spindle bearings allow shaft misalignment to 

occur between the seal contact faces. 

The water pump may be inefficient due to: 

1. Metal corrosion/erosion gradually destroying the 

form of the impeller vanes. 

2. Excessive end float of the impeller spindle in its 

bearing increasing the working clearance between 

the impeller vanes and the pumping chamber. 

3. Internal engine condition and component life is 

highly dependant on good coolant, which prevents 

the build-up of corrosive and/or calcareous 

materials that are harmful to a water pumps’ 

components. A thorough flush through and complete 

refill with approved coolant type for the engine is 

recommended to ensure maximum life from a new 

water pump. 

1. Incorrect mounting 

2. Excessive sealant 

3. Life-span expired 

15


If you hear noise coming from the water 

pump, it could be for one of the following 

reasons: 

1. Wear in the impeller spindle shaft bearing assembly 

due to foreign particles through grease loss. 

2. Airlocks, due to an improperly purged cooling system. 

3. Bad coolant forms coating on mechanical seal giving 

rise to noise. 

Auxiliary drive system 

Multi-V belt 

Common causes of failure: 

1. Damage to the timing system, causing an engine 

breakdown. 

2. Overheating, if it is water pump driven. 

3. Loss of power steering. 

4. Dead battery, i.e. non-operational alternator. 

5. In the long term the stop/start mechanism will not 

function, thus the car will not function if the belt 

breaks when the car is in the stop mode. 

Damage from other components can also be the cause 

of the system failure – mounting brackets, damper 

units, and injection/water pumps. 

Tensioner and idler 

Common failures often follow similar patterns to the 

timing system tensioners and idlers. However, the metal 

parts are more prone to corrosion and material debris 

due to their low position on the engine in relation to 

the road. Any damaged covers will allow this material to 

enter. 

16 

3. Wrong/bad coolant 

1. Damage to the timing system 

The driver of a car with a broken multi-V belt could be left with a 

non-functioning alternator, loss of power steering or, in the worst 

case, even a belt that has entered the timing system resulting in 

engine breakdown. 

Note: For more detailed information on troubleshooting and failure analysis see pages 86 thru 88. 

Loss of power steering. 

Tensioner bracket and shaft has become 

misaligned due to heavy belt load.

SKF Timing kits 

Application installation information—Chrysler 

TBK245WP, TBK245AWP & TBK245BWP 

Chrysler 2.0L SOHC—Timing drive tensioner troubleshooting 

The 2.0L Chrysler engine has gone through several timing belt tensioner design changes 

since its introduction in 1996 through 2005. Three different timing belt tensioners 

were used between 1995 and 2005, and tensioner TBT55016 is considered the 

recommended replacement assembly for all three. Not included in any TBK kit, the 

TBT55016 is only available separately to ensure proper replacement. 

First design 

The 2.0L engine was originally produced with the hydraulic timing belt tensioner 

assembly TBT55008. The complete assembly is not sold in kits. The complete assembly 

TBT55008 is available separately if needed. 

The pulley used with this design can be serviced with pulley part number TBT51001, the 

pulley bearing is included in TBK245WP. 

TBT51003 has the TBT51001 bearing, with hydraulic tensioner bracket attached. 

TBT51003 is included with kit TBK245BWP. 

TBK245WP, TBK245AWP or TBK245BWP all include a W1201300 water pump. 

Note: Previous timing belt replacement(s) may have utilized the TBT55016 design. Check 

components on vehicle to make sure the correct kit is selected. 

Second design 

The second timing belt tensioner design is no longer available. The recommended 

replacement is tensioner TBT51006 which is available in kit TBK245AWP or to retrofit 

the complete assembly. TBT55016 is available separately if needed. 

Third design 

Tensioner TBT55016 is a direct replacement for this design. The tensioner without 

the bracket is available as part number TBT51006. This tensioner (without bracket) is 

included in TBK245AWP which also includes a W1201300 water pump. TBT55016 is 

available separately if needed. 

TBT51001 

TBT51003 

First design—TBT55008 assembly 

w/TBT51003 mounted 

Second design w/steel bracket 

TBT51006 Third design—TBT55016 w/aluminum 

bracket 

17


Application installation information—Chrysler 


Chrysler 2.4L DOHC—Timing drive 

TBK265WP - Idler (TBP51007) and Tensioner (TBT51006) 

Fits Chrysler 2003 and newer vehicles. 2002 and older vehicles will require modification of the inner cover if the complete assembly 

TBT51016 is to be installed. 

TBK265AWP - Idler (TBP51007) and Tensioner (TBT51016) 

Fits Chrysler 2003 and newer vehicles, but can be retrofitted on older vehicles with some modification of the inner timing cover. 

TBT51016 is a complete assembly with TBT51006 mounted on bracket. 

TBK265BWP - Idler (TBP51007) and Tensioner (TBT51004) 

Replaces original equipment on 2002 and older vehicles. 

Note: Previous timing belt replacement(s) on 2002 and older vehicles may have utilized the TBT51016 design. 

Check components on vehicle to make sure the correct kit is selected. 

18 

TBP51007 

2003 and newer inner 

timing cover 

TBP51007 

TBP51007 

TBT51006 

2002 and older inner 

timing cover 

TBT51016 assembly 

w/ TBT51006 mounted 

TBT51004


Application installation information—Cadillac, Saab, Saturn 

TBK285P, TBK285AP & TBK285BP 

Cadillac, Saab, Saturn V-B 3.0L 

All three makes with V-6 3.0L utilize the same lower idler (TBT25500). 

TBT25500 Front TBT25500 Back 

Original design utilized a fixed lower idler which is no longer available. TBT25500 is available and is an adjustable idler. Note: 

TBT25500 must be adjusted properly to prevent the belt from “tracking off the drive”. Validate the spacer thickness before 

reinstalling TBT25500 to ensure proper distance from engine block is maintained. If spacer is damaged, do not substitute, obtain 

correct spacer from OEM manufacturer. Spacer is not provided in kit to ensure you re-use old, undamaged spacer or replace spacer 

with correct thickness from the OEM manufacturer. 

TBK285P—Includes seal and TBT15500 assembly. This assembly is set 

at the factory. Avoid loosening the adjusters prior to reading full set of 

instructions included in kit to prevent belt mis-alignment. Adjust belt with 

TBT25500. 

1999 (Early) .........................................Cadillac Catera 3.0L 

1998-97 ...............................................Cadillac Catera 3.0L 

1997-95 ...............................................Saab 9000 3.0L 

1999 (Early) .........................................Saab 9-5 3.0L 

TBK285AP—Includes seals and TBT55002 assembly. This assembly is 

set at the factory. Avoid loosening the adjusters prior to reading full set of 


TBT25500. 

2001-00 ..............................................Cadillac Catera 3.0L 

1999 (Late) ..........................................Cadillac Catera 3.0L 

2002 (578511 & before) ...................Saturn L-Series 3.0L 

2001-00 ..............................................Saturn L-Series 3.0L 

TBK285BP—Includes seals and TBT55001 assembly. This assembly is 

set at the factory, avoid loosening the adjusters prior to reading full set of 


TBT25500. 

2003-00 ...............................................Saab 9-5 3.0L 

1999 (Late) ...........................................Saab 9-5 3.0L 

2005-03 ...............................................Saturn L-Series 3.0L 

2002 (578512 and after) ...................Saturn L-Series 3.0L 

2003-02 ...............................................Saturn Vue 3.0L 

Note: Verification of the tensioner/idler bracket on the vehicle is recommended prior to selecting a TBK as designs changed in mid-model years 

1999 and 2002. 

19


Application installation information—Ford & Mercury 


Ford & Mercury 2.0L engines 

All of these kits fit 2.0L Ford engines. Note: the timing belt drives on these engines are very sensitive to belt tension. If the 

tensioner is not adjusted correctly the belt will lose tension and walk off the drive. This may damage the belt and possibly 

damage other engine components. 

TBK294WP 

The upper idler (TBP64004) in 

TBK294WP has an outside diameter of 

70 mm / 2.756 in. (w/DOHC) 

Special installation instructions for TBK294WP, TBK294AWP & TBK294BWP 

• Proper installation and belt tension is critical to insure the belt does not track off the drive. 

• Ford Contours, Mercury Cougars and Mystiques built after 3/28/99 must use TBK294AWP. 

Ford Contours, Mercury Cougars and Mystiques built before 3/28/99 use TBK294WP. Confirm idler pulley diameter is 

correct before opening kit. (Not required for TBK294BWP) 

• Ford Escorts built after 2/9/99 must use TBK294AWP, and those built prior to 2/9/99 should use TBK294WP. Confirm idler 

pulley diameter is correct before opening kit. (Not required for TBK294BWP) 

• Tensioner mounting bolt must be installed with proper torque. 

• Base plate tab on automatic tensioner must be inserted in hook up slot. 

• Tensioner adjustments should be made in a counterclockwise direction only. 

After installation is complete, with the top timing belt cover removed, start the vehicle, and from a safe distance observe the 

timing belt. Belt should be tracking straight and consistent over the camshaft sprockets. Shut off vehicle and check tensioner 

for proper adjustment. Installation instructions for tensioning must be followed completely. Camshafts must be secured 

with cam sprockets free to rotate on shafts prior to adjusting the tensioner. Repeat this procedure until proper tensioner 

adjustment is achieved. Improper tension will cause the belt to track off the pulley. Do not attempt to adjust tension while 

the engine is running. 

20 

TBK294AWP 

The upper idler (TBP64005) in 

TBK294AWP has an outside diameter 

of 60 mm / 2.362 in. (w/DOHC) 

TBK294BWP 

TBK294BWP uses the same upper idler 

as TBK294AWP and does NOT have a 

lower idler pulley. (w/DOHC)

Abbreviation list 

ABS ............ Anti-Lock Brake System 

A/C ............. Air Conditioning 

Acsry .......... Accessory 

Adj .............. Adjustable 

Alt ............... Alternator 

Amp ........... Ampere 

Assy ............ Assembly 

Auto ........... Automatic 

Aux ............. Auxiliary 

A.W.D. ........ All Wheel Drive 

Bbl .............. Barrel 

Brckt .......... Bracket 

Brg(s) ......... Bearings 

Brk(s) ......... Brakes 

Carb ........... Carburetor 

Cat .............. Caterpillar 

cc ................ Cubic Centimeter 

CFI .............. Central Fuel Injection 

Chas ........... Chassis 

Chev ........... Chevy 

Comm ........ Commercial 

Comp ......... Compressor 

Ctr .............. Counter 

Cu. In. ......... Cubic Inch 

Cvr .............. Cover 

Cyl............... Cylinder 

Del .............. Delivery 

Dia .............. Diameter 

Diff ............. Differential 

DOHC ......... Dual Overhead Cam 

D.S.O. ......... Domestic Special Order 

EFI .............. Electronic Fuel Injection 

Eng(s) ......... Engine(s) 

Exc.............. Except 

Ext .............. Extension 

F.C. ............. Forward Control 

Flg(d) .......... Flange 

Frt............... Front 

F.W.D. ......... Front Wheel Drive 

Gen ............. Generator 

Gr ............... Gear 

G.V.W. ........ Gross Vehicle Weight 

H.D. ............ Heavy Duty 

Hi-Perf ...... High Performance 

Hi-Temp .... High Temperature 

HO .............. High Output 

H.P. ............. Horsepower 

HSC ............ High Swirl Combustion 

Hsg(s)......... Housing(s) 

Hyd ............. Hydraulic 

I/C ............... Intercooler 

I.D. .............. Inside Diameter 

Incl ............. Includes 

Inj ............... Injection 

Inn .............. Inner 

lb(s) ............ Pounds 

L ................. Litre 

LD ............... Light Duty 

L.H. ............ Left Hand 

Limo ........... Limousine 

LP ............... Limited Production 

LPG ............ Propane Fueled 

Lt ................ Light 

Man ............ Manual 

Mech .......... Mechanical 

Med ............ Medium 

MFI ............. Multi-port Fuel Injection 

Mfr ............. Manufacturer 

mm ............ Millimeter 

M.H.C. ........ Motor Home Chassis 

Mtg ............. Mounting 

N. Asp. ....... Naturally Aspirated 

No(s) .......... Number(s) 

NP .............. New Process 

NPG ............ New Process Gear 

O.D. ............ Outside Diameter 

O/D ............. Overdrive 

O.H.C. ......... Overhead Cam 

OHV ............ Overhead Valve 

Pass ............ Passenger 

Pkg ............. Package 

P/C .............. Police Car 

Pwr ............ Power 

Rev ............. Reverse 

R.H. ............ Right Hand 

Rr ............... Rear 

R.W.D. ........ Rear Wheel Drive 

SC ............... Supercharged 

Sed ............. Sedan 

SEFI ........... Sequential Multi-port Fuel 

Injection 

Ser ............. Serial Number 

Sh ............... Shaft 

SOHC ......... Single Overhead Cam 

Spdl ............ Spindle 

Spd ............. Speed 

Specs ......... Specifications 

Sta .............. Station 

Std .............. Standard 

Strg ............ Steering 

T/C .............. Turbo Charger 

Tens............ Tensioner 

THM ........... Turbo Hydramatic 

Trans .......... Transmission 

Trk .............. Truck 

Turbo .......... Turbocharged 

Vin .............. Vehicle Identification Number 

VV ............... Variable Venturi 

w/ ............... With 

w/o ............. Without 

W.B. ........... Wheel Base 

Wgn ........... Wagon 

Whl(s) ........ Wheel(s) 

1st .............. First 

2nd ............. Second 

2 W/D ........ Two Wheel Drive 

4 W/D ........ Four Wheel Drive 

2 W/S ......... 2 Wheel Steering 

4 W/S ......... 4 Wheel Steering 

21

Manufacturer to model index 

Manufacturer and model Page Manufacturer and model Page Manufacturer and model Page 

ACURA ............................................................ 24 

2.2CL ............................................................ 24 

2.3CL ............................................................ 24 

2.5TL ............................................................ 24 

3.0CL ............................................................ 24 

3.2CL ............................................................ 24 

3.2TL ............................................................ 24 

3.5RL ............................................................ 24 

Integra .......................................................... 24 

Legend ......................................................... 24 

RL .................................................................. 24 

TL .................................................................. 24 

Vigor ............................................................. 24 

ACURA CUV ................................................... 24 

MDX .............................................................. 24 

SLX ............................................................... 24 

AMERICAN MOTORS ................................... 24 

Concord ........................................................ 24 

Gremlin ........................................................ 24 

Spirit ............................................................. 24 

AUDI ............................................................... 24 

100 ............................................................... 24 

200 ............................................................... 24 

4000 ............................................................. 25 

4000S .......................................................... 25 

80 ................................................................. 24 

90 ................................................................. 24 

A3 ................................................................. 24 

A4 ................................................................. 24 

A6 ................................................................. 24 

A8 ................................................................. 24 

Cabriolet ....................................................... 24 

Fox ................................................................ 25 

RS6 ............................................................... 24 

S6 ................................................................. 24 

S8 ................................................................. 24 

BMW .............................................................. 25 

325i .............................................................. 25 

325ic ............................................................ 25 

325iS ............................................................ 25 

325iX ............................................................ 25 

525i .............................................................. 25 

BUICK (FWD) ................................................ 25 

Skyhawk (from 1982) ................................ 25 

CADILLAC (RWD) ......................................... 25 

Catera ........................................................... 25 

CHEVROLET (FWD) ..................................... 25 

Aveo .............................................................. 25 

Aveo5 ........................................................... 25 

Lumina ......................................................... 25 

Metro (from 1998) ..................................... 26 

Monte Carlo ................................................. 25 

Nova (1988-85) ......................................... 26 

Spectrum ..................................................... 26 

CHEVROLET TRUCK .................................... 26 

Tracker (from 1998) ................................... 26 

CHRYSLER (FWD) ........................................ 26 

300M ............................................................ 26 

Cirrus ............................................................ 26 

Concorde ...................................................... 26 

E Class/New Yorker (1993-83) ................. 27 

Grand Voyager (from 2000) ...................... 27 

Laser (thru 1986) ....................................... 27 

Le Baron (from 1982) ................................ 27 

LHS ............................................................... 26 

New Yorker (from 1994) ............................ 26 

PT Cruiser .................................................... 27 

Sebring ......................................................... 27 

Town & Country .......................................... 27 

Voyager (from 2001) .................................. 27 

22 

CHRYSLER CUV ............................................ 28 

Pacifica ......................................................... 28 

CHRYSLER (Canadian models) ............... 27 

Daytona ........................................................ 27 

Dynasty ........................................................ 27 

DAIHATSU ..................................................... 28 

Charade ........................................................ 28 

DODGE PASSENGER (FWD) ...................... 28 

024 ............................................................... 29 

400 ............................................................... 28 

600 ............................................................... 28 

Aries ............................................................. 28 

Avenger ........................................................ 28 

Caravan ........................................................ 30 

Charger (from 1983) .................................. 29 

Colt ................................................................ 28 

Colt Vista Wagon (thru 1991) ................... 28 

Daytona ........................................................ 28 

Dynasty ........................................................ 28 

Grand Caravan ............................................ 30 

Intrepid ......................................................... 29 

Lancer (from 1985) .................................... 28 

Mini Ram Van .............................................. 30 

Neon ............................................................. 29 

Omni ............................................................. 29 

Shadow ........................................................ 28 

Spirit ............................................................. 28 

Stealth .......................................................... 29 

Stratus.......................................................... 29 

DODGE (Canadian models) ....................... 30 

2000 GTX .................................................... 30 

Colt ................................................................ 30 

DODGE TRUCK ............................................. 30 

Dakota .......................................................... 30 

Raider ........................................................... 30 

Ram 50 ........................................................ 30 

EAGLE ............................................................ 30 

Summit ........................................................ 30 

Talon ............................................................. 31 

Vision ............................................................ 31 

EAGLE (Canadian models) ........................ 31 

2000 GTX .................................................... 31 

Vista .............................................................. 31 

FORD (FWD) ................................................. 31 

Aspire ........................................................... 31 

Contour ........................................................ 31 

Escort ........................................................... 32 

EXP ............................................................... 32 

Festiva .......................................................... 31 

Fiesta ............................................................ 32 

Focus ............................................................ 32 

Probe ............................................................ 32 

Taurus .......................................................... 32 

ZX2 ............................................................... 32 

FORD (RWD) ................................................. 33 

Fairmont ...................................................... 33 

Granada ....................................................... 33 

LTD (from 1983) ......................................... 33 

Mustang ....................................................... 33 

Mustang II .................................................... 33 

Pinto ............................................................. 33 

Thunderbird................................................. 33 

FORD CUV ..................................................... 33 

Escape .......................................................... 33 

FORD TRUCK ................................................ 33 

Courier ......................................................... 34 

Ranger .......................................................... 33 

GEO ................................................................. 34 

Metro (thru 1997) ...................................... 34 

Prizm (thru 1997) ...................................... 34 

GEO—(Cont.) 

Storm ........................................................... 34 

Tracker (thru 1997) .................................... 34 

HONDA ........................................................... 34 

Accord ........................................................... 34 

Civic .............................................................. 34 

CRX ............................................................... 34 

Del Sol .......................................................... 34 

Odyssey ........................................................ 34 

Prelude ......................................................... 34 

HONDA CUV .................................................. 35 

CR-V ............................................................. 35 

Pilot ............................................................... 35 

HONDA HYBRID ........................................... 35 

Accord ........................................................... 35 

HONDA TRUCK ............................................. 35 

Passport ....................................................... 35 

Ridgeline ...................................................... 35 

HYUNDAI ....................................................... 35 

Accent ........................................................... 35 

Elantra .......................................................... 35 

Excel ............................................................. 35 

Scoupe ......................................................... 35 

Sonata .......................................................... 35 

Tiburon ......................................................... 35 

XG300 .......................................................... 35 

XG350 .......................................................... 35 

HYUNDAI CUV .............................................. 36 

Sante Fe ....................................................... 36 

Tucson .......................................................... 36 

INFINITI (RWD) ............................................ 36 

J30 ................................................................ 36 

M30 .............................................................. 36 

INFINITI TRUCK ........................................... 36 

QX4 ............................................................... 36 

ISUZU ............................................................. 36 

I-Mark .......................................................... 36 

Stylus ............................................................ 36 

ISUZU TRUCK ............................................... 37 

Amigo ........................................................... 37 

Axiom ........................................................... 37 

Oasis ............................................................. 37 

Pickup ........................................................... 37 

Rodeo ........................................................... 37 

Trooper ......................................................... 37 

Trooper II ...................................................... 37 

Vehicross ...................................................... 37 

JEEP ............................................................... 37 

Liberty .......................................................... 37 

Wrangler ...................................................... 37 

KIA .................................................................. 37 

Amanti .......................................................... 37 

Magentis ...................................................... 37 

Optima.......................................................... 37 

Rio ................................................................. 37 

Sedona ......................................................... 37 

Sephia .......................................................... 37 

Sorento ........................................................ 37 

Spectra ......................................................... 37 

KIA CUV .......................................................... 37 

Sportage (from 2005) ............................... 37 

KIA TRUCK .................................................... 38 

Sportage (thru 2002) ................................ 38 

LEXUS (FWD) ............................................... 38 

ES250 .......................................................... 38 

ES300 .......................................................... 38 

ES330 .......................................................... 38 

LEXUS (RWD) ............................................... 38 

GS300 .......................................................... 38 

GS400 .......................................................... 38

Manufacturer to model index 

Manufacturer and model Page Manufacturer and model Page Manufacturer and model Page 

LEXUS (RWD)—(Cont.) 

GS430 .......................................................... 38 

IS300 ............................................................ 38 

LS400 .......................................................... 38 

LS430 .......................................................... 38 

SC300 .......................................................... 38 

SC400 .......................................................... 38 

SC430 .......................................................... 38 

LEXUS CUV ................................................... 38 

RX300 .......................................................... 38 

RX330 .......................................................... 38 

LEXUS HYBRID ............................................ 38 

RX400h ........................................................ 38 

LEXUS TRUCK .............................................. 39 

GX470 .......................................................... 39 

LX470 .......................................................... 39 

MAZDA (FWD) .............................................. 39 

323 ............................................................... 39 

626 ............................................................... 39 

Millenia ......................................................... 39 

MX-3 ............................................................ 39 

MX-6 ............................................................ 39 

Protege ......................................................... 39 

MAZDA (RWD) .............................................. 39 

929 ............................................................... 39 

MX-5 Miata ................................................. 39 

MAZDA CUV .................................................. 39 

Tribute .......................................................... 39 

MAZDA MPV ................................................. 39 

MAZDA TRUCK ............................................. 40 

B2000 .......................................................... 40 

B2200 .......................................................... 40 

B2300 .......................................................... 40 

B2500 .......................................................... 40 

MERCURY (FWD) ......................................... 40 

Capri (from 1991)....................................... 40 

Cougar (from 1999) ................................... 40 

LN-7 ............................................................. 40 

Lynx .............................................................. 40 

Mystique....................................................... 40 

Tracer............................................................ 40 

Villager ......................................................... 41 

MERCURY (RWD) ......................................... 41 

Bobcat .......................................................... 41 

Capri (thru 1986)........................................ 41 

Cougar .......................................................... 41 

Marquis (from 1983).................................. 41 

Zephyr .......................................................... 41 

MERKUR ........................................................ 41 

XR4Ti ............................................................ 41 

MITSUBISHI (FWD) ..................................... 42 

3000GT ........................................................ 42 

Cordia ........................................................... 42 

Diamante ..................................................... 42 

Eclipse .......................................................... 42 

Galant ........................................................... 42 

Lancer .......................................................... 42 

Mirage .......................................................... 42 

Precis ............................................................ 42 

Sigma ........................................................... 42 

Tredia ............................................................ 42 

MITSUBISHI CUV ......................................... 42 

Outlander ..................................................... 42 

MITSUBISHI EXPO ...................................... 42 

MITSUBISHI EXPO-LRV ............................. 42 

MITSUBISHI TRUCK ................................... 43 

Montero........................................................ 43 

Montero Sport ............................................. 43 

Pickup ........................................................... 43 

NISSAN PASSENGER (FWD) ..................... 43 

310 ............................................................... 43 

Maxima ........................................................ 43 

Pulsar ........................................................... 43 

Sentra .......................................................... 43 

Stanza .......................................................... 43 

NISSAN PASSENGER (RWD) ..................... 43 

200SX .......................................................... 43 

300ZX........................................................... 43 

NISSAN QUEST ............................................ 43 

NISSAN (Canadian models) ...................... 44 

Multi Wagon ................................................ 44 

NISSAN TRUCK ............................................ 44 

Frontier ........................................................ 44 

Pathfinder .................................................... 44 

Pickup ........................................................... 44 

Xterra ........................................................... 44 

OLDSMOBILE (FWD) .................................. 44 

Cutlass Supreme ......................................... 44 

Firenza.......................................................... 44 

PLYMOUTH (FWD) ...................................... 44 

Acclaim ......................................................... 44 

Breeze .......................................................... 44 

Caravelle (from 1985) ................................ 44 

Champ .......................................................... 45 

Colt Vista (from 1992)................................ 45 

Grand Voyager (2000-1984) .................... 45 

Horizon ......................................................... 44 

Laser (from 1990) ...................................... 45 

Neon ............................................................. 45 

Reliant .......................................................... 44 

Sundance ..................................................... 44 

TC3 ............................................................... 44 

Turismo ........................................................ 44 

Voyager (2000-1984)................................ 45 

Voyager (from 2001)(see Chrysler) .......... 27 

PONTIAC (FWD) ........................................... 45 

Grand Am ..................................................... 45 

Grand Prix .................................................... 45 

J2000 ........................................................... 45 

LeMans (from 1988) .................................. 46 

Sunbird (from 1982) .................................. 45 

PONTIAC (Canadian models) .................... 46 

Firefly ............................................................ 46 

Wave ............................................................. 46 

PORCHE ......................................................... 46 

924 ............................................................... 46 

SAAB .............................................................. 47 

9000 ............................................................. 47 

SATURN ......................................................... 47 

L Series ........................................................ 47 

LW ................................................................. 47 

SATURN CUV ................................................. 47 

Vue ................................................................ 47 

STERLING ..................................................... 47 

825 Series ................................................... 47 

827 Series ................................................... 47 

SUBARU ......................................................... 47 

DL ................................................................. 47 

GL.................................................................. 47 

GL-10 ........................................................... 47 

Impreza ........................................................ 47 

Justy ............................................................. 47 

Legacy .......................................................... 47 

Loyale ........................................................... 47 

RX ................................................................. 47 

XT .................................................................. 47 

SUBARU CUV ................................................ 47 

Forester ........................................................ 47 

SUZUKI .......................................................... 48 

Esteem ......................................................... 48 

Samurai ....................................................... 48 

Sidekick ........................................................ 48 

Swift ............................................................. 48 

Vitara ............................................................ 48 

X90 ............................................................... 48 

TOYOTA PASSENGER (FWD) ..................... 48 

Avalon ........................................................... 48 

Camry ........................................................... 48 

Celica (from 1986) ...................................... 48 

Corolla .......................................................... 48 

Paseo ............................................................ 48 

Solara ........................................................... 48 

Tercel ............................................................ 48 

TOYOTA PASSENGER (RWD) ..................... 48 

Cressida ........................................................ 48 

MR2 .............................................................. 48 

Supra ............................................................ 48 

TOYOTA CUV ................................................. 49 

Highlander ................................................... 49 

RAV4 ............................................................. 49 

TOYOTA SIENNA .......................................... 49 

TOYOTA TRUCK ............................................ 49 

4Runner ....................................................... 49 

Pickup ........................................................... 49 

Tacoma ......................................................... 49 

Tundra .......................................................... 49 

VOLKSWAGEN .............................................. 49 

Beetle ........................................................... 49 

Corrado ........................................................ 49 

Dasher .......................................................... 49 

Eos ................................................................ 49 

Fox ................................................................ 49 

GLI ................................................................ 49 

Golf ............................................................... 49 

GTI................................................................. 49 

Jetta .............................................................. 49 

Passat ........................................................... 49 

Phaeton ........................................................ 49 

Rabbit ........................................................... 49 

Rabbit Pickup .............................................. 49 

Scirocco ........................................................ 49 

Vanagon ....................................................... 49 

VOLKSWAGEN CUV ..................................... 50 

Touareg ........................................................ 50 

VOLVO ............................................................ 50 

240 Series ................................................... 50 

740 Series ................................................... 50 

760 Series ................................................... 50 

780 Series ................................................... 50 

850 Series ................................................... 50 

940 Series ................................................... 50 

960 Series ................................................... 50 

C70 ............................................................... 50 

DL ................................................................. 50 

GL.................................................................. 50 

GLT ................................................................ 50 

S40 ............................................................... 50 

S60 ............................................................... 50 

S70 ............................................................... 50 

S80 ............................................................... 50 

S90 ............................................................... 50 

V40 ............................................................... 50 

V70 ............................................................... 50 

V90 ............................................................... 50 

VOLVO CUV ................................................... 50 

XC70 ............................................................. 50 

XC90 ............................................................. 50 

23

Passenger cars, light & medium trucks 

Acura Integra, Legend, RL, TL, Vigor, 2.2CL, 2.3CL, 2.5TL, 3.0CL, 3.2CL, 3.2TL, 

3.5RL 

MFG./YEAR MODEL & LOCATION PART NO. MFG./YEAR MODEL & LOCATION PART NO. 

Engine 


2007 RL w/3.5L Eng.: 

Belt, Tensioner & Water Pump Kit ................... � TBK329WP 

2007 TL w/3.2L & 3.5L Engs.: 


2006-2005 3.5RL w/3.5L Eng.: 


2006-2004 3.2TL w/3.2L Eng.: 


2004-1996 3.5RL w/3.5L Eng.: 

Belt & Tensioner Kit w/Seals ................................ � TBK279P 

2002-1999 3.2CL & 3.2TL w/3.2L Eng.: 


2001-1994 Integra w/1.8L Eng. Exc. V-TEC: 


2001-1994 Integra w/1.8L V-TEC Eng.: 


1999-1997 2.2CL & 2.3CL w/2.2L & 2.3L Engs.: 


1999-1997 3.0CL w/3.0L Eng.: 


1998-1996 3.2TL w/3.2L Eng.: 


Acura CUV MDX, SLX 

Engine 


2007-2003 MDX w/3.5L Eng.: 


2002-2001 MDX w/3.5L Eng.: 


1999-1998 SLX w/3.5L Eng.: 


1997-1996 SLX w/3.2L Eng.: 


American Motors Concord, Gremlin, Spirit 

Engine 


1979-1977 Concord, Gremlin & Spirit w/2.0L Eng.: 




1998-1995 2.5TL w/2.5L Eng.: 


1995-1991 Legend w/3.2L Eng.: 


1994-1992 Vigor w/2.5L Eng.: 

Belt, Tensioner & Water Pump Kit ................. � TBK211AWP 

1993-1992 Integra w/1.7L Eng.: 


1993-1990 Integra w/1.8L Eng.: 


1990-1987 Legend w/2.7L Eng.: 


1989-1986 Integra w/1.6L Eng.: 


1987-1986 Legend w/2.5L Eng.: 


Audi A3, A4, A6, A8, Cabriolet, Fox, RS6, S6, S8, 80, 90, 100, 200, 4000, 4000S 

Engine 


2009-2006 A3 w/2.0L Turbo Eng.: 

Belt & Tensioner Kit w/Seals .................................... TBK334P 

2008-2005 A4 Quattro w/2.0L Turbo Eng.: 


2005-2001 A8 Quattro w/4.2L Eng.: 

Belt, Tensioner & Water Pump Kit ................. � TBK297BWP 

2004-2003 RS6 w/Turbo Eng.: 


2004-2001 A6 Quattro w/4.2L Eng.: 


2003-2001 S6 Quattro & S8 w/4.2L Eng.: 


24 

� Interference engine for most applications. 

*See pages 17-20 for important installation information. 



2000-1997 A4 w/1.8L Turbo Eng.: 


1998-1995 Cabriolet w/2.8L Eng.: 


1997-1996 A6 w/2.8L Eng.: 


1996 A4 w/2.8L Eng.: 


1995-1992 90, 100, A6 & Cabriolet w/2.8L Eng.: 


1991-1989 90, 100 & 200 w/2.2L & 2.3L Engs.: 

Belt, Tensioner & Water Pump Kit ....................... TBK170WP 

(Continued)


(Cont.) -- Audi A3, A4, A6, A8, Cabriolet, Fox, RS6, S6, S8, 80, 90, 100, 200, 4000, 

4000S 




1990-1988 80 & 90 w/2.0L Eng.: 


1987-1984 4000S w/1.8L Eng.: 


1983-1982 4000 w/1.6L Diesel Eng.: 


1983-1981 4000 w/1.7L Eng.: 


Engine 


1993-1988 3 Series & 525i w/2.5L & 2.7L Engs.: 


Engine 


1988-1987 Skyhawk w/2.0L Eng.: 

Belt, Tensioner & Water Pump Kit ..................... TBK081AWP 

1986-1982 Skyhawk w/1.8L Eng.: 


Engine 


2001-1999 Catera w/3.0L Eng.: 

Belt & Tensioner Kit w/Seals ............................. � TBK285AP* 

1998-1997 Catera w/3.0L Eng.: 

Belt & Tensioner Kit w/Seals ................................ � TBK285P* 

Engine 


2008 Aveo5 w/1.6L Eng.: 


2008-2004 Aveo w/1.6L Eng.: 


Engine 


1997-1996 Lumina & Monte Carlo w/3.4L Eng.: 


1995-1991 Lumina & Monte Carlo w/3.4L Eng.: 




1979-1975 Fox w/1.6L Eng.: 




BMW 325i, 325ic, 325iS, 325iX, 525i 

Buick (FWD) Skyhawk (from 1982) 

Cadillac (RWD) Catera 

Chevrolet (FWD) Aveo, Aveo5 

Chevrolet (FWD) Lumina, Monte Carlo 

25

Chevrolet (FWD) Metro (from 1998) 



Engine 


2001-1998 Metro w/1.0L & 1.3L Engs.: 

Belt & Tensioner Kit w/Seals ............................. � TBK194AP 

Chevrolet (FWD) Nova (1988-85) 

Engine 


1988-1985 Nova w/1.6L Eng.: 


Chevrolet (FWD) Spectrum 

Engine 


1988-1985 Spectrum w/1.5L Eng.: 


Chevrolet/GMC Truck Tracker (from 1998) 

Engine 


2002-1998 Tracker w/1.6L Eng.: 


Chrysler (FWD) Cirrus 

Engine 


2000 Cirrus w/2.0L Eng.: 

Belt, Mech. Tens. & Water Pump Kit ............. � TBK245AWP* 

Belt, Hyd. Tens. & Water Pump Kit ............... � TBK245BWP* 

2000 Cirrus w/2.4L Eng.: 

Belt, Hyd. Tens. & Water Pump Kit .................... TBK265AWP* 

Belt, Mech. Tens. & Water Pump Kit ................. TBK265BWP* 

2000-1995 Cirrus w/2.5L Eng.: 


Chrysler (FWD) Concorde, LHS, New Yorker (from 1994), 300M 

Engine 


2008-2005 300M w/3.5L Eng.: 


2002-1998 300M, Concord & LHS w/3.2L & 3.5L Eng.: 


1997-1995 Concorde, LHS & New Yorker w/3.5L Eng.: 


1994-1993 Concorde, LHS & New Yorker w/3.5L Eng.: 


26 





1996-1995 Cirrus w/2.4L Eng.: 

Belt, Tensioner & Water Pump Kit ....................... TBK265WP*


Chrysler (FWD) E Class/New Yorker (1993-83), Laser (thru 1986), LeBaron (from 

1982) 


Engine 


1995-1988 LeBaron & New Yorker w/3.0L Eng.: 


1994-1989 LeBaron w/2.2L & 2.5L Engs.: 


1988 LeBaron w/2.5L Eng.: 


1988-1982 E Class, Laser, LeBaron & New Yorker w/2.2L 

Eng.: 


Engine 


2006-2001 PT Cruiser w/2.4L Eng.: 



Engine 


2009-2007 Sebring w/3.5L Eng.: 


2006-2001 Sebring w/2.4L Eng.: 

Belt & Tensioner Kit w/Water Pump ................... TBK265AWP* 

2005-2003 Sebring w/3.0L Eng.: 


2002-2001 Sebring w/3.0L Eng.: 


2000-1995 Sebring w/2.5L Eng.: 


1998-1997 Sebring w/2.4L Eng.: 

Belt, Tensioner & Water Pump Kit ..................... TBK265BWP* 

Engine 


2009-2008 Town & Country w/4.0L Eng.: 

Belt & Tensioner Kit w/Water Pump .............. � TBK295AWP 

2003-2001 Voyager w/2.4L Eng.: 

Belt & Hydraulic Tens. Kit w/Pump .................... TBK265AWP* 

Belt & Mechanical Tens. Kit w/Pump ................ TBK265BWP* 

Engine 


1993-1989 Daytona & Dynasty w/2.2L & 2.5L Eng.: 


1993-1988 Daytona & Dynasty w/3.0L Eng.: 




1987-1986 Laser, LeBaron & New Yorker w/2.5L Eng.: 


Chrysler (FWD) PT Cruiser 

Chrysler (FWD) Sebring 



1997-1995 Sebring w/2.0L Eng.: 


1996 Sebring w/2.4L Eng.: 

Belt, Tensioner & Water Pump Kit ....................... TBK265WP* 

Chrysler (FWD) Town & Country, Voyager (from 2001) 

Chrysler (Canadian Models) Daytona, Dynasty 



27

Chrysler CUV Pacifica 



Engine 


2008-2005 Pacifica w/3.5L & 4.0L Engs.: 


Daihatsu Charade 

Engine 


1992-1988 Charade w/1.0L Eng.: 


Dodge (FWD) Avenger 

Engine 


2000-1995 Avenger w/2.5L Eng.: 


1997-1995 Avenger w/2.0L Eng.: 


Dodge (FWD) Aries, Daytona, Dynasty, Lancer (from 1985), Shadow, Spirit, 400, 

600 

Engine 


1995-1989 Daytona, Dynasty, Lancer, Shadow & Spirit 

w/2.2L & 2.5L Eng.: 


1995-1988 Daytona, Dynasty, Shadow & Spirit w/3.0L 

Eng.: 


1988-1981 Aries, Daytona, Lancer, Shadow, 400 & 600 

w/2.2L Eng.: 




1987-1986 Aries, Daytona, Lancer & 600 w/2.5L Eng.: 


Dodge (FWD) Colt (from 1980), Colt Vista (thru 1991), For (1992) Colt Vista See 

Plymouth 

Engine 


1994-1991 Colt w/1.5L Eng.: 


1991-1987 Colt Vista w/2.0L Eng.: 


1990-1987 Colt w/1.5L Eng.: 


1986-1980 Colt w/1.4L & 1.5L Engs.: 


28 


*See pages 17-20 for important installation information.


Dodge (FWD) Charger (from 1983), Omni, 024 


Engine 


1990-1989 Omni w/2.2L Eng.: 


1988-1981 Charger & Omni w/2.2L Eng.: 


1983-1980 Charger, Omni & 024 w/1.7L Eng.: 


Engine 


2002-1998 Intrepid w/3.2L & 3.5L Engs.: 


1997-1995 Intrepid w/3.5L Eng.: 


1994-1993 Intrepid w/3.5L Eng.: 


Engine 


2002-1998 Neon w/2.0L Eng.: 



1997-1995 Neon w/2.0L SOHC Eng.: 

Belt, Tensioner & Water Pump Kit ................... � TBK245WP* 

1997-1995 Neon w/2.0L DOHC Eng.: 


Engine 


1996-1994 Stealth w/3.0L DOHC Eng.: 


1996-1991 Stealth w/3.0L SOHC Eng.: 


Engine 


2006-1997 Stratus w/2.4L Eng.: 



2004-2001 Stratus w/3.0L Eng.: 


2000-1999 Stratus w/2.0L Eng.: 



2000-1995 Stratus w/2.5L Eng.: 


1998-1995 Stratus w/2.0L Eng.: 


1996-1995 Stratus w/2.4L Eng.: 




Dodge (FWD) Intrepid 

Dodge (FWD) Neon 

Dodge (FWD) Stealth 

Dodge (FWD) Stratus 

29

Dodge (FWD) Caravan, Grand Caravan, Mini Ram Van 



Engine 


2007-1997 Caravan & Grand Caravan w/2.4L Eng.: 





1996 Caravan & Grand Caravan w/2.4L Eng.: 




1988 Caravan, Grand Caravan & Mini Ram Van 

w/2.5L Eng.: 


Dodge (Canadian Models) Colt, 2000 GTX 

Engine 


1995 Colt w/1.5L Eng.: 


1991 Colt w/1.5L Eng.: 


1990-1989 2000 GTX w/2.0L SOHC Eng.: 


Dodge Truck Raider, Ram 50 

Engine 


1991-1990 Ram 50 w/3.0L Eng.: 


1989 Raider w/3.0L Eng.: 


1989-1987 Ram 50 w/2.0L Eng.: 


Dodge Truck Dakota 

Engine 


1995-1989 Dakota w/2.5L Eng.: 


1988-1987 Dakota w/2.2L Eng.: 


Eagle Summit 

Engine 


1996 Summit w/2.4L Eng.: 


1996-1991 Summit w/1.5L Eng.: 


1995-1993 Summit w/2.4L Eng.: 


1992 Summit w/2.4L Eng.: 


1990-1989 Summit w/1.5L Eng.: 


30 





1988-1987 Mini Ram Van w/3.0L Eng.: 


1987-1984 Caravan & Mini Ram Van w/2.2L Eng.: 

Belt & Tensioner Kit w/Seals .................................... TBK071P


Eagle Talon 


Engine 


1997-1995 Talon w/2.0L Eng. w/o Turbo: 


1994-1993 Talon w/1.8L Eng.: 


1994-1990 Talon w/2.0L Eng.: 


Engine 


1997-1995 Vision w/3.5L Eng.: 


1994-1993 Vision w/3.5L Eng.: 


Engine 


1993-1991 2000 GTX w/2.0L DOHC Eng.: 


1992 Vista w/1.5L Eng.: 


1992-1991 2000 GTX w/2.0L SOHC Eng.: 


1991-1989 Vista w/1.5L Eng.: 


Engine 


1997-1990 Aspire & Festiva w/1.3L Eng.: 


Engine 


2000-1999 Contour w/2.0L DOHC Eng. From 2/10/99: 

Belt, Tensioner & Water Pump Kit ................. � TBK294AWP* 

1999-1998 Contour w/2.0L DOHC Eng. Thru 2/9/99: 


1997-1995 Contour w/2.0L Eng.: 


Eagle Vision 

Eagle (Canadian Models) Vista, 2000 GTX 



Ford (FWD) Aspire, Festiva 

Ford (FWD) Contour 

31

Ford (FWD) Escort, EXP, ZX2 



Engine 


2002-2000 Escort & ZX2 w/2.0L DOHC Eng.: 


2002-1997 Escort w/2.0L SOHC Eng.: 


1999 Escort w/2.0L DOHC Eng. From 2/9/99: 

1999-1998 Escort w/2.0L DOHC Eng. Thru 2/9/99: 


1996-1991 Escort w/1.8L Eng.: 


1996-1992 Escort w/1.9L Eng.: 


Ford (FWD) Fiesta 

Engine 


1989-1988 Fiesta w/1.3L Eng.: 


Ford (FWD) Focus 

Engine 


2004-2001 Focus w/2.0L DOHC Eng. & 1 Idler: 

Belt, Tensioner & Water Pump Kit ................. � TBK294BWP* 

2004-2000 Focus w/2.0L SOHC Eng.: 


Ford (FWD) Probe 

Engine 


1997-1993 Probe w/2.0L Eng.: 


1997-1993 Probe w/2.5L Eng.: 


1992-1989 Probe w/2.2L Eng.: 


Ford (FWD) Taurus 

Engine 


1995-1989 Taurus w/3.0L Y Eng.: 


32 

Belt, Tensioner & Water Pump Kit � TBK294AWP * 





1991 Escort w/1.9L Eng. & Round Tooth Sprocket: 


1991 Escort w/1.9L Eng. & Square Tooth Sprocket: 


1990-1986 Escort w/1.9L Eng.: 

Belt, Tensioner & Water Pump Kit ................. � TBK067WP 

1988-1986 EXP w/1.9L Eng.: 


1985 Escort w/1.9L Eng.: 


1985-1981 Escort & EXP w/1.6L Eng.: 




2002-2000 Focus w/2.0L DOHC Eng. & 2 Idlers: 

Belt, Tensioner & Water Pump Kit ................. � TBK294AWP*


Ford (RWD) Fairmont 


Engine 


1983-1978 Fairmont w/2.3L Eng.: 


Engine 


1986-1981 Granada & LTD w/2.3L Eng.: 


Engine 


1993 Mustang w/2.3L Eng.: 


1992-1974 Mustang & Mustang II w/2.3L Eng.: 


Engine 


1980-1974 Pinto w/2.3L Eng.: 


Engine 


1988-1983 Thunderbird w/2.3L Eng.: 


Engine 


2004-2001 Escape w/2.0L DOHC Eng.: 

Belt, Tensioner & Water Pump Kit...................... �TBK294BWP* 

Engine 


2001-1998 Ranger w/2.5L Eng.: 


1997-1995 Ranger w/2.3L Eng.: 


1994-1993 Ranger w/2.3L Eng.: 


1992 Ranger w/2.3L Eng. & Round Tooth Sprocket: 




Ford (RWD) Granada, LTD (from 1983) 

Ford (RWD) Mustang, Mustang II 

Ford (RWD) Pinto 

Ford (RWD) Thunderbird 

Ford (CUV) Escape 

Ford Truck Ranger 



1992-1983 Ranger w/2.3L Eng. & Square Tooth Sprocket: 


1988-1983 Ranger w/2.0L Eng.: 


33

Ford Truck Courier 



Engine 


1982-1977 Courier w/2.3L Eng.: 


Geo Metro (thru 1997), Prizm (thru 1997), Storm 

Engine 


1997-1996 Metro w/1.0L Eng.: 


1997-1995 Metro w/1.3L Eng.: 


1997-1993 Prizm w/1.8L Eng.: 


1997-1993 Prizm w/1.6L Eng.: 


1995-1994 Metro w/1.0L Eng.: 


1993-1990 Storm w/1.6L Eng.: 




1993-1989 Metro w/1.0L Eng.: 


1992-1989 Prizm w/1.6L Eng. Exc. GSI: 


Geo Tracker (thru 1997), (from 1998) See-Chevrolet/GMC Truck 

Engine 


1997-1994 Tracker w/1.6L 16 Valve Eng.: 


Honda Accord, Civic, Civic CRX, Del Sol, Odyssey, Prelude 

Engine 


2007-2003 Accord w/3.0L Eng.: 


2006-2005 Odyssey w/3.5L Eng.: 


2002-1999 Odyssey w/3.5L Eng.: 


2002-1998 Accord w/2.3L Eng.: 


2002-1998 Accord w/3.0L Eng.: 


2000-1999 Civic w/1.6L SOHC Eng.: 


1999-1993 Prelude w/2.2L V-TEC Eng.: 


1998 Odyssey w/2.3L Eng.: 


1998-1994 Civic & Del Sol w/1.6L SOHC Eng.: 


1997-1995 Odyssey w/2.2 L Eng.: 


1997-1995 Accord w/2.7L Eng.: 


1997-1994 Del Sol w/1.6L DOHC Eng.: 


1997-1994 Accord w/2.2L V-TEC Eng.: 


1997-1990 Accord w/2.2L Eng. w/o V-TEC Exc. EX: 


34 





1996-1993 Prelude w/2.2L Eng. w/o V-TEC: 


1996-1992 Prelude w/2.3L Eng.: 


1995 Civic CX & DX w/1.5L Eng.: 


1995-1993 Del Sol w/1.5L SOHC Eng.: 


1995-1992 Civic VX w/1.5L Eng.: 


1994-1992 Civic w/1.5L Eng. Exc. VX: 


1993 Del Sol w/1.6L Eng.: 


1992 Civic w/1.6L Eng. Exc. Si: 


1992 Civic Si w/1.6L Eng.: 


1991-1990 Prelude w/2.1L Eng.: 


1991-1988 Civic & CRX w/1.5L Eng.: 


1991-1988 Prelude w/2.0L DOHC Eng.: 


1991-1988 Civic w/1.6L Eng. Exc. Si: 


1990-1988 Prelude w/2.0L SOHC Eng.: 


(Continued)


(Cont.) -- Honda Accord, Civic, Civic CRX, Del Sol, Odyssey, Prelude 




1989-1986 Accord w/2.0L Eng.: 


1987-1986 Civic w/1.3L & 1.5L Eng.: 


1987-1985 Prelude w/2.0L Eng.: 


1987-1983 Prelude w/1.8L Eng.: 


1985-1984 Accord w/1.6L & 1.8L Engs.: 


Engine 


2007-2005 Accord w/3.0L Eng.: 

Belt, Hyd. Tens. & Water Pump Kit .................. � TBK329WP 

Engine 


2006-2005 Pilot w/3.5L Eng.: 


2004-2003 Pilot w/3.5L Eng.: 


2000-1997 CR-V w/2.0L Eng.: 


Engine 


2006 Ridgeline w/3.5L Eng.: 










1979-1976 Civic w/1.5L Eng.: 


1978-1976 Accord w/1.6L Eng.: 


Honda Hybrid Accord 

Honda CUV CR-V, Pilot 

Honda Truck Passport, Ridgeline 

Hyundai Accent, Elantra, Excel, Scoupe, Sonata, Tiburon, XG300, XG350 

Engine 


2006-2003 Tiburon w/2.7L Eng.: 


2005-2002 XG350 w/3.5L Eng.: 


2005-2001 Sonata w/2.4L Eng.: 


2005-1999 Sonata w/2.5L & 2.7L Eng.: 


2002-2000 Accent w/1.5L SOHC Eng.: 


2001 XG300 w/3.0L Eng.: 






2001-1998 Elantra & Tiburon w/2.0L Eng.: 


1999-1995 Accent w/1.5L SOHC Eng.: 


1998-1996 Elantra & Tiburon w/1.8L Eng.: 


1998-1992 Sonata w/2.0L Eng.: 


1998-1990 Sonata w/3.0L Eng.: 


1997-1996 Accent w/1.5L DOHC Eng.: 


(Continued) 

35


Hyundai Accent, Elantra, Excel, Scoupe, Sonata, Tiburon, XG300, XG350 -- (Cont.) 




1995-1994 Scoupe w/1.5L Eng.: 


1995-1993 Elantra w/1.6L Eng.: 


1994-1993 Elantra w/1.8L Eng.: 


1994-1990 Excel w/1.5L Eng.: 


1993-1991 Scoupe w/1.5L Eng.: 


1992 Elantra w/1.6L Eng.: 


Hyundai CUV Sante Fe, Tucson 

Engine 


2007-2005 Tucson w/2.7L Eng.: 


2006-2003 Santa Fe w/3.5L Eng.: 


2006-2001 Santa Fe w/2.7L Eng.: 


2005-2001 Santa Fe w/2.4L Eng.: 


Infiniti (RWD) J30, M30 

Engine 


1997-1994 J30 w/3.0L Eng.: 


1992-1990 M30 w/3.0L Eng.: 


Infiniti Truck QX4 

Engine 


2000-1997 QX4 w/3.3L Eng.: 


Isuzu I-Mark, Stylus 

Engine 


1993-1991 Stylus w/1.6L Eng.: 


1989-1985 I-Mark w/1.5L Eng.: 


36 





1991-1989 Sonata w/2.4L Eng.: 


1989-1986 Excel w/1.5L Eng.: 

Belt & Tensioner Kit w/Seals ................................ � TBK073P


Isuzu Truck Amigo, Axiom, Oasis, Pickup, Rodeo, Trooper, Trooper II, Vehicross 


Engine 


2003-1998 Amigo, Axiom, Rodeo, Trooper & Vehicross 

w/3.2L & 3.5L Engs.: 


1999-1998 Oasis w/2.3L Eng.: 


1997-1996 Oasis w/2.2L Eng.: 


1997-1993 Rodeo w/3.2L Eng.: 


1997-1992 Trooper w/3.2L SOHC Eng.: 


1997-1991 Rodeo w/2.6L Eng.: 


1995-1992 Trooper w/3.2L DOHC Eng.: 


Engine 


2006-2003 Wrangler w/2.4L Eng.: 

Belt, Tensioner & Water Pump Kit ..................... TBK265AWP* 

Engine 


2005-2002 Liberty w/2.4L Eng.: 





1995-1988 Pickup & Amigo w/2.6L Eng.: 


1995-1986 Pickup w/2.3L Eng.: 


1993-1989 Amigo w/2.3L Eng.: 


1991-1988 Trooper & Trooper II w/2.6L Eng.: 


1987-1986 Trooper w/2.3L Eng.: 


Jeep Wrangler 

Jeep Liberty 

Kia Amanti, Magentis, Optima, Rio, Sedona, Sephia, Sorento, Spectra 

Engine 


2006-2004 Amanti, Sedona & Sorento w/3.5L Eng.: 


2005-2001 Magentis & Optima w/2.5L & 2.7L Engs.: 


2005-2001 Rio w/1.5L Eng.: 


2004-2000 Spectra w/1.8L Eng.: 


1997-1995 Sephia w/1.6L & 1.8L DOHC Engs.: 


Engine 


2007-2005 Sportage w/2.7L Eng.: 






1995-1994 Sephia w/1.6L SOHC Eng.: 


Kia CUV Sportage (from 2005) 

37

Kia Truck Sportage 



Engine 


1999-1995 Sportage w/2.0L DOHC Eng.: 

Belt & Tensioner Kit w/Seals ............................ � TBK281WP 

1995 Sportage w/2.0L SOHC Eng.: 


Lexus (FWD) ES250, ES300, ES330 

Engine 


2006-2004 ES330 w/3.3L Eng.: 


2003-2002 ES300 w/3.0L Eng.: 


2001-1994 ES300 w/3.0L Eng.: 


1993-1992 ES300 w/3.0L Eng.: 




1991-1990 ES250 w/2.5L Eng.: 


Lexus (RWD) GS300, GS400, GS430, IS300, LS400, LS430, SC300, SC400, SC430,, S 

Engine 


2007-2004 SC430 w/4.3L Eng.: 


2007-2001 GS430 w/4.3L Eng.: 


2006-2001 LS430 w/4.3L Eng.: 


2004-2001 IS300 w/3.0L Eng.: 


2004-1993 GS300 w/3.0L Eng.: 


2000-1998 GS400, LS400 & SC400 w/4.0L Eng.: 


Lexus Hybrid RX400h 

Engine 


2008-2006 RX400h w/3.3L Eng.: 


Lexus CUV RX300, RX330 

Engine 


2006-2004 RX330 w/3.3L Eng.: 


2001-1999 RX300 w/3.0L Eng.: 


38 





2000-1992 SC300 w/3.0L Eng.: 


1997-1990 LS400 & SC400 w/4.0L Eng.: 



Lexus Truck GX470, LX470 


Engine 


2007-1998 GX470 & LX470 w/4.7L Eng.: 


Mazda Passenger (FWD), Millenia, MX-3, MX-6, Protege, 323, 626 

Engine 


2002-2001 Protege w/2.0L Eng.: 


2002-1995 Millenia w/2.5L Eng.: 


2002-1995 Millenia w/2.3L Eng.: 


2002-1993 MX6 & 626 w/2.0L Eng.: 


2002-1993 MX6 & 626 w/2.5 L Eng.: 


2001-1999 Protege w/1.6L Eng.: 


2000-1999 Protege w/1.8L Eng.: 


1998-1995 Protege w/1.5L SOHC Eng.: 


1998-1995 Protege w/1.5L DOHC Eng.: 


1998-1990 Protege w/1.8L DOHC Eng.: 


Engine 


2002-1990 MX-5 Miata w/1.6L & 1.8L Engs.: 


1995-1992 929 w/3.0L Eng.: 


1991-1990 929 w/3.0L DOHC Eng.: 


1991-1988 929 w/3.0L SOHC Eng.: 


Engine 


1998-1989 MPV w/3.0L Eng.: 


Engine 


2004-2001 Tribute w/2.0L DOHC Eng.: 

Belt, Tensioner & Water Pump Kit ................. � TBK294BWP* 



1995-1994 MX-3 w/1.6L DOHC Eng.: 


1994-1990 323 w/1.6L & 1.8L Eng.: 


1994-1990 Protege w/1.8L SOHC Eng.: 


1993-1992 MX-3 w/1.6L Eng.: 


1992-1988 626 & MX-6 w/2.2L Eng.: 


1989-1987 323 w/1.6L Eng.: 


1987-1986 626 w/2.0L Eng.: 


Mazda Passenger (RWD), MX-5 Miata, 929 



Mazda MPV 

Mazda CUV Tribute 

39

Mazda Truck B2000, B2200, B2300, B2500 



Engine 


2000-1995 B2300 & B2500 w/2.3L & 2.5L Engs.: 


1994 B2300 w/2.3L Eng.: 


1993-1987 B2200 w/2.2L Eng.: 


1987-1986 B2000 w/2.0L Eng.: 


Mercury (FWD) Capri (from 1991) 

Engine 


1994-1991 Capri w/1.6L Eng.: 


Mercury (FWD) Cougar (from 1999) 

Engine 


2002-1999 Cougar w/2.0L Eng. & 60mm O.D. Upper Idler: 


1999 Cougar w/2.0L Eng. & 70mm O.D. Upper Idler: 


Mercury (FWD) LN-7, Lynx 

Engine 


1987-1985 Lynx w/1.9L Eng.: 

Belt, Tensioner & Water Pump Kit ................. � TBK067WP 

1985-1981 LN-7 & Lynx w/1.6L Eng.: 


Mercury (FWD) Mystique 

Engine 


1999-1998 Mystique w/2.0L Eng.: 


1997-1995 Mystique w/2.0L Eng.: 


Mercury (FWD) Tracer 

Engine 


1999-1997 Tracer w/2.0L Eng.: 


1996-1992 Tracer w/1.9L Eng.: 


1996-1991 Tracer w/1.8L Eng.: 


1991 Tracer w/1.9L Eng.: 


1990-1987 Tracer w/1.6L Eng.: 


40 


*See pages 17-20 for important installation information.


Mercury (FWD) Villager 


Engine 


1998-1993 Villager w/3.0L Eng. & Round Tooth Sprocket: 


1993 Villager w/3.0L Eng. & Square Tooth 

Sprocket: 


Engine 


1980-1975 Bobcat w/2.3L Eng.: 


Engine 


1986-1976 Capri w/2.3L Eng.: 


Engine 


1983-1978 Zephyr w/2.3L Eng.: 


Engine 


1986-1981 Cougar w/2.3L Eng.: 


Engine 


1986-1983 Marquis w/2.3L Eng.: 


Engine 


1989-1985 XR4Ti w/2.3L Eng. & Square Tooth Sprocket: 




Mercury (RWD) Bobcat 

Mercury (RWD) Capri (thru 1986) 

Mercury (RWD) Zephyr 

Mercury (RWD) Cougar 

Mercury (RWD) Marquis (from 1983) 

Merkur XR4Ti 

41


Mitsubishi Passenger (FWD), 3000GT, Cordia, Diamante, Eclipse, Galant, Galant 

Sigma, Lancer, Mirage, Precis, Tredia 


Engine 


2007-2006 Eclipse w/2.4L Eng.: 


2006-2004 Galant w/2.4L Eng.: 


2006-2004 Lancer w/2.4L Eng.: 


2006-2002 Lancer w/2.0L Eng.: 


2004-2003 Eclipse w/3.0L Eng.: 


2002-1999 Galant w/3.0L Eng.: 


2002-1997 Diamante w/3.5L Eng.: 


2002-1997 Mirage w/1.8L Eng.: 


2001-2000 Eclipse w/3.0L Eng.: 


1999-1997 Mirage w/1.5L Eng.: 


1999-1996 Eclipse w/2.4L Eng.: 


1999-1995 Eclipse w/2.0L DOHC Eng. w/o Turbo: 


1999-1995 Eclipse & Galant w/2.0L Turbo Eng.: 


1999-1991 3000GT w/3.0L Eng.: 


1998-1996 Galant w/2.4L Eng.: 


1996-1993 Mirage w/1.8L Eng.: 


1996-1991 Mirage w/1.5L Eng.: 


1995-1994 Galant w/2.4L Eng. From 6/1/94: 


Mitsubishi Expo, Expo-LRV 

Engine 


1995-1993 Expo & Expo LRV w/2.4L Eng.: 


1994-1992 Expo LRV w/1.8L Eng.: 


1992 Expo & Expo LRV w/2.4L Eng.: 


Mitsubishi CUV Outlander 

Engine 


2006-2004 Outlander w/2.4L Eng.: 


42 





1995-1992 Diamante w/3.0L DOHC Eng.: 


1994 Galant w/2.4L Eng. Thru 5/31/94: 


1994-1990 Eclipse w/2.0L Eng. w/o Turbo: 


1993 Galant w/2.0L DOHC Eng.: 


1993-1990 Eclipse w/1.8L Eng.: 


1993-1990 Precis w/1.5L Eng.: 


1992-1989 Galant w/2.0L SOHC Eng.: 


1992-1989 Galant w/2.0L DOHC Eng.: 


1990-1988 Sigma w/3.0L Eng.: 


1990-1987 Mirage w/1.5L Eng.: 


1989-1987 Precis w/1.5L Eng.: 


1988 Galant w/3.0L Eng.: 


1988-1987 Cordia w/1.8L Eng.: 


1988-1983 Tredia w/1.8L & 2.0L Engs.: 


1987-1985 Galant w/2.4L Eng.: 


1986-1985 Mirage w/1.5L Eng.: 



Mitsubishi Truck Montero, Montero Sport, Pickup 


Engine 


2002-2001 Montero XLS w/3.5L Eng.: 


2002-1997 Montero & Montero Sport w/3.5L Eng. Exc. 

XLS: 


2001-1997 Montero Sport w/3.0L Eng.: 


1999-1997 Montero Sport w/2.4L Eng.: 


1996-1995 Montero w/3.0L Eng.: 


1996-1993 Pickup w/2.4L Eng.: 




1994-1990 Pickup w/3.0L Eng.: 


1994-1989 Montero w/3.0L Eng.: 


1989-1987 Pickup w/2.0L Eng.: 


Nissan Passenger (FWD), Maxima (from 1985), Pulsar, Sentra, Stanza, 310 

Engine 


1994-1993 Maxima w/3.0L Eng. & Round Tooth Sprocket: 


1994-1993 Maxima w/3.0L Eng. & Square Tooth 

Sprocket: 


1992 Maxima w/3.0L DOHC Eng.: 


1991-1985 Maxima w/3.0L Eng.: 


1989-1982 Stanza w/2.0L Eng.: 


Engine 


1996-1990 300ZX w/3.0L Eng.: 


1989-1984 300ZX w/3.0L Eng.: 


1988 200SX w/2.0L Eng.: 


Engine 


2001-1995 Quest w/3.0L & 3.3L Engs.: 


1994-1993 Quest w/3.0L Eng. & Square Tooth Sprocket: 


1994-1993 Quest w/3.0L Eng. & Round Tooth Sprocket: 






1988-1982 Pulsar & Sentra w/1.6L Eng.: 


1982 310 w/1.5L Eng.: 


Nissan Passenger (RWD), 200SX, 300ZX 



1987-1984 200SX w/2.0L Eng.: 

Belt, Tens. & Seal Kit (78mm Belt) .................... � TBK078AP 

Belt, Tens. & Seal Kit (100mm Belt) ........................ TBK100P 

Nissan Quest 

43

Nissan (Canadian Models) Multi Wagon 



Engine 


1988-1986 Multi Wgn. w/2.0L Eng.: 


Nissan Truck Hardbody Pickup, Frontier, Pathfinder, Xterra 

Engine 


2001-2000 Xterra w/3.3L Eng.: 


2000-1999 Frontier w/3.3L Eng.: 


1994-1993 Pathfinder & Pickup w/3.0L Eng. & Round 

Tooth Sprocket: 


1994-1993 Pathfinder & Pickup w/3.0L Eng. & Square 

Tooth Sprocket: 


Oldsmobile (FWD) Cutlass Supreme, Firenza 

Engine 


1996 Cutlass Supreme w/3.4L Eng.: 


1995-1991 Cutlass Supreme w/3.4L Eng.: 


1986-1982 Firenza w/1.8L Eng.: 




1992-1987 Pathfinder & Pickup w/3.0L Eng.: 


Plymouth (FWD) Acclaim, Caravelle (from 1985), Horizon, Reliant, Sundance, TC3, 

Turismo 

Engine 


1995-1989 Acclaim & Sundance w/3.0L Eng.: 


1995-1989 Acclaim, Horizon, Reliant & Sundance w/2.2L 

& 2.5L Engs.: 


1988 Caravelle & Sundance w/2.5L Eng.: 


1988-1981 Caravelle, Horizon, Reliant, Sundance & TC3 

w/2.2L Eng.: 


1987-1986 Caravelle & Reliant w/2.5L Eng.: 


Plymouth (FWD) Breeze 

Engine 


2000-1998 Breeze w/2.4L Eng.: 



1999-1996 Breeze w/2.0L Eng.: 


1996 Breeze w/2.4L Eng.: 


44 





1983-1980 Horizon, TC3 & Turismo w/1.7L Eng.: 


1979-1978 Horizon w/1.7L Eng.: 



Plymouth (FWD) Champ 


Engine 


1982-1980 Champ w/1.4L Eng.: 


Engine 


1992 Colt Vista w/2.4L Eng.: 


Engine 


1994-1990 Laser w/1.8L Eng.: 


1994-1990 Laser w/2.0L Eng.: 


Engine 


1997-1995 Neon w/2.0L SOHC Eng.: 


1997-1995 Neon w/2.0L DOHC Eng.: 


Plymouth (FWD) Colt Vista (from 1992) 

Plymouth (FWD) Laser (from 1990) 

Plymouth (FWD) Neon 

Plymouth (FWD) Grand Voyager (2000-1984), Voyager (2000-1984) (2001) 

See Chrysler 

Engine 


2000-1997 Grand Voyager & Voyager w/2.4L Eng.: 



2000-1988 Grand Voyager & Voyager w/3.0L Eng.: 


1996 Grand Voyager & Voyager w/2.4L Eng.: 


1995-1989 Voyager w/2.5L Eng.: 

Belt, Tensioner & Water Pump Kit ........................... TBK153P 

1988 Voyager w/2.5L Eng.: 


Engine 


1996 Grand Prix w/3.4L Eng.: 


1995-1991 Grand Prix w/3.4L Eng.: 




1987 Voyager w/2.5L Eng.: 


1987-1984 Voyager w/2.2L Eng.: 


Pontiac (FWD) Grand Am, Grand Prix, J2000, Sunbird 

(from 1982) 





1994-1989 Sunbird w/2.0L Eng.: 


1989 Grand Am w/2.0L Eng.: 


(Continued) 

45

Pontiac (FWD) Grand Am, Grand Prix, J2000, Sunbird 

(from 1982) -- (Cont.) 





1988-1987 Grand Am & Sunbird w/2.0L Eng.: 


1986-1982 J2000 & Sunbird w/1.8L Eng.: 


Pontiac (FWD) Lemans (from 1988) 

Engine 


1993-1991 Lemans w/1.6L Eng.: 


1990 Lemans w/2.0L Eng.: 


1990-1988 Lemans w/1.6L Eng.: 


1989 Lemans w/2.0L 2nd Design Eng.: 


Pontiac (Canadian Models) Firefly 

Engine 


2000-1998 Firefly w/1.3L Eng.: 


2000-1996 Firefly w/1.0L Eng.: 


1997-1995 Firefly w/1.3L Eng.: 


1995-1994 Firefly w/1.0L Eng.: 


Pontiac (Canadian Models) Wave 

Engine 


2007-2005 Wave w/1.6L Eng.: 


Porsche 924 

Engine 


1982-1977 924 w/2.0L Eng.: 


46 





1989 Lemans w/2.0L 1st Design Eng.: 




1991-1988 Firefly w/1.0L Eng.: 



Saab 9000 


Engine 


1997-1995 9000 w/3.0L Eng.: 

Belt & Tensioner Kit w/Seals ................................ � TBK285P* 

Engine 


2005-2001 L300 & LW300 w/3.0L Eng.: 

Belt & Tensioner Kit w/Seals ............................. � TBK285BP* 

Engine 


2007-2004 Vue w/3.5L Eng.: 


2003-2002 Vue w/3.0L Eng.: 

Belt & Tensioner Kit w/Seals ............................. � TBK285BP* 

Engine 


1991-1987 825 & 827 w/2.5L & 2.7L Engs.: 


Engine 


1998 Impreza w/2.5L Eng.: 

Belt, Mech. Tens. & Water Pump Kit ............... � TBK277WP 

Belt, Hyd. Tens. & Water Pump Kit .................... TBK277AWP 

1998-1996 Legacy w/2.5L Eng.: 


1998-1995 Impreza w/2.2L Eng.: 


1998-1994 Legacy w/2.2L Eng.& Federal Emissions: 


1998-1990 Legacy w/2.2L Eng.& California Emissions: 


1997-1993 Impreza w/1.8L Eng.: 


Engine 


1998 Forester w/2.5L Eng.: 

Belt, Mech. Tens. & Water Pump Kit ............... � TBK277WP 

Belt, Hyd. Tens. & Water Pump Kit .................... TBK277AWP 

Saturn L300, LW300 

Saturn CUV Vue 

Sterling 825 Series, 827 Series 

Subaru DL, GL, GL-10, Impreza, Justy, Legacy, Loyale, RX, XT 





1994-1990 Loyale w/1.8L Eng.: 

Belt & Tensioner Kit w/Seals 

.................................... TBK299P 

1994-1987 Justy w/1.2L Eng.: 


1991-1985 XT w/1.8L Eng.: 


1989-1986 RX w/1.8L Eng.: 


1989-1985 DL, GL & GL-10 w/1.8L Eng.: 


Subaru CUV Forester 

47

Suzuki Esteem, Samurai, Sidekick, Swift, Vitara, X90 



Engine 


2005 Swift w/1.6L Eng.: 


2002-1999 Vitara w/1.6L Eng.: 


2001-1998 Swift w/1.3L Eng.: 


2001-1995 Esteem & X90 w/1.6L Eng.: 


1998-1992 Sidekick w/1.6L 16 Valve Engine: 


1997-1995 Swift w/1.3L Eng.: 


1994-1990 Samurai w/1.3L Eng.: 




1994-1989 Swift w/1.3L DOHC Eng.: 


1993-1989 Swift w/1.3L SOHC Eng.: 


1989 Sidekick w/1.6L Eng.: 


Toyota Passenger (FWD), Avalon, Camry, Celica (from 1986), Corolla, Paseo, 

Solara, Tercel 

Engine 


2008-2004 Solara w/3.3L Eng.: 


2006-2004 Camry w/3.3L Eng.: 


2002-1995 Avalon w/3.0L Eng.: 


2002-1994 Camry & Solara w/3.0L Eng.: 


2001-1999 Solara w/2.4L Eng.: 


2001-1989 Camry w/2.0L & 2.2L Engs.: 


1999-1990 Celica w/2.2L Eng.: 


1998-1995 Tercel w/1.5L Eng.: 


1997-1993 Celica & Corolla w/1.8L Eng.: 


1997-1993 Corolla w/1.6L Eng.: 


1997-1992 Paseo w/1.5L Eng.: 


1994-1989 Tercel w/1.5L Eng.: 


1993 Celica w/1.6L Eng.: 


1993-1992 Camry w/3.0L Eng.: 


Toyota Passenger (RWD), Cressida, MR2, Supra 

Engine 


1998-1994 Supra 3.0L Eng.: 


1995-1991 MR2 w/2.2L Eng.: 


1992-1986 Cressida & Supra w/3.0L Eng.: 


1988-1985 MR2 w/1.6L Eng.: 


1988-1984 Cressida & Supra w/2.8L Eng.: 


48 





1992-1990 Celica w/1.6L Eng.: 


1992-1989 Corolla w/1.6L Eng.: 


1991-1989 Camry w/2.5L Eng.: 


1989-1987 Celica w/2.0L Eng.: 


1988 Tercel Hatchback & Sed. w/1.5L Eng.: 


1988-1987 Camry w/2.0L Eng.: 


1988-1985 Corolla w/1.6L DOHC Eng.: 


1988-1983 Corolla w/1.6L SOHC Eng.: 


1988-1982 Tercel w/1.5L 3A, 3E & 3AC Engs.: 


1986 Celica w/2.0L Eng.: 


1986-1983 Camry w/2.0L Eng.: 

Belt, Tensioner & Water Pump Kit ....................... TBK087WP


Toyota Sienna 


Engine 


2006-2004 Sienna w/3.3L Eng.: 


2003-1998 Sienna w/3.0L Eng.: 


Engine 


2007-2004 Highlander w/3.3L Eng.: 


2003-2001 Highlander w/3.0L Eng.: 


2000-1996 RAV4 w/2.0L Eng.: 


Engine 


2008-2003 4Runner w/4.7L Eng.: 


2003-1995 4Runner, Pickup, Tacoma & Tundra w/3.4L 

Eng.: 


1995-1994 4Runner & Pickup w/3.0L Eng.: 


1993 4Runner & Pickup w/3.0L Eng. w/Oil Cooler 

Lines: 


Toyota CUV Highlander, RAV4 

Toyota Truck Pickup, Tacoma, Tundra, 4Runner 



1992-1988 4Runner & Pickup w/3.0L Eng. w/By Pass 

Tube: 


Volkswagen Beetle, Corrado, Dasher, Eos, Fox, GLI, GTI, Golf, Jetta, Passat, 

Phaeton, Rabbit, Rabbit Pickup, Scirocco, Vanagon 

Engine 


2008-2006 Eos, GLI, GTI, Jetta & Passat w/2.0L Turbo 

Eng.: 


2006-2004 Phaeton w/4.2L Eng.: 


2006-2004 Beetle, Golf & Jetta w/1.9L Turbo Diesel Eng.: 


2005-2004 Passat w/2.0L Turbo Diesel Eng.: 


2003-1999 Beetle, Golf & Jetta w/1.9L Diesel Eng.: 


2001-1998 Beetle, Golf & Jetta w/2.0L AEG Eng. & 

V-Belt: 


2001-1998 Passat w/1.8L Eng.: 


2000-1999 Golf & Jetta w/2.0L AEG Eng. w/o V-Belt: 


1999-1993 Golf, Jetta & Passat w/2.0L ABA Eng.: 


1998-1993 Golf & Jetta w/1.9L Diesel Eng.: 






1997-1995 Passat w/1.9L Diesel Eng.: 


1996-1995 Passat w/2.0L Eng.: 


1995-1981 Corrado, Fox, Golf, Jetta & Scirocco w/1.7L & 

1.8L SOHC Engs.: 


1994-1990 Passat w/2.0L DOHC Eng.: 


1992-1990 Golf & Jetta w/2.0L DOHC Eng.: 


1992-1977 Dasher, Golf, Jetta, Rabbit, Rabbit Pickup & 

Vanagon w/1.5L & 1.6L Diesel Engs.: 


1989-1987 Scirocco w/1.8L Eng.: 


1980-1976 Dasher, Jetta, Rabbit, Rabbit Pickup & 

Scirocco w/1.5L & 1.6L Gas Engs.: 


49

Volkswagen CUV Touareg 



Engine 


2007-2004 Touareg w/4.2L Eng.: 


Volvo C70, DL, GL, GLT, S40, S60, S70, S80, S90, V40, V70, V90, 

240 series, 740 series, 760 series, 780 series, 850 series, 940 series, 960 series 

Engine 


2005 S80 w/2.5L Turbo Eng.: 


50 

2005-2001 S60 & V70 w/2.4L Turbo & N. Asp. Engs.: 


2005-1998 S60 & V70 w/2.3L & 2.5L Turbo Engs.: 


2004-2000 C70 w/2.3L & 2.4L Turbo Engs.: 


2004-2000 S40 & V40 w/1.9L Turbo Eng.: 


2000 V70 w/2.4L Turbo & N. Asp. Engs. From Vin 

12266128: 


2000-1998 V70 w/2.4L Turbo & N. Asp. Engs. Thru Vin 

12266127: 


1999 S80 w/2.8L Turbo Eng.: 


1999-1998 C70 & S70 w/2.3L & 2.4L Turbo Engs.: 


1998-1997 S90 & V90 w/2.9L Eng.: 

Belt, Tensioner & Water Pump Kit ..................... TBK270BWP 

1997-1995 960 w/2.9L B6304F Eng.: 

Belt, Tensioner & Water Pump Kit ..................... TBK270BWP 

1997-1994 850 w/2.3L Turbo Eng.: 


1997-1993 850 w/2.4L Eng.: 


Volvo CUV XC70, XC90 

Engine 


2005-2003 XC70 w/2.5L Turbo Eng.: 


2005-2003 XC90 w/2.5L Turbo Eng.: 






1995-1993 940 w/2.3L Eng.: 


1994 960 w/2.9L Eng.: 


1993 240 w/2.3L Eng.: 


1993-1992 960 w/2.9L Eng.: 


1992-1991 940 w/2.3L SOHC Eng.: 


1992-1991 940 w/2.3L DOHC Eng.: 


1992-1986 240 w/2.3L Eng.: 


1992-1986 740, 760 & 780 w/2.3L SOHC Eng.: 


1990-1989 740 Series w/2.3L DOHC Eng.: 


1985-1983 DL & GL w/2.3L Eng.: 


1983-1981 GLT w/2.1L Eng.: 


1982-1980 DL & GL w/2.1L Eng.: 


1979-1976 242, 244 & 245 w/2.1L Eng.: 


Timing belt kit contents 

TBK014P 

DESCRIPTION PART NO. QTY. 

Belt .............................................................� T014 ...........................1 

Camshaft seal / Timing cover seal ............ 17107 .........................2 

Kit instruction sheet.................................... 457TBIS15P ..............1 

Seal installation sheet ................................ ACC014.......................1 

Tensioner...................................................... TBT54001 .................1 

•TBK017P 



Camshaft seal .............................................. 12724 .........................2 



Tensioner (337042AA) ............................. TBT11000 .................1 

Timing cover seal ........................................ 13709 .........................1 


•TBK032P 



Camshaft seal .............................................. 13945 .........................1 

Kit instruction sheet .................................. 457TBIS21P ..............1 


Tensioner...................................................... TBT16300 .................1 


•TBK036P 



Camshaft seal .............................................. 13857 .........................1 



Tensioner...................................................... TBT71202 .................1 



•TBK041P 



Camshaft seal .............................................. 10634 .........................1 

Kit instruction sheet.................................... 457TBIS041P ...........1 


Tensioner...................................................... TBT73102 .................1 

Timing cover seal (692409) ...................... 13907 .........................1 

•TBK043P 




Kit instruction sheet.................................... 457TBIS043P ..........1 


Tensioner...................................................... TBT11010 .................1 

•TBK067WP 



Camshaft seal .............................................. 13943 .........................1 

Kit instruction sheet.................................... 457TBIS3P ................1 


Tensioner...................................................... TBT54000 .................1 


Water pump ..............................................� W1251500 ................1 

•TBK067AWP 



Camshaft seal .............................................. 13943 .........................1 



Tensioner...................................................... TBT54000 .................1 


Water pump ..............................................� W1251720 ................1 

•TBK067BWP 



Camshaft seal .............................................. 13943 .........................1 



Tensioner...................................................... TBT54000 .................1 


Water pump ..............................................� W1251690 ................1 

•TBK070P 



Camshaft seal .............................................. 13857 .........................1 



Tensioner...................................................... TBT71202 .................1 


� Not sold separately • Applies to interference engine applications 

51


TBK071P 



Camshaft seal (for 52.62 mm OD) ........... 13953 .........................2 

Camshaft seal (w/o 16 valve eng) ............. 13624 .........................2 



Tensioner (w/o bracket) .............................. TBP61001 .................1 


•TBK073P 



Camshaft seal .............................................. 13943 .........................1 



Tensioner...................................................... TBT75100 .................1 


•TBK077P 



Camshaft seal ............................................. 15818 .........................1 



Tensioner...................................................... TBT72000 .................1 


•TBK078P 



Camshaft seal .............................................. 13429 .........................1 

Kit instruction sheet .................................. 457TBIS078P ...........1 


Tensioner...................................................... TBT72200 .................1 


•TBK078AP 



Camshaft seal .............................................. 13429 .........................1 

Kit instruction sheet.................................... 457TBIS078AP .........1 


Tensioner...................................................... TBT72300 .................1 


52 

TBK081WP 



Camshaft seal .............................................. 13709 .........................1 



Tensioner / Water pump 

(was VKPC55001) ....................................� W1301110 ................1 


TBK081AWP 



Camshaft seal .............................................. 13709 .........................1 


Seal installation sheet ................................ ACC081A ....................1 

Tensioner / Water pump 

(was VKPC55002) ....................................� W1301610 ................1 


TBK087WP 



Camshaft seal .............................................. 14671 .........................1 

Idler ............................................................... TBP81004 .................1 



Tensioner...................................................... TBT71101 .................1 


Water pump ..............................................� W1701530 ................1 

TBK095P 






Tensioner...................................................... TBT76202 .................1 

TBK100P 



Camshaft seal .............................................. 13429 .........................1 



Tensioner...................................................... TBT72300 .................1 


� Not sold separately • Applies to interference engine applications


•TBK101P 


Belt .............................................................� TBS101 ......................1 

Camshaft seal .............................................. 15292 .........................2 



Tensioner...................................................... TBT71404 .................1 


•TBK104P 



Camshaft seal .............................................. 13429 .........................2 



Tensioner...................................................... TBT72004 .................1 


TBK114P 



Camshaft seal .............................................. 13624 .........................1 



Tensioner...................................................... TBT51002 .................1 


TBK117WP 






Tensioner...................................................... TBT74001 .................1 

Water pump ..............................................� W1451290 ................1 

•TBK122P 



Camshaft seal .............................................. 11592 .........................1 

Camshaft seal .............................................. 13943 .........................1 



Tensioner...................................................... TBT79001 .................1 




•TBK124P 




Camshaft seal .............................................. 13943 .........................1 



Tensioner...................................................... TBT75130 .................1 

Tensioner...................................................... TBT75113 .................1 


•TBK124AP 




Camshaft seal .............................................. 13943 .........................1 



Tensioner...................................................... TBT75033 .................1 

Tensioner...................................................... TBT75113 .................1 


•TBK128P 



Camshaft seal .............................................. 13943 .........................1 



Tensioner...................................................... TBT75100 .................1 


•TBK129WP 



Camshaft seal .............................................. 13946 .........................2 

Camshaft seal .............................................. 14012 .........................2 



Tensioner...................................................... TBT73001 .................1 

Timing cover seal ........................................ 550232 ......................1 

Water pump ..............................................� W1351250 ................1 


53


•TBK130WP 



Camshaft seal .............................................. 10634 .........................2 



Tensioner...................................................... TBT73003 .................1 


Water pump ..............................................� W1351240 ................1 

•TBK131P 



Camshaft seal .............................................. 13943 .........................1 

Camshaft seal (692446) ............................ 14716 .........................1 



Tensioner (362527AD) .............................. TBT18100 .................1 



TBK132P 



Camshaft seal .............................................. 13624 .........................1 



Tensioner...................................................... TBT51002 .................1 


•TBK134WP 




Idler ............................................................... TBP84600 .................1 



Tensioner...................................................... TBT74600 .................1 

Water pump ..............................................� W1451320 ................1 

TBK135P 



Camshaft seal .............................................. 11671 .........................1 



Tensioner...................................................... TBT78105 .................1 



54 

•TBK139WP 



Camshaft seal .............................................. 13943 .........................2 



Tensioner...................................................... TBT75004 .................1 



Water pump ..............................................� W1481400 ................1 

•TBK141P 






Tensioner...................................................... TBT74200 .................1 

•TBK142WP 



Camshaft seal .............................................. 10634 .........................2 



Tensioner...................................................... TBT73002 .................1 


Water pump ..............................................� W1351330 ................1 

•TBK143WP 



Camshaft seal .............................................. 11429 .........................1 



Tensioner...................................................... TBT73000 .................1 


Water pump ..............................................� W1351260 ................1 

•TBK144WP 



Camshaft seal .............................................. 11429 .........................1 



Tensioner...................................................... TBT73002 .................1 


Water pump ..............................................� W1351290 ................1 



•TBK145WP 



Camshaft seal .............................................. 11429 .........................1 



Tensioner...................................................... TBT73000 .................1 


Water pump ..............................................� W1351260 ................1 

•TBK146P 



Camshaft seal .............................................. 14032 .........................1 

Idler ............................................................... TBP84007 .................2 



Tensioner...................................................... TBT74007 .................1 


•TBK147P 



Camshaft seal .............................................. 11592 .........................1 



Tensioner...................................................... TBT79000 .................1 


•TBK148WP 



Camshaft seal .............................................. 13709 .........................1 



Tensioner / Water pump .........................� W1301460 ................1 


TBK153P 



Camshaft seal .............................................. 13624 .........................1 





•TBK154WP 



Camshaft seal .............................................. 16893 .........................2 

Idler ............................................................... TBP81007 .................1 



Tensioner...................................................... TBT71800 .................1 


Water pump ..............................................� W1701810 ................1 

TBK155P 




Camshaft seal .............................................. 13943 .........................1 



Tensioner...................................................... TBT75113 .................1 

Tensioner...................................................... TBT75130 .................1 


TBK157WP 



Camshaft seal .............................................. 14936 .........................2 

Idler ............................................................... TBP81000 .................1 



Tensioner...................................................... TBT71004 .................1 


Water pump ..............................................� W1701710 ................1 

•TBK158P 




Camshaft seal .............................................. 11608 .........................1 

Camshaft seal .............................................. 13943 .........................1 



Tensioner...................................................... TBT75108 .................1 

Tensioner...................................................... TBT75119 .................1 





55


•TBK158AP 




Camshaft seal .............................................. 13943 .........................1 



Tensioner...................................................... TBT75008 .................1 

Tensioner...................................................... TBT75033 .................1 



•TBK160P 



Camshaft seal .............................................. 11429 .........................1 

Camshaft seal .............................................. 11592 .........................1 



Tensioner...................................................... TBT73200 .................1 



•TBK161WP 



Camshaft seal .............................................. 11429 .........................1 



Tensioner...................................................... TBT73101 .................1 


Water pump ..............................................� W1351220 ................1 

•TBK162WP 



Camshaft seal .............................................. 15800 .........................1 



Tensioner...................................................... TBT55006 .................1 


Water pump ..............................................� W1401300 ................1 

56 

•TBK163WP 



Camshaft seal .............................................. 13709 .........................1 



Tensioner...................................................... TBT70001 .................1 


Water pump ..............................................� W1301110 ................1 

•TBK163AWP 



Camshaft seal .............................................. 13709 .........................1 



Tensioner...................................................... TBT70001 .................1 


Water pump ..............................................� W1301610 ................1 

TBK164P 






Tensioner...................................................... TBT76202 .................1 

•TBK165P 




Camshaft seal .............................................. 13943 .........................2 

Camshaft seal .............................................. 13967 .........................2 

Idler ............................................................... TBP85000 .................1 



Tensioner...................................................... TBT75044 .................1 

Tensioner...................................................... TBT75144 .................1 





•TBK165AP 


Belt ( T168 not req) .................................� T165 ...........................1 

Camshaft seal .............................................. 13967 .........................2 

Idler ............................................................... TBP85000 .................1 



Tensioner...................................................... TBT75144 .................1 

Tensioner...................................................... TBT75044 .................1 


TBK166P 





Kit instruction sheet.................................... 457TBIS166P ..........1 


Tensioner...................................................... TBT76203 .................1 

•TBK167P 




Camshaft seal .............................................. 13943 .........................2 

Idler ............................................................... TBP85000 .................1 



Tensioner...................................................... TBT75044 .................1 

Tensioner...................................................... TBT75144 .................1 


•TBK167AP 




Camshaft seal .............................................. 13943 .........................2 

Idler ............................................................... TBP85000 .................1 



Tensioner...................................................... TBT75064 .................1 

Tensioner...................................................... TBT75613 .................1 


TBK170WP 



Camshaft seal .............................................. 12724 .........................1 

Idler ............................................................... TBP21031 .................1 

Idler ............................................................... TBP21032 .................1 




Water pump ..............................................� W1802050 ................1 

•TBK171P 






Tensioner...................................................... TBT76200 .................1 

•TBK172WP 



Bolt ............................................................... BOLT78000 ...............1 

Camshaft seal .............................................. 12717 .........................2 

Idler ............................................................... TBP88000 .................2 

Idler ............................................................... TBP88001 .................1 




Tensioner...................................................... TBT78000 .................1 


Water pump ..............................................� W1601120 ................1 

•TBK174P 




Camshaft seal .............................................. 12724 .........................2 

Camshaft seal .............................................. 13945 .........................2 



Tensioner...................................................... TBT16300 .................1 

Tensioner...................................................... TBT16402 .................1 



57


•TBK176P 



Camshaft seal .............................................. 13857 .........................2 



Tensioner...................................................... TBT71401 .................1 


•TBK177WP 



Camshaft seal .............................................. 11622 .........................1 

Camshaft seal .............................................. 15803 .........................1 



Tensioner...................................................... TBT55003 .................1 


Water pump ..............................................� W1401330 ................1 

•TBK178P 



Camshaft seal (562613) ............................ 10922 .........................1 



Tensioner...................................................... TBT77300 .................1 


•TBK179P 



Camshaft seal .............................................. 13429 .........................2 

Idler ............................................................... TBP84201 .................1 



Tensioner...................................................... TBT74201 .................1 


•TBK183P 



Camshaft seal (LH) ..................................... 25518 .........................1 

Camshaft seal (RH) ..................................... 15300 .........................1 

Idler ............................................................... TBP84003 .................1 

Idler ............................................................... TBP84004 .................1 



Tensioner...................................................... TBT74005 .................1 


58 

•TBK183AP 



Camshaft seal (LH) ..................................... 15300 .........................1 

Camshaft seal (RH) ..................................... 25518 .........................1 

Idler ............................................................... TBP84005 .................1 

Idler ............................................................... TBP84006 .................1 



Tensioner...................................................... TBT74005 .................1 


•TBK184WP 



Camshaft seal .............................................. 11422 .........................2 



Tensioner...................................................... TBT73201 .................1 


Water pump ..............................................� W1351400 ................1 

•TBK184AWP 



Camshaft seal .............................................. 10634 .........................2 



Tensioner...................................................... TBT73201 .................1 


Water pump ..............................................� W1351270 ................1 

•TBK185P 



Camshaft seal .............................................. 11612 .........................1 

Camshaft seal /Timing cover seal ............ 13429 .........................2 



Tensioner...................................................... TBT74200 .................1 




•TBK186WP 




Camshaft seal (562613) ............................ 10922 .........................1 



Tensioner...................................................... TBT73011 .................1 

Tensioner...................................................... TBT73600 ................1 


Water pump ..............................................� W1351280 ................1 

TBK190P 




Idler ............................................................... TBP81005 .................1 



Tensioner...................................................... TBT71008 .................1 

•TBK191P 



Camshaft seal .............................................. 13943 .........................1 



Tensioner...................................................... TBT75001 .................1 


TBK192P 



Camshaft seal ............................................. 16511 .........................2 


Idler ............................................................... TBP55005 .................2 


Tensioner...................................................... TBT55004 .................1 


•TBK193P 



Camshaft seal (692411) ............................ 13987 .........................2 



Tensioner...................................................... TBT73004 .................1 


•TBK194WP 



Camshaft seal .............................................. 13943 .........................1 

Idler (w/nut, bolt, block & spring) ............ TBP64100 .................1 




Water pump ..............................................� W1251720 ................1 

•TBK194AP 






Tensioner...................................................... TBT76200 .................1 

•TBK195WP 



Camshaft seal .............................................. 11608 .........................2 

Idler ............................................................... TBP85002 .................1 



Tensioner...................................................... TBT75000 .................1 


Water pump ..............................................� W1481500 ................1 

•TBK199WP 




Idler ............................................................... TBP81004 .................1 



Tensioner...................................................... TBT71003 .................1 



Water pump ..............................................� W1701770 ................1 


59


•TBK200WP 



Camshaft seal .............................................. 15818 .........................2 



Idler ............................................................... TBP81000 .................1 

Tensioner...................................................... TBT71004 .................1 


Water pump ..............................................� W1701710 ................1 

•TBK201WP 



Camshaft seal .............................................. 15818 .........................2 



Tensioner...................................................... TBT75002 .................1 


Water pump ..............................................� W1481470 ................1 

•TBK201AWP 



Camshaft seal .............................................. 13943 .........................1 



Tensioner...................................................... TBT75616 .................1 


Water pump ..............................................� W1482280 ................1 

•TBK203WP 



Camshaft seal .............................................. 13709 .........................1 



Tensioner...................................................... TBT15121 ................1 


Water pump ..............................................� W1551130 ................1 

•TBK204P 


Balance shaft tensioner ............................. TBT75113 .................1 



Camshaft seal .............................................. 13943 .........................2 



Tensioner...................................................... TBT75130 .................1 


60 

TBK208P 




Idler ............................................................... TBP81400 .................1 



Tensioner...................................................... TBT71400 .................1 

TBK210P 






Tensioner...................................................... TBT54001 .................1 

•TBK211WP 



Camshaft seal .............................................. 13943 .........................2 



Tensioner...................................................... TBT73602 .................1 


Water pump ..............................................� W1352430 ................1 

•TBK211AWP 



Camshaft seal .............................................. 11422 .........................2 



Tensioner...................................................... TBT73602 .................1 


Water pump ..............................................� W1352090 ................1 

•TBK212P 






Tensioner...................................................... TBT76001 .................1 



TBK214P 



Camshaft seal .............................................. 11612 .........................2 

Camshaft seal .............................................. 13429 .........................2 

Idler ............................................................... TBP84001 .................1 

Idler ............................................................... TBP84002 .................1 



Tensioner...................................................... TBT74000 .................1 


•TBK215P 



Camshaft seal .............................................. 15910 .........................2 



Tensioner...................................................... TBT71010 .................1 


•TBK216WP 




Camshaft seal (562613) ............................ 10922 .........................2 



Tensioner...................................................... TBT73011 .................1 

Tensioner...................................................... TBT73600 .................1 


Water pump ..............................................� W1351340 ................1 

•TBK217WP 



Camshaft seal .............................................. 17806 .........................2 

Idler ............................................................... TBP26610 .................1 

Idler ............................................................... TBP26600 .................1 



Tensioner...................................................... TBT16600 .................1 


Water pump ..............................................� W1901070 ................1 

•TBK218AWP 



Camshaft seal /Timing cover seal ............ 12724 .........................3 

Idler ............................................................... TBP21201 .................1 



Tensioner...................................................... TBT11201 .................1 

Water pump ..............................................� W1802120 ................1 

•TBK218BWP 



Camshaft seal .............................................. 12724 .........................2 

Idler ............................................................... TBP21201 .................1 

Kit instruction sheet.................................... 457TBIS218BP ........1 


Tensioner...................................................... TBT11200 .................1 


Water pump ..............................................� W1802090 ................1 

TBK219WP 



Camshaft seal .............................................. 11152 .........................2 



Tensioner...................................................... TBT51003 .................1 


Water pump ..............................................� W1201310 ................1 

•TBK220P 



Camshaft seal .............................................. 11592 .........................2 

Idler ............................................................... TBP89000 .................1 



Tensioner...................................................... TBT79007 .................1 



61


•TBK221WP 



Camshaft seal .............................................. 11592 .........................2 

Idler ............................................................... TBP89000 .................1 



Tensioner...................................................... TBT79007 .................1 


Water pump ..............................................� W1401340 ................1 

•TBK223WP 



Camshaft seal .............................................. 11429 .........................1 



Tensioner...................................................... TBT73000 .................1 


Water pump ................................................. W1351330 ................1 

•TBK224WP 


Belt .............................................................� TB224 ........................1 

Camshaft seal .............................................. 11429 .........................1 



Tensioner...................................................... TBT73005 .................1 


Water pump ..............................................� W1351390 ................1 

•TBK224AWP 


Belt .............................................................� TB224 ........................1 

Camshaft seal .............................................. 11429 .........................1 



Tensioner...................................................... TBT73005 .................1 


Water pump ..............................................� W1351320 ................1 

62 

•TBK226WP 




Camshaft seal .............................................. 11422 .........................2 




Tensioner...................................................... TBT73011 .................1 

Tensioner...................................................... TBT73600 .................1 

Water pump ..............................................� W1351330 ................1 

•TBK227WP 



Camshaft seal .............................................. 10634 .........................2 

Camshaft seal .............................................. 11429 .........................2 



Tensioner...................................................... TBT73201 .................1 



Water pump ..............................................� W1352200 ................1 

•TBK228P 



Camshaft seal .............................................. 13429 .........................2 

Idler ............................................................... TBP84000 .................1 



Tensioner...................................................... TBT74002 .................1 


•TBK229P 




Camshaft seal .............................................. 13943 .........................1 



Tensioner...................................................... TBT75044 ................1 

Tensioner...................................................... TBT75033 .................1 




•TBK230P 




Camshaft seal .............................................. 13943 .........................1 

Idler ............................................................... TBP85000 .................1 



Tensioner...................................................... TBT75044 .................1 

Tensioner...................................................... TBT75064 .................1 



•TBK230AP 




Camshaft seal .............................................. 13943 .........................1 

Idler ............................................................... TBP85000 .................1 



Tensioner...................................................... TBT75064 .................1 

Tensioner...................................................... TBT75613 .................1 



•TBK232P 




Camshaft seal .............................................. 13943 .........................1 

Idler ............................................................... TBP85000 .................1 



Tensioner...................................................... TBT75044 .................1 

Tensioner...................................................... TBT75064 .................1 


•TBK233P 



Camshaft seal .............................................. 12718 .........................1 

Idler ............................................................... TBP81200 .................1 



Tensioner...................................................... TBT71201 .................1 


TBK234P 



Camshaft seal .............................................. 13945 .........................1 



Tensioner...................................................... TBT16300 .................1 


•TBK235P 







Tensioner...................................................... TBT71007 .................1 

•TBK236P 







Tensioner...................................................... TBT71007 .................1 

TBK237P 



Camshaft seal .............................................. 13857 .........................2 



Tensioner...................................................... TBT71700 .................1 


TBK239P 



Camshaft seal .............................................. 13857 .........................2 



Tensioner...................................................... TBT71202 .................1 



63


•TBK240WP 



Camshaft seal .............................................. 16893 .........................2 

Idler ............................................................... TBP81007 .................1 



Tensioner (for spring type)......................... TBT71800 .................1 


Water pump ................................................. W1701900 ................1 

•TBK240AWP 



Camshaft seal .............................................. 16893 .........................2 

Idler ............................................................... TBP81007 .................1 



Tensioner (for hyd type) ............................. TBT71011 .................1 



Water pump ..............................................� W1701900 ................1 

•TBK241P 






Tensioner...................................................... TBT76203 .................1 

•TBK242P 






Tensioner...................................................... TBT11014C ...............1 

64 

•TBK244WP 




Camshaft seal (562613) ............................ 10922 .........................1 

Kit instruction sheet .................................. 457TBIS70P ..............1 


Tensioner...................................................... TBT73011 .................1 

Tensioner...................................................... TBT73600 .................1 



Water pump ..............................................� W1351280 ................1 

•TBK245WP 



Camshaft seal .............................................. 13709 .........................1 



Tensioner (for hyd type brg only) .............. TBT51001 .................1 


Water pump ..............................................� W1201300 ................1 

•TBK245AWP 



Camshaft seal .............................................. 13709 .........................2 



Tensioner (for mechanical type) ................ TBT51006 .................1 


Water pump ..............................................� W1201300 ................1 

•TBK245BWP 



Camshaft seal .............................................. 13709 .........................2 



Tensioner (for hyd type brg w/brckt) ........ TBT51003 .................1 


Water pump ..............................................� W1201300 ................1 



•TBK246WP 



Camshaft seal .............................................. 13709 .........................2 



Tensioner...................................................... TBT51001 .................2 


Water pump ..............................................� W1201300 ................1 

•TBK247WP 



Camshaft seal .............................................. 10634 .........................2 



Tensioner...................................................... TBT73201 .................1 


Water pump ..............................................� W1352210 ................1 

TBK248P 






Tensioner...................................................... TBT74202 .................1 

•TBK249P 



Camshaft seal .............................................. 13429 .........................1 



Tensioner...................................................... TBT72004 .................1 




•TBK251P 




Idler ............................................................... TBP82501 .................1 

Idler ............................................................... TBP82000 .................1 

Idler / Tensioner .......................................... TBP82001 .................1 



•TBK252WP 



Camshaft ...................................................... 17806 .........................2 

Idler ............................................................... TBP26602 .................1 



Tensioner...................................................... TBT16604 .................1 


Water pump ..............................................� W1901070 ................1 

•TBK252AWP 



Camshaft ...................................................... 17806 .........................2 

Idler ............................................................... TBP26600 .................1 



Tensioner...................................................... TBT16602 .................1 


Water pump ..............................................� W1902090 ................1 

•TBK254WP 



Camshaft seal .............................................. 12717 .........................2 

Idler ............................................................... TBP88000 .................2 

Idler ............................................................... TBP88001 .................1 




Tensioner...................................................... TBT78000 .................1 


Water pump ..............................................� W1601120 ................1 

TBK255WP 



Camshaft seal .............................................. 11152 .........................1 



Tensioner...................................................... TBT51001 .................1 


Water pump ..............................................� W1201320 ................1 


65


•TBK256WP 




Camshaft seal .............................................. 17154 .........................2 

Idler ............................................................... TBP85000 .................1 



Tensioner...................................................... TBT75064 .................1 

Tensioner...................................................... TBT75613 .................1 


Water pump ..............................................� W1481480 ................1 

•TBK257WP 



Camshaft seal .............................................. 14713 .........................2 

Idler ............................................................... TBP81000 .................1 



Tensioner...................................................... TBT71004 .................1 



Water pump ..............................................� W1701920 ................1 

•TBK257AWP 



Camshaft seal .............................................. 14713 .........................2 

Idler ............................................................... TBP81000 .................1 



Tensioner...................................................... TBT71304 .................1 


Water pump ..............................................� W1701920 ................1 

TBK258P 



Camshaft seal .............................................. 16487 .........................2 

Idler ............................................................... TBP64001 .................1 

Idler ............................................................... TBP64002 .................1 



Tensioner...................................................... TBT54002 .................1 


66 

•TBK259WP 



Camshaft seal .............................................. 13943 .........................2 

Idler ............................................................... TBP85002 .................1 



Tensioner...................................................... TBT75000 .................1 


Water pump ..............................................� W1481510 ................1 

•TBK259AWP 



Camshaft seal .............................................. 13943 .........................2 

Idler ............................................................... TBP85002 .................1 



Tensioner...................................................... TBT75000 .................1 


Water pump ..............................................� W1482320 ................1 

•TBK262WP 





Nut (w/bolt & washer kit) ........................� 26198243 .................1 


Tensioner...................................................... TBT11000 .................1 

Water pump ..............................................� W1801070 ................1 

•TBK262AP 





Nut (w/ bolt & washer kit) .......................� 26198243 .................1 


Tensioner...................................................... TBT11000 .................1 

•TBK263WP 



Camshaft seals ............................................ 14012 .........................2 



Tensioner...................................................... TBT73001 .................1 

Timing cover seal ........................................ 550232 ......................1 

Water pump ..............................................� W1351250 ................1 



•TBK264WP 




Idler ............................................................... TBP84600 .................1 



Tensioner...................................................... TBT74600 .................1 

Water pump ..............................................� W1451320 ................1 

TBK265WP 



Camshaft seal .............................................. 13709 .........................2 

Idler ............................................................... TBP51007 .................1 




Tensioner (mech type, no brkt) ................. TBT51006 .................1 

Water pump ..............................................� W1201330 ................1 

TBK265AWP 



Camshaft seal .............................................. 13709 .........................2 

Idler ............................................................... TBP51007 .................1 




Tensioner (mech type w/brkt) ................... TBT51016 .................1 

Water pump ..............................................� W1204220 ................1 

TBK265BWP 



Camshaft seal .............................................. 13709 .........................2 

Idler ............................................................... TBP51007 .................1 




Tensioner (mech type) ................................ TBT51004 .................1 

Water pump ..............................................� W1204220 ................1 

•TBK266P 



Camshaft seal .............................................. 13429 .........................2 

Idler ............................................................... TBP84201 .................1 

Idler ............................................................... TBP84604 .................1 



Tensioner...................................................... TBT74201 .................1 


•TBK266AP 




Camshaft seal .............................................. 13429 .........................2 

Idler ............................................................... TBP84201 .................1 

Idler ............................................................... TBP84604 .................1 



Tensioner...................................................... TBT74201 .................1 


•TBK267P 



Camshaft seal .............................................. 11612 .........................2 

Idler ............................................................... TBP84001 .................2 



Tensioner...................................................... TBT74611 .................1 

Tensioner...................................................... TBT84606 .................1 


•TBK270AWP 



Camshaft seal .............................................. 17806 .........................2 



Tensioner...................................................... TBT16612 .................1 

Tensioner / Idler (307582) ........................ TBT16612 .................1 


Water pump ..............................................� W1902120 ................1 


67


•TBK270BWP 



Camshaft seal .............................................. 17806 .........................2 



Tensioner...................................................... TBT16612 .................1 

Tensioner / Idler (30758261) ................... TBT26612 .................1 


Water pump ..............................................� W1902090 ................1 

•TBK271WP 



Camshaft seal .............................................. 14761 .........................2 

Idler ............................................................... TBP81401 .................1 



Tensioner...................................................... TBT71701 .................1 


Water pump ..............................................� W1701970 ................1 

•TBK272P 






Tensioner...................................................... TBT76001 .................1 

•TBK273P 



Camshaft seal .............................................. 16511 .........................2 

Idler ............................................................... TBP55005 .................2 



Tensioner...................................................... TBT55004 .................1 


•TBK276P 






Tensioner...................................................... TBT54001 .................1 

68 

•TBK277AWP 



Camshaft seal .............................................. 12717 .........................2 

Idler ............................................................... TBP88000 .................1 

Idler ............................................................... TBP88001 .................1 



Tensioner...................................................... TBT78003 .................1 


Water pump ..............................................� W1601120 ................1 

•TBK277WP 



Camshaft seal .............................................. 12717 .........................2 

Idler ............................................................... TBP88000 .................1 

Idler ............................................................... TBP88001 .................1 



Tensioner...................................................... TBT78003 .................2 


Water pump ..............................................� W1601120 ................1 

•TBK278P 



Camshaft seal .............................................. 13967 .........................2 

Idler ............................................................... TBP75623 .................1 


Seal instructions ......................................... ACC165A ....................1 

Tensioner...................................................... TBT75622 .................1 


•TBK279P 




Camshaft seal .............................................. 13943 .........................2 

Idler ............................................................... TBP83004 .................1 


Seal instructions ......................................... ACC279.......................1 

Tensioner...................................................... TBT73004 .................1 




•TBK281WP 




Idler ............................................................... TBP84601 .................1 



Tensioner...................................................... TBT74600 .................1 

Water pump ..............................................� W1431190 ................1 

•TBK282P 



Camshaft seal .............................................. 13943 .........................1 

Idler ............................................................... TBP85145 .................1 



Tensioner...................................................... TBT75006 .................1 


•TBK283WP 



Camshaft seal .............................................. 16473 .........................1 



Tensioner...................................................... TBT54004 .................1 


Water pump ..............................................� W1251990 ................1 

•TBK283AP 



Camshaft seal .............................................. 16473 .........................1 



Tensioner...................................................... TBT54004 .................1 


•TBK284P 



Camshaft seal .............................................. 13943 .........................1 

Idler ............................................................... TBP75623 .................1 




Tensioner...................................................... TBT75622 ................1 

•TBK285P 



Camshaft seal .............................................. 13709 .........................4 

Idler (337185A) .......................................... TBT25500 .................1 



Tensioner...................................................... TBT15500 .................1 


•TBK285AP 



Camshaft seal .............................................. 13709 .........................4 

Idler (337185A) .......................................... TBT25500 .................1 



Tensioner...................................................... TBT55002 .................1 


•TBK285BP 



Camshaft seal .............................................. 14713 .........................1 

Idler (337185A) .......................................... TBT25500 .................1 



Tensioner...................................................... TBT55001 .................1 


•TBK286WP 



Camshaft seal .............................................. 15701 .........................2 

Idler ............................................................... TBP83003 .................1 



Tensioner...................................................... TBT73605 .................1 


Water pump ..............................................� W1352380 ................1 


69


•TBK287WP 



Camshaft seal .............................................. 13943 .........................2 

Idler ............................................................... TBP85002 .................1 



Tensioner...................................................... TBT75000 .................1 


Water pump ..............................................� W1481510 ................1 

•TBK288WP 



Camshaft seal .............................................. 13943 .........................1 



Tensioner...................................................... TBT75616 .................1 


Water pump ..............................................� W1482280 ................1 

•TBK289P 


Belt ................................................................ T289 ...........................1 

Camshaft seal .............................................. 13943 .........................1 



Tensioner...................................................... TBT75615 .................1 


•TBK292P 






Tensioner (337042AA) ............................... TBT11000 .................1 

•TBK294WP 



Camshaft seal .............................................. 13943 .........................2 

Caution sheet .............................................. 457874P ....................1 

Endflap label ................................................ 457816P ....................1 

Idler ............................................................... TBP64003 .................1 

Idler ............................................................... TBP64004 .................1 



Tensioner...................................................... TBT54003 .................1 


Water pump ..............................................� W1252100 ................1 

70 

•TBK294AWP 



Camshaft seal .............................................. 13943 .........................2 



Idler ............................................................... TBP64003 .................1 

Idler ............................................................... TBP64005 .................1 



Tensioner...................................................... TBT54003 .................1 


Water pump ..............................................� W1252100 ................1 

•TBK294BWP 



Camshaft seal .............................................. 13943 .........................2 



Idler ............................................................... TBP64005 .................1 



Tensioner...................................................... TBT54003 .................1 


Water pump ..............................................� W1252100 ................1 

•TBK295WP 



Camshaft seal .............................................. 14560 .........................2 



Tensioner...................................................... TBT51003 .................1 


Water pump ..............................................� W1201350 ................1 

•TBK295AWP 



Camshaft seal .............................................. 14560 .........................2 



Tensioner...................................................... TBT51001 .................1 


Water pump ..............................................� W1207170 ................1 



•TBK296WP 






Tensioner (ARB1111BB) .......................... TBT11113 .................1 

Water pump ..............................................� W1802220 ................1 

•TBK297BWP 



Camshaft seal .............................................. 12724 .........................2 

Idler ............................................................... TBP21202 .................1 


Seal installation sheet ................................ ACC297B ....................1 

Tensioner...................................................... TBT11202 ................1 


Water pump ..............................................� W1802250 ................1 

•TBK298P 



Camshaft seal .............................................. 14713 .........................2 

Idler ............................................................... TBP81005 .................1 



Tensioner...................................................... TBT71008 .................1 


TBK299P 




Camshaft seal .............................................. 14772 .........................2 

Idler ............................................................... TBP88002 .................1 



Tensioner...................................................... TBT78001 .................1 

Tensioner...................................................... TBT78002 .................1 


•TBK302WP 



Camshaft seal .............................................. 17154 .........................2 

Idler ............................................................... TBP84201 .................1 



Tensioner...................................................... TBT74603 .................1 


Water pump ..............................................� W1432001 ................1 

•TBK303WP 



Camshaft seal .............................................. 11592 .........................2 

Idler ............................................................... TBP89006 .................1 



Tensioner...................................................... TBT79004 .................1 


Water pump ..............................................� W1401440 ................1 

•TBK308P 



Camshaft seal .............................................. 13429 .........................1 

Idler ............................................................... TBP84201 .................1 



Tensioner...................................................... TBT74201 .................1 


•TBK313P 




Camshaft seal .............................................. 13934 .........................2 

Idler ............................................................... TBP85000 .................1 



Tensioner...................................................... TBT75613 .................1 

Tensioner...................................................... TBT75633 .................1 



71


•TBK315WP 



Camshaft seal .............................................. 11823 .........................2 



Tensioner...................................................... TBT85146 .................1 

Tensioner...................................................... TBT75618 .................1 



Water pump ..............................................� W1462040 ................1 

•TBK316WP 



Camshaft seal .............................................. 13429 .........................2 

Idler ............................................................... TBP84000 .................1 



Tensioner...................................................... TBT74006 .................1 


Warning ........................................................ 457037P ....................1 

Water pump ..............................................� W1451410 ................1 

•TBK317WP 



Camshaft seal / Timing cover seals .......... 12724 .........................3 

Idler ............................................................... TBP21004 .................1 



Tensioner...................................................... TBT11008 .................1 

Tensioner piston .......................................... P01008 ......................1 

Water pump ..............................................� W1802230 ................1 

•TBK318WP 



Camshaft seal .............................................. 13382 .........................2 

Idler ............................................................... TBP84201 .................1 



Tensioner...................................................... TBT74201 .................1 


Water pump ..............................................� W1462003 ................1 

72 

•TBK320WP 



Camshaft seal (692409) ............................ 13907 .........................2 

Idler ............................................................... TBP85002 .................1 



Tensioner...................................................... TBT75000 .................1 


Water pump ..............................................� W1481790 ................1 

•TBK321WP 




Idler ............................................................... TBP21004 .................1 

Idler ............................................................... TBP21130 .................1 

Idler ............................................................... TBP21131 .................1 



Tensioner...................................................... TBT11130C ...............1 

Water pump ..............................................� W1802220 ................1 

•TBK322WP 



Camshaft seal .............................................. 11608 .........................1 

Idler ............................................................... TBP85002 .................1 



Tensioner...................................................... TBT75000 .................1 


Water pump ..............................................� W1461130 ................1 

•TBK323WP 



Camshaft seal .............................................. 11608 .........................1 

Idler ............................................................... TBP85002 .................1 



Tensioner...................................................... TBT75000 .................1 


Water pump ..............................................� W1461130 ................1 



•TBK324P 



Camshaft seal .............................................. 13943 .........................1 



Tensioner...................................................... TBT75006 .................1 


•TBK329WP 



Camshaft seal .............................................. 15701 .........................1 

Idler ............................................................... TBP83004 .................1 



Tensioner...................................................... TBT73606 .................1 


Water pump ..............................................� W1351530 ................1 

•TBK331WP 



Camshaft seal .............................................. 17806 .........................2 

Idler ............................................................... TBP26602 .................1 



Tensioner...................................................... TBT16604 .................1 


Water pump ..............................................� W1901070 ................1 

•TBK332WP 




Camshaft seal .............................................. 13943 .........................1 



Tensioner...................................................... TBT75613 .................1 


Water pump ..............................................� W1482330 ................1 

•TBK332AWP 




Camshaft seal .............................................. 13943 .........................1 



Tensioner...................................................... TBT75613 .................1 


Water pump ..............................................� W1481780 ................1 

TBK333WP 






Tensioner...................................................... TBT16604 .................1 

Tensioner...................................................... TBT21147 .................1 

Water pump ..............................................� W1802200 ................1 

TBK334P 







TBK335WP 



Camshaft seal .............................................. 16473 .........................2 

Idler ............................................................... TBP85000 .................1 



Tensioner...................................................... TBT70000 .................1 


Water pump ..............................................� W1301920 ................2 


73

Frequently asked questions 

Q: Tensioners and idler pulleys 

sometimes look the same. 

Can I interchange? 

A: You should only fit part numbers 

specifically shown for that 

application. Automotive engines 

each have their own particular 

performance characteristics, 

which means that tensioner 

and pulleys are designed and 

tested specifically for each new 

motor. The exterior appearance 

of the bearing unit may hide 

internal changes that have taken 

place to meet the change in 

engine specification, i.e., grease 

performance, bearing clearance, 

tolerances, tensioner spring 

strength. 

Q: Can I refit an old timing belt? 

A: NO. Used belts should not 

be refitted and used. The original 

belt has already been in use 

at its optimized tension, so 

the properties of the belt have 

changed compared with a new 

belt. 

Q: The tensioner is showing 

external corrosion but is rotating 

freely. Is it okay? 

A: Change it. If the belt is being 

changed, then it is possible this 

unit will need to be functioning 

on the car for another 60,000 

mi/96 560 km. Don’t take the 

risk: internal condition and 

bearing life cannot be seen. 

Q: How often should a complete 

timing belt and tensioner change 

be carried out? 

A: Most car manufacturers including 

NISSAN, FORD, HONDA, and 

CHEVROLET specify complete 

repairs to their models during a 

specified service period. Outside 

this period the system should be 

checked for damage. Or if 

you are in doubt about the 

condition of components, you 

should recommend a complete 

change to your customer. 

74 

Q: There are many brands 

of timing belt kits available. 

Why should I use SKF? 

A: SKF was the first company 

to launch this concept, and since 

then has continued to use its OE 

manufacturing experience to lead 

the market with OE approved 

components in SKF branded 

boxes. 

Q: What’s the main benefit 

to our repair shop for using 

timing belt kits? 

A: You will be more efficient, having 

the necessary components in one 

box. You will also have the ability 

to promote a professional image 

to your customers in terms of 

quality of work and service. The 

end result is higher customer 

satisfaction and a stronger 

business. 

Specific removal and installation 

instructions by make, model and 

year included in each kit. 

Q: Can I buy the tensioner 

or pulleys on their own? 

A: Sometimes you will only be 

required by the customer to 

change the pulley or tensioner, 

so for flexibility we offer an 

extensive range for our customers. 

Q: What is the difference 

between a timing belt kit 

and a multi-V belt kit? 

A: The timing belt kit is used 

on timing system in which 

the crankshaft drives the 

camshaft(s) and actuates 

the valves via a timing belt. 

The multi-V belt kit is used 

on auxiliary drives in which 

the crankshaft drives auxiliary 

components such as the 

alternator, air conditioning 

compressor, power steering 

pump etc., via a multi-V belt. 

Q: What is a belt tensioner unit? 

A: The belt tensioner unit sets the 

right belt tension and provides 

guidance for the belt. 

Q: What is the difference 

between a BTU and an 

Automatic BTU? 

A: The adjustment of tension during 

mounting is achieved by means 

of an eccentric or by means of a 

spring acting against a contact 

pad on the bracket. 

Q: What is an idler pulley? 

A: The idler pulley is fixed and 

allows the belt to be correctly 

wound around the driven 

components. 

Q: How can I check the belt 

tensioner? 

A: A belt tension testing device that 

ensures proper tension of the belt 

after mounting should be used. 

Q: What are the main causes 

of belt damage? 

A: Too high or too low tension, 

vibrations, high temperature and 

belt misalignment. 

Q: Why is it recommended to 

also change belt tensioner 

and pulleys when the belt is 

repaired? 

A: The main source of the belt’s 

damage has most definitely 

affected the other rotating 

components of the timing 

and auxiliary systems, like the 

BTU, Automatic BTU and idler 

pulley. To allow a complete and 

safe repair for the engine, SKF 

recommends changing the belt 

and the belt tensioner pulleys at 

the same time.

Belt performance and quality 

Timing belts offer numerous advantages over chain and gear drives: greater efficiency, reduced weight, quieter 

operation and fuel savings. 

Constant synchronous power is assured with precision molded teeth that perfectly mesh with pulley grooves pitch, 

width and length. 

Fast facts 

• Increased engine demands required tougher, more 

durable timing belts and pulleys with high quality 

bearings and seals 

• Belts made of high quality materials cost more—but 

the added performance makes them the best value 

• Belts may look alike, but they are not 

interchangeable. Correct tooth profiles are critical. 

• Timing belt failure can result in not just 

inconvenience, but costly engine damage. 

• The cost of the belt is only 5%-10% of changing the belt. 

Your customers will agree that it’s a small price to 

pay for peace of mind. 

Belt construction 

Special belt materials provide durability performance and 

reliability in the high-temperature engine compartments 

of today’s vehicles. 

High tensile strength fiberglass or aramid cords resist 

stretching and shrinking. The belt facing consists of wear 

resistant fabric which protects the tooth surface and 

keeps frictional loss at a minimum. 

New belt designs 

Generic timing belts, made of standard materials 

with standard tooth profiles, are a thing of the past. 

New generation belts are vastly improved, providing 

the increased durability and smoother performance 

characteristics demanded by today’s engines—and your 

customers. 

Application-specific tooth profiles 

The earliest timing belts had a trapezoidal tooth design. 

But the need to meet more demanding applications 

resulted in the development of belts with curvilinear 

and modified curvilinear profiles. These different tooth 

profiles are not interchangeable. It is critically important 

to select the correct belt for each specific application. (See 

illustrations below for tooth profiles.) 

Trapezoidal 

Curvilinear 

(Round) 

Modified curvilinear 

(Round) 

75

Belt specifications 

SKF No. Width Length 

belt no. teeth mm / in mm / in Profile 

T 014 129 22.3 mm / 1228.7 mm / Trapezoidal 

7/8" 48 3/8" 

T 017 121 18 mm / 1152.5 mm / Trapezoidal 

5/7" 45 3/8" 


3/4" 46 1/8" 


3/4" 35 1/4" 


3/4" 35 5/8" 


1" 50 5/8" 


1" 36 3/8" 


3/4" 33" 


35/36" 46 1/2" 


3/4" 34 1/2" 


3/4" 39 3/4" 


3/4" 36 3/4" 

T 081 111 20 mm / 1057.3 mm / Round 

4/5" 41 5/8" 

T 087 139 25.4 mm / 1324 mm / Trapezoidal 

1" 52 1/8" 


3/4" 33 3/8" 


3/4" 35 5/8" 

T 101 169 25.4 mm / 1352 mm / Round 

1" 53 1/4" 


1" 49 7/8" 

T 107 117 19 mm / 1114.4 mm / Round 

3/4" 43 7/8" 

76 

Note: Timing belts are component items and are not sold separately. 




15/16" 47 1/4" 

T 117 109 22 mm / 1038.2 mm / Round 

7/8" 40 7/8" 

T 122 115 20 mm / 1095 4 mm / Trapezoidal 

4/5” 43 1/8” 


3/4” 46 1/8” 


3/4” 34 1/2” 

T 129 192 28 mm / 1828.8 mm / Round 

1 1/8” 72” 

T130 129 24 mm / 1228.7 mm / Round 

15/16” 48 3/8” 

T 131 127 25.4 mm / 1043.9 mm / Round 

1” 41” 

T 132 126 23.8 mm / 1200.1 mm / Round 

15/16” 47 1/4” 

T 134 110 25.4 mm / 1047.7 mm / Round 

1” 41 1/4” 

T 135 89 19 mm / 847.7 mm / Round 

3/4” 33 3/8” 

T 139 149 25.4 mm / 1419.2 mm / Round 

1” 55 7/8” 

T 141 107 21.1 mm / 856 mm / Round 

13/16” 33 5/7” 

T 142 124 24 mm / 1181.1 mm / Round 

15/16” 46 1/2” 

T 143 106 24 mm / 1009.6 mm / Round 

15/16” 39 3/4” 

T 144 107 24 mm / 1019.2 mm / Round 

15/16” 40 1/8” 

T 145 107 24 mm / 1019.2 mm / Round 

15/16” 40 1/8” 

T 146 173 30 mm / 1384.3 mm / Round 

1 3/16” 54 1/2” 

T 147 137 25.4 mm / 1096 mm / Round 

1” 43 1/7”




T 148 104 17 mm / 990.6 mm / Round 

2/3” 39” 

T 150 118 22 mm / 944 mm / Round 

7/8” 37 1/6” 

T 152 119 25.4 mm / 1133.5 mm / Round 

1” 44 5/8” 

T 153 124 23.8 mm / 1181.1 mm / Round 

15/16” 46 1/2” 

T 154 193 36 mm / 1544 mm / Round 

1 317” 60 4/5” 

T 155 122 24 mm / 1162 mm / Round 

15/16” 45 3/4” 

T 157 179 31.8 mm / 1432 mm / Round 

1 1/4” 56 3/8” 

T 158 122 19 mm / 1162 mm / Round 

3/4” 45 3/4” 


1/2” 20 5/8” 

T 160 108 24 mm / 1028.7 mm / Round 

15/16” 40 1/2” 

T 161 101 24 mm / 962 mm / Round 

15/16” 37 7/8” 

T 162 112 19 mm / 896 mm / Round 

3/4” 35 1/4” 

T 163 125 20 mm / 1190.6 mm / Round 

4/5” 46 7/8” 

T 164 95 19 mm / 904.9 mm / Round 

3/4” 35 5/8” 

T 165 151 29 mm / 1438.3 mm / Round 

1 9/64” 56 5/8” 


3/4” 36 3/8” 

T 167 153 29 mm / 1457.3 mm / Round 

1 9/64” 57 3/8” 

T 168 65 12.7 mm / 520 mm / Round 

1/2” 20 15/32” 

T 170 142 19 mm / 1136 mm / Round 

3/4” 44 3/4” 



T 171 119 25.4 mm / 1133.48 mm / Round 

1” 44 5/8” 

T 172 211 4.76 mm / 1687.51 mm / Round 

1 3/16” 66 7/16” 

T 173 164 22.98 mm / 1562.1 mm / Round 

48/53” 61 1/2” 

T 174 110 14.11 mm / 1123.95 mm / Round 

5/9” 41 1/4” 

T 176 113 19 mm / 1076.3 mm / Round 

3/4” 42 3/8” 

T 177 112 25.4 mm / 896 mm / Round 

1” 35 1/4” 

T 178 91 19 mm / 866.8 mm / Round 

3/4” 31 1/8” 

T 179 145 22 mm / 1160 mm / Round 

7/8” 45 21/32” 

T 183 239 35 mm / 1912 mm / Round 

1 3/8” 75 1/8” 

T 184 125 26 mm / 1190.6 mm / Round 

1 1/32” 26 1/4” 

T 185 107 21.5 mm / 856 mm / Round 

6/7” 33 23/32” 

T 186 70 16 mm / 666.7 mm / Round 

5/8” 26 1/4” 

T 187 113 24 mm / 1076.3 mm / Round 

15/16” 42 3/8” 

T 190 209 34 mm / 1672 mm / Round 

1 5/16” 65 5/8 

T 191 92 22 mm / 876.3 mm / Round 

7/8” 34 1/2” 



1 5/16” 63 3/8” 

T 193 196 28 mm / 1866.9 mm / Round 

1 1/8” 73 3/8” 

T 194 97 25.4 mm / 923.9 mm / Round 

1” 36 3/8” 

T 195 257 32 mm / 2056 mm / Round 

1 1/4” 81” 

77




T 198 167 23 mm / 1590.7 mm / Round 

48/53” 62 5/8” 

T 199 163 26.7 mm / 1304 mm / Round 

1 1/16” 51 3/8” 

T 200 191 31.8 mm / 1528 mm / Round 

1 1/4” 60 3/16” 

T 201 121 29 mm / 968 mm / Round 

1 9/64” 38 1/8” 

T 203 111 17 mm / 1057.3 mm / Round 

2/3” 41 5/8” 

T 204 123 24 mm / 1171.6 mm / Round 

15/16” 46 1/4” 

T 208 128 26 mm / 1024 mm / Round 

1 1/32” 40 5/16” 

T 209 241 34 mm / 1928 mm / Round 

1 5/16” 76” 

T 210 129 22.3 mm / 1228.7 mm / Round 

7/8” 48 3/8” 

T 211 113 21 mm / 1076.3 mm / Round 

13/16” 42 3/8” 

T 212 103 25.4 mm / 981.1 mm / Round 

1” 38 5/8” 

T 214 192 30 mm / 1536 mm / Round 

1 3/16” 60 1/2” 

T 215 143 25.4 mm / 1144 mm / Round 

1” 45 1/32” 

T 216 127 24 mm / 1209.7 mm / Round 

15/16” 47 5/8” 

T 217 143 21 mm / 1362.1 mm / Round 

13/16” 53 5/8” 

T 218 239 25.4 mm / 1912 mm / Round 

1” 75 2/7” 

T 219 200 30 mm / 1600 mm / Round 

1 3/16” 63” 

T 220 218 31.8 mm / 1744 mm / Round 

1 1/4” 68 5/8” 

T 221 223 31.8 mm / 1784 mm / Round 

1 1/4” 70 1/4” 

78 




T 223 103 24 mm / 981.1 mm / Round 

15/16” 38 5/8” 

T 224 104 24 mm / 990.6 mm / Round 

15/16” 39” 

T 226 155 24 mm / 1240 mm / Round 

15/16” 48 5/6” 

T 227 124 26 mm / 1181.1 mm / Round 

11/32” 46 1/2” 

T 228 135 25.4 mm / 1080 mm / Round 

1” 42 1/2” 

T 229 123 19 mm / 1171.6 mm / Round 

3/4” 46 1/8” 

T 230 124 29 mm / 1181.1 mm / Round 

1 9/64” 46 1/2” 

T 232 123 29 mm / 1171.6 mm / Round 

1 9/64” 46 1/8” 

T 233 127 24 mm / 1016 mm / Round 

15/16” 40” 

T 234 123 19 mm / 1171.6 mm / Round 

3/4” 46 1/8” 

T 235 121 21.1 mm / 968 mm / Round 

13/16” 38 1/9” 

T 236 117 21.1 mm / 936 mm / Round 

13/16” 36 6/7” 

T 237 159 25.4 mm / 1272 mm / Round 

1” 50” 


3/4” 35 1/4” 

T 240 193 36 mm / 1544 mm / Round 

1 3/7” 60 4/5” 

T 241 97 19 mm / 923.9 mm / Round 

3/4” 36 3/8” 


1” 51 3/8” 

T 244 112 24 mm / 1066.8 mm / Round 

15/16” 42” 

T 245 112 29 mm / 1066.8 mm / Round 

1 9/64” 42”




T 246 150 29 mm / 1428.7 mm / Round 

19/64” 56 1/4” 

T 247 126 26 mm / 1200.1 mm / Round 

1 1/32” 47 1/4” 

T 248 155 32 mm / 1240 mm / Round 

1 1/4” 48 7/8” 

T 249 133 25.4 mm / 1266.8 mm / Round 

1” 49 7/8” 

T 251 228 31.8 mm / 1824 mm / Round 

1 1/4” 71 4/5” 

T 252 148 23 mm / 1409.7 mm / Round 

48/53” 55 1/2” 

T 254 211 30 mm / 1688 mm / Round 

1 3/16” 66 1/2” 

T 255 202 30 mm / 1616 mm / Round 

1 3/16” 63 5/8” 

T 256 154 29 mm / 1466.8 mm / Round 

1 9/64” 57 3/4” 

T 257 211 32 mm / 1688 mm / Round 

1 1/4” 66 1/2” 

T 258 131 25.4 mm / 1247.8 mm / Round 

1” 49 1/8” 

T 259 187 32 mm / 1496 mm / Round 

1 1/4” 46 1/2 “ 


5/7” 46 1/2” 

T 263 192 24 mm / 1828.8 mm / Round 

15/16” 72” 

T 264 108 25.4 mm / 1028.7 mm / Round 

1” 40 1/2” 

T 265 146 28 mm / 1390.6 mm / Round 

1 1/8” 31 1/2” 

T 266 125 22 mm / 1000 mm / Round 

7/8” 39 3/8” 

T 267 201 30 mm / 1608 mm / Round 

1 3/16” 63 1/3” 

T 270 152 28 mm / 1447.8 mm / Round 

1 1/8” 57” 



T 271 191 36 mm / 1528 mm / Round 

1 3/7” 60” 

T 272 89 25.4 mm / 847.7 mm / Round 

1” 33 3/8” 

T 273 200 34 mm / 1600 mm / Round 

1 5/16” 63” 

T 276 131 22.3 mm / 1247.8 mm / Round 

7/8” 49 1/8” 

T 277 281 30 mm / 2248 mm / Round 

1 3/16” 88 1/2” 

T 278 111 25.4 mm / 1057.3 mm / Round 

1” 41 5/8” 

T 279 197 24 mm / 1876.4 mm / Round 

15/16” 73 7/8” 

T 280 69 15 mm / 552 mm / Round 

19/32” 21 3/4” 

T 281 168 25.4 mm / 1344 mm / Round 

1” 53” 

T 282 105 22 mm / 1000.1 mm / Round 

7/8” 39 3/8” 

T 283 99 25.4 mm / 943 mm / Round 

1” 37 1/8” 

T 284 113 25.4 mm / 1076.3 mm / Round 

1” 42 3/8” 

T 285 225 30 mm / 1800 mm / Round 

1 3/16” 70 6/7” 

T 286 197 26 mm / 1576 mm / Round 

1 1/32” 62” 

T 287 195 32 mm / 1560 mm / Round 

1 1/4” 61 3/7” 

T 288 116 29 mm / 928 mm / Round 

1 9/64” 36 1/2” 

T 289 107 25.4 mm / 856 mm / Round 

1” 33 5/7” 

T 292 147 25.4 mm / 1176 mm / Round 

1” 46 3/16” 

T 294 129 25.4 mm / 1228.7 mm / Round 

1” 48 3/8” 


79




T 295 201 30 mm / 1608 mm / Round 

1 3/16” 63 1/3” 

T 296 138 23 mm / 1104 mm / Round 

48/53 43 1/2” 

T 297 253 30 mm / 2024 mm / Round 

1 3/16” 79 2/3” 

T 298 211 34 mm / 1688 mm / Round 

1 5/16” 66 1/2” 

T 299 119 19 mm / 1133.5 mm / Round 

3/4” 44 5/8” 

T 300 98 19 mm / 933.4 mm / Round 

3/4” 36 3/4” 


1” 52 7/8” 

T 302 154 21.5 mm / 1232 mm / Round 

6/7” 48 1/2” 

T 303 191 31.8 mm / 1528 mm / Round 

1 1/4” 60 1/6” 

T 304 223 27 mm / 1784 mm / Round 

1 1/16” 70 1/4” 

T 305 171 24 mm / 1368 mm / Round 

15/16” 53 6/7” 

T 306 150 23 mm / 1200 mm / Round 

48/53” 47 1/4” 

T 307 223 27 mm / 1784 mm / Round 

11/16” 70 1/4” 

T 308 123 21.5 mm / 986.5 mm / Round 

6/7” 38 5/6” 

T 309 169 24 mm / 1352 mm / Round 

15/16” 53 1/4” 

T 313 175 29 mm / 1401.8 mm / Round 

1 9/64” 55 1/5” 

T 314 65 12.7 mm / 520.7 mm / Round 

1/2” 20 1/2” 

T 315 207 32 mm / 1656 mm / Round 

1 1/4” 65 1/5” 

T 316 133 25.4 mm / 1064 mm / Round 

1” 41 8/9” 

80 




T 317 153 25.4 mm / 1224 mm / Round 

1” 48 1/5” 

T 318 137 22 mm / 1096 mm / Round 

7/8” 43 1/7” 

T 319 146 28 mm / 1390.6 mm / Round 

1 1/8” 31 1/2” 

T 320 201 32 mm / 1608 mm / Round 

1 1/4” 63 1/3” 


1” 52 7/8” 

T 322 251 32 mm / 2008 mm / Round 

1 1/4” 79 1/20” 

T 323 259 32 mm / 2072 mm / Round 

1 1/4” 81 4/7” 

T 324 110 22 mm / 881.1 mm / Round 

7/8” 34 11/16 “ 

T 328 281 30 mm / 2248 mm / Round 

1 3/16” 88 1/2” 

T 329 197 20 mm / 1576 mm / Round 

4/5” 62” 

T 330 281 30 mm / 2248 mm / Round 

1 3/16” 88 1/2” 

T 331 142 23 mm / 1352.5 mm / Round 

48/53” 53 1/4” 

T 332 122 20 mm / 1162 mm / Round 

4/5” 45 3/4” 

T 333 120 30 mm / 1143 mm / Round 

1 3/16” 45” 

T 334 148 23 mm / 1184 mm / Round 

48/53” 46 5/8” 

T 335 127 25.4 mm / 1209.7 mm / Round 

1” 47 5/8”

Timing belt removal and installation instructions 

Included with SKF timing belt kits are detailed installation instructions to help you get the job done 

quickly and correctly. The instructions include helpful diagrams specific to the vehicle and type of kit 

required. 

Figure 1 Figure 2 

Typical timing belt removal 

• Disconnect battery leads. 

• Remove belts and other items as 

required to gain access to timing belt. 

• Clamp flywheel, then remove 

crankshaft pulley 

• Remove timing cover(s). 

• Bring engine to timing position. Check 

alignment of all timing marks, timing holes 

(fit timing pins), and the like. In particular, 

check alignment of following timing marks 

with the appropriate fixed timing markers 

on engine housing: crankshaft sprocket 

(a), or flywheel; camshaft sprocket (b), or 

auxiliary shaft sprocket, where fitted; injection 

pump sprocket (d) (see Fig. 3 on following 

page). Note: A diesel engine is shown in this 

illustration. 

• Remove timing belt – remove 

tensioning pulley and/or idler pulley, 

as necessary – refer to Fig. 2, 3 or 4. 

(See following page.) 

81

Typical timing belt installation 

• Fit new idler pulley (3), and/or new 

tensioning pulley (2), in disengaged position, 

as necessary. (Refer to Fig. 3) 

• Fit new timing belt (1). Make sure arrows 

on belt point in correct direction and that 

any timing marks align with those on 

sprockets. (Refer to Fig. 3) 

• Some applications require that the water 

pump (e) is used to adjust belt tension. 

(Refer to Fig. 4) 

• Tighten belt by rotating tensioning 

pulley (2) or water pump (e). Refer to 

Fig. 3 & 4. Tighten bolts on tensioning 

pulley (2) temporarily or water pump (e). 

• Turn engine clockwise through two full 

turns (2 x 360º), bringing it back to timing 

position. 

Figure 3 

The first sign of wear is “noise.” 

A tensioner that sounds bad usually is bad. While the engine is running, listen by the front of the engine 

for any noise coming from the tensioner. If there is: 

• Check for pulley bearing failure, which 

accounts for about half of all tensioner 

failures. 

• Misalignment can also cause the belt to 

wear unevenly and fail early. 

82 

• Check alignment of all timing marks, 

timing holes (fit timing pins) and the like. 

• Fit belt tension tester and check that tension 

matches recommended value, then tighten 

nut of tensioning pulley (2) or bolts of water 

pump (e) to recommended torque. (Refer to 

Fig. 3 & 4.) 

• Refit timing cover. 

• Clamp flywheel, then refit crankshaft pulley 

and tighten bolt to recommended torque. 

• Refit and tighten all belts previously 

removed. 

• Refit battery cables. 

Figure 4 

• Check for roughness feel when rotating 

bearing 

• Side play (rocking)

Troubleshooting and failure analysis 

Failure during vehicle operation is a serious matter. To resolve belt failure, determine cause of failure before replacing 

with a new belt. This will maximize the capability of the belt and extend its life. 

Also replace timing belt with the same size and tooth profile to avoid engine damage. 

The following is an introduction to belt failure main causes. 

Please check the items in this table when failure occurs. 

For Timing Belts 

Symptom/Appearance Probable cause Corrective action 

• Poor alignment ..................................................Adjust the alignment 

Abnormal side wear • Base not adequately fixed ................................Strengthen the base fixture 

• Bending of the pulley flange ............................Correct 

Abnormal wear at tooth surface where • Overload .............................................................Check for correct belt roller profile 

pressure is being exerted • Overstretched belt.............................................Adjust the initial tension of the belt 

Abnormal wear at contact point of • Overstretched belt.............................................Adjust the initial tension of the belt 

pulley area • Defective pulley tooth form .............................Replace with correct pulley paying special 

attention to the profile of the pulley tooth 

• Pulley diameter too small ................................Check for correct pulley 

Tooth damage • 6 teeth or less for T.I.M ....................................Check for correct pulley 

• Exertion of shock load ......................................Ensure that shock is not exerted on the belt 

• Overload .............................................................Change the system for proper 

tensioner adjustment 

Breaking of tensile body • Drop in elasticity or corrosion of 

tensile body ........................................................Check the storage condition and 

condition of the belt 

• Exertion of shock load ......................................Ensure that shock is not exerted on the belt 

Crack at the back side • Usage under -30°C (-22°F) ............................Raise the surrounding temperature 

• Pulley diameter too small ................................Check for correct pulley 

Thermal aging of rubber / polyurethane • Temperature of 80°C (176°F) and 

above at the rubber / polyurethane ...............Reduce the surrounding temperature 

Swelling of the rubber • Oil contamination ..............................................Use polyurethane or oil resistant rubber 

belt, check for seal leaks and correct 

• Overload .............................................................Change for proper tension 

Abnormal wear at pulley tooth • Overstretched belt.............................................Adjust the initial tension of the belt 

• Pulley life ............................................................Change to a new pulley 

Wear at pulley edge • Overstretched belt.............................................Change to new pulley and belt while 

(Tensile body can be seen underneath loosening the tension 

the belt) 

• Poor alignment ..................................................Adjust the alignment 

• Overstretched belt.............................................Adjust the initial tension of the belt 

Abnormal operation sounds • Overload .............................................................Check the system design 

• Pulley diameter too small ................................Check the system design 

• Defective pulley tooth form .............................Ensure that pulley tooth profile is correct 

83

Belt life vs. correct tension 

Belt tension 

84 

Chord ripping 

Correct 

tension 

Flank wear 

Ripping of teeth 

Tooth jump 

Life of belt 

Normal wear 

As this graph shows, the 

correct tension is critical to the 

life of the belt. Both excessive 

and insufficient tension can 

damage the belt and cause 

premature failure. 

General hints 

• Lock engine cams using correct tools to prevent slippage and movement. Do not use the teeth of the 

belt to block the engine when loosening or tightening the pulley bolts. 

• Do not use solvents to clean the pulleys. 

• Check that the auxiliary components controlled by the timing system (water pump, etc) are functioning 

correctly. If in doubt, recommend a change to the customer while making the repair. 

• Check for wear on the flanges. Rotate the driving shaft to the TDC of cylinder number 1; in the case of 

an engine with a double camshaft, assure that both are in the TDC position.

Analyzing belt wear and damage 

A broken belt is frequently the result of a problem with the system of pulleys and bearings. 

Therefore, it can be helpful to note the cause of belt breakage or wear and take steps to correct 

the problem. 

Important: Never install a used timing belt. Always install a new belt along with new 

idler pulleys and tensioners for optimum safety and performance. 

Problem: Torn or broken belt with ragged, 

jagged cord 

Probable cause: Excessive fitting tension 

Problem: Completely detached or worn teeth 

Probable cause: Either excessive or insufficient 

belt tension 

Problem: Back of belt is cracked 

Probable cause: Incorrect temperature, old belt 

Problem: Oil contamination on belt 

Probable cause: Contamination from oil or 

other petroleum derivatives 

Problem: Excessive noise 

Probable cause: Incorrect tension 

Problem: Belt exhibits tooth shear 

Probable cause: Insufficient belt tension 

Problem: Hollowed teeth 

Probable cause: Insufficient belt tension 

Problem: Land wear 

Probable cause: Excessive belt tension 

Problem: Visible wear on edge of belt 

Probable cause: Misaligned pulleys and/or 

tensioner 

85


86 

For all other components 

Symptom/Appearance Probable cause Corrective action 

The plastic idler pulley appears • Extreme environmental wear Replace 

to be worn on belt tracking area (i.e., heat, water, stones) 

On plastic idlers, pulley has a chip in it • Stone damage Replace 

• Faulty installation practices 

Tensioner bearing has been • Stone damage Replace 

marred in belt tracking area • Faulty installation practices 

Tensioner bearing shows signs • Coating on pulley has worn off Replace 

of corrosion Note: it is normal for coating 

to wear off belt tracking area 

Bearing has excessive wobble (free rock) • Bearing failure Replace 

• Excessive load on pulley 

• Belt is not tracking properly over pulley 

Bearing Appearance Probable cause Corrective action 

Grease appears to be • Seal degradation. Replace 

leaking out of the bearing • Excessive radial internal clearance in brg. 

Bearing seal is missing or damaged • Worn pulley Replace 

• Environmental damage 

(i.e., heat, water, stones) 

Bearing seal looks damaged. • Faulty installation practices Replace 

• Environmental damage 

(i.e., heat, water, stones) 

Loose, sticking or seized pulley Probable cause Corrective action 

Tensioner bearing is seized and will not • Bearing is damaged Replace 

rotate freely 

Tensioner bearing does not rotate smoothly • Radial internal clearance in brg. is too low Replace 

or has a sticky feel to it when spun • Bearing fit in pulley is tight 

Pulley and bearing have relative motion • This signifies the bearing is Replace 

not being constrained 

Noise Probable cause Corrective action 

Bearing makes a high pitched whine or • Worn bearing Replace 

hooting noise after the engine is started • Bearing fit is incorrect 

Noise lasts up to three minutes 

Bearing makes a high pitched whine • Bearing is not functioning properly Replace (During normal operation, 

in operation bearing is very quiet) 

Bearing assembly rattles when shaken • Bearing cage is broken Replace 

• Balls in bearing are loose 

• Bearing is void of lubricant 

Tracking Probable cause Corrective action 

Belt does not track properly • Bearing is not fixed to the correct Replace 

on idler belt tracking surface depth in pulley 

• Belt tracking surface is not square 

to bearing mounting surface 

• Pulley tracking surface is tapered 

(Crowning or bowing of belt tracking 

surface is sometimes intentional)


Heavy damage on pulley flange from impact 

of foreign object or poor installation practice. 

Pollution of belt fibers inside of pulleys– 

material from belt has overtime gone into 

workings of bearing unit and caused failure. 

Excessive corrosion/material leading to 

ingress of contamination past the seal, 

causing premature failure. 

Heavy damage on the second face of idler 

and bearing seal, probably caused by an 

external element coming in contact with the 

pulley during running. 

Significant traces on the plastic pulleys of 

impact damages by foreign objects. 

Significant traces on the plastic pulleys of 

impact damages by foreign objects. 

87


Belt cover plate not mounted correctly. Object has entered timing system. 

Belt running off center of belt edge. Guidewall damage causing roughness and 

fraying. 

Impact damage on bearing due to wrong 

fitting onto block. 

88 

Excessive corrosion and damage. Bearing life 

expired. Should have been changed earlier.

Good practices and helpful hints 

Example of correct and wrong way to mount tensioner. 

Positioning screw 

Correct set-up 

Correct way 

All components are used: spacer washers / nuts / 

springs. Important: nuts and screws are torqued 

to the recommended levels. 

Incorrect way 

Wrong positioning of unit: the location lug 

(at 3 o’clock in the bottom photo) should be 

secured in correct location. 

89

Setting up automatic tensioners: a typical example 

Timing belt tensioner 

1. Allow the engine and tensioner to stabilize to the 

same relative ambient temperature before installing a 

tensioner for proper belt tension adjustment. Do not 

attempt to install a cool tensioner onto a hot engine or 

vise versa. 

2. Rotate both the crankshaft and camshaft clockwise to 

TDC (top dead center) position (i.e. #1 cylinder firing 

position) and remove the timing belt. This defined 

position is to be the position where there is no action 

(positive or negative) from the camshaft or other 

sprockets. One should find no sudden movement or 

abrupt action from either of the sprockets. 

90 

Generally, cam and crankshaft sprockets have to line 

up with equivalent markings on the engine block to 

indicate TDC. 

Initial setup of the TBT (timing belt tensioner) 

3. Place a new tensioner onto the engine. Tensioner’s 

anti-rotation fingers should fit over the guiding nut on 

the engine. 

4. Rotate the installation shaft washer until the hex hole 

is pointing at the 5 o’clock position then hand tighten 

the M8 mounting bolt (see Figure 1). 

Hand tighten 

mounting bolt 

Figure 1 

Pointer in 

free arm position 

Hex hole 

Guide nut 

Installation of the TBT 

5. Install the timing belt being careful to engage the 

appropriate teeth of all the corresponding sprockets 

as per drive layout (see Figure 2). (Caution: Do not 

disturb the position of the crankshaft or camshaft 

sprockets during this procedure.) 

Anti rotation 

fingers 

Figure 2 

Installation 

washer plate 

Tensioner 

Water pump 

Camshaft 

Crankshaft

Setting up automatic tensioners: a typical example 

6. Rotate the installation shaft washer clockwise with 

a hex key. Make sure to hold the mounting bolt with 

a wrench in order to prevent it from turning when 

rotating the installation shaft washer. The tensioner 

assembly will move against the belt and the arm will 

eventually start to move clockwise (see Figure 3). 

Figure 3 

Spanner/Wrench 

Hexagonal key 

Mounting bolt 

Hexagonal key 

Mounting bolt 

Spanner/Wrench 

Figure 4 

Nut torque 

19±3 Nm 

7. Continue rotating the installation shaft washer until 

the arm pointer is positioned within the nominal 

position window on the base plate, then lock the 

tensioner in this position by tightening the mounting 

nut with 19±3 Nm or torque (see Figure 4). 

Verification of the nominal position 

8. Remove both the hex key and the wrench. Rotate the 

crankshaft two (2) complete revolutions manually 

for proper seating of the belt until the crankshaft is 

repositioned at the TDC position. 

Note: Repositioning the crankshaft to the TDC position 

must be done only during the clockwise rotation. 

9. Check the position of the arm pointer. 

- If the arm pointer still remains within the nominal 

position window, the installation is complete. 

- If not, go to step #10. The installation needs to be 

repeated until the proper position is achieved. 

Readjustment 

10. Engage the hex key and retain its position while 

loosening the mounting bolt with the wrench. The 

mounting bolt and the tensioner do not need to 

be removed. Rotate the installation shaft washer 

counterclockwise with the hex key until the arm 

pointer returns to the free-arm position (see Figure 

1). Follow steps 5 through 9. 

Pointer in 

installed position 

Final setting 

tolerance 

91

SKF Bearings SKF Bearings (cont.) 

Part No. Application Part No. Application 

TBK014P 

Engine (Timing Belt and Tensioner Kit) 

FORD RWD 1992-74, FORD TRK 1994-77, 

TBK104P� Engine (Timing Belt and Tensioner Kit) 

INFINITI RWD 1992-90, 

MERCURY RWD 1986-83 

MERCURY FWD 1996-93, 

TBK017P� 


AMC 1979-77, AUDI 1990-81, 

NISSAN 1994-84, NISSAN TRK 

1994-87 

DODGE FWD 1983-80, 

TBK114P Engine (Timing Belt and Tensioner Kit) 

PLYMOUTH FWD 1979-78, VOLKSWGN 

CHRY FWD 1987-86, 

1980-76 

DODGE FWD 1987-86 

TBK032P� 


VOLVO 1992-76 

TBK117WP 

TBK122P� 


MAZDA 1987-86 


TBK036P� 


ISUZU TRK 1995-86, 

MITSU 1987-85 

TOYOTA 1992-89, GEO 1992-89 

TBK124AP� Engine (Timing Belt and Tensioner Kit) 

TBK041P� 


HONDA 1979-76 

TBK124P� 

MITSU 1987-85 


DODGE TRK 1992-90, 


AUDI 1983-82, VOLKSWGN 1981-77 

TBK128P� 

HYUNDAI 1991-89, MITSU 1990-87 



DODGE CAN. 1990-89, EAGLE 

TBK067AWP� Engine (Timing Belt and Tensioner Kit) 

MERCURY FWD 1991 

1990-89, EAGLE CAN. 1990-89, 

HYUNDAI 1994-90 

TBK067BWP� 

TBK067WP� 

TBK070P� 

TBK071P 

TBK073P� 


FORD FWD 1991-86 




CHEV FWD 1988-85, 

TOYOTA 1990-82 


CHRY FWD 1988-82, 

DODGE FWD 1988-81, DODGE TRK 

1988-85, FORD TRK 1988-83, 

PLYMOUTH FWD 1987-84 



HYUNDAI 1989-86, MITSU 

1986-85, PLYMOUTH FWD 1982-80 

TBK129WP� 

TBK130WP� 

TBK131P� 

TBK132P 

TBK134WP� 

TBK135P 

TBK139WP� 


ACURA 1990-86, 

STERLING 1991-87 


ACURA 1989-86 


BMW PASS CAR 1993-88 


CHRY FWD 1988, DODGE FWD 

1988, PLYMOUTH FWD 1988 


FORD FWD 1992-90, 

MAZDA 1992-88 


SUBARU 1994-87 



CHRY FWD 1995-88, 


DODGE FWD 2000-87, DODGE TRK 

DODGE CAN. 1991, NISSAN 1982, 

1991-87, HYUNDAI 1998-90, MITSU 1988 

TBK078AP� 

NISSAN CAN. 1988-86 



MAZDA 1990-89 

TBK078P� 

NISSAN 1987-84 


TBK142WP� Engine (Timing Belt and Tensioner Kit) 

HONDA 1991-88 

NISSAN 1988, 

NISSAN CAN. 1988-86 


HONDA 1995-88 

TBK081AWP Engine (Timing Belt and Tensioner Kit) 

BUICK FWD 1988-87, 


HONDA 1990-88 

PONTIAC FWD 1989-87 


TBK081WP Engine (Timing Belt and Tensioner Kit) 

HONDA 1991-88 

BUICK FWD 1986-82, 



MAZDA 1991-88 

TBK087WP 

Engine (Timing Belt and Tensioner Kit) TBK147P� Engine (Timing Belt and Tensioner Kit) 


HONDA TRK 1996-94, 

ISUZU TRK 1997-88 




SUZUKI 1994-86 




TBK101P� 


92 


CHRY FWD 1994-89, 

DODGE FWD 1995-89, DODGE TRK 1995-89 

� Interference engine for most applications 

Passenger cars, light & medium trucks


SKF Bearings (cont.) SKF Bearings (cont.) 


TBK154WP� 


TOYO TRK 1992-88 


DODGE CAN. 1990-89, 

EAGLE CAN. 1992-91 


LEXUS FWD 1991-90 



DODGE TRK 1989-87, MITSU 1988-84, 

MITSU TRK 1989-87 


MITSU 1988-87 


HONDA 1989-84 


HONDA 1987-86 


CHEV FWD 1988-85, 

ISUZU 1989-85 




PONTIAC FWD 1990 


SUZUKI 1989 


HYUNDAI 1992 


HYUNDAI 1995-93, 

MITSU 1992-89 


GEO 1993-89, 

PONT. CAN. 1991-88 


MITSU 1999-95 


EAGLE 1994-90, EAGLE 

CAN. 1993-91, HYUNDAI 1998-92, 

MITSU 1994-89, 



AUDI 1991-89 






VOLVO 1992-89 




GEO 1993-90, ISUZU 1993-91 


DAIHATSU 1992-88 


FORD FWD 1996-91, KIA 1997-95, 

MAZDA 2002-90, MERCURY FWD 

1996-91 


MAZDA 1991-90 


MAZDA 1995-92 


ACURA 1991-90 


ACURA 1999-90, 

HONDA CUV 2001-97 


FORD FWD 1997-90, KIA 1995-94, 

MAZDA 1994-90 


HONDA 1997-90, 



LEXUS RWD 1997-90 



DODGE CAN. 1995, EAGLE 

1995-91, EAGLE CAN. 1992, 

HYUNDAI 1999-94, 

MITSU 1996-90 


CHEV FWD 1995-91, OLDS 

FWD 1995-91, PONTIAC FWD 1995-91 

TBK193P� 


ACURA 1998-91 


CHEV FWD 2001-98, GEO 1997-96, 

PONT CAN. 2000-96, SUZUKI 

2001-98 


FORD FWD 1996-91, 

MERCURY FWD 1996-91 



MITSU 1999-91 


TOYOTA 2001-87, TOYOTA 

CUV 2000-96 


LEXUS FWD 1993-92 



MITSU 2006-02 


MITSU 2006-92 




EAGLE 1992, MITSU 1992, 

PLYMOUTH FWD 1992 




FORD RWD 1993, 

FORD TRK 1994-92, 

MAZDA TRK 1994 


ACURA 1994-92 


TBK212P� 


ACURA 1998-95 


CHEV TRK 2002-98, GEO 1997-94, 


93



TBK214P Engine (Timing Belt and Tensioner Kit) TBK241P� Engine (Timing Belt and Tensioner Kit) 

FORD FWD 1997-93, 

GEO 1995-94, 

MAZDA 2002-92 

PONT CAN 1995-94 

TBK215P� Engine (Timing Belt and Tensioner Kit) TBK242P� Engine (Timing Belt and Tensioner Kit) 

LEXUS RWD 2004-92, 


TBK244WP� 

VOLKSWGN 1998-93 



ACURA 1999-97, HONDA 2002-94, 

HONDA 1996-92 


TBK217WP� Engine (Timing Belt and Tensioner Kit) TBK245AWP� Engine (Timing Belt and Tensioner Kit) 

VOLVO 1994-92 

CHRY FWD 2000, 



AUDI 1998-96 

TBK245BWP� Engine (Timing Belt and Tensioner Kit) 

TBK218BWP� Engine (Timing Belt and Tensioner Kit) 

CHRY FWD 2000, 

AUDI 1995-92 


TBK219WP Engine (Timing Belt and Tensioner Kit) TBK245WP� Engine (Timing Belt and Tensioner Kit) 

CHRY FWD 1994-93, 


DODGE FWD 1994-93, EAGLE 1994-93 


TBK220P� Engine (Timing Belt and Tensioner Kit) TBK246WP� Engine (Timing Belt and Tensioner Kit) 

ISUZU TRK 1995 

CHRY FWD 1997-95, 


DODGE FWD 1997-95, EAGLE 1997-95, 

ACURA 2003-99, ACURA TRK 1997-96, 

MITSU 1999-95, PLYMOUTH FWD 1997-95 

HONDA TRK 1997-94, 



ACURA 2001-94 

TBK223WP� Engine (Timing Belt and Tensioner Kit) TBK248P Engine (Timing Belt and Tensioner Kit) 

HONDA 1995-92 


TBK224AWP� Engine (Timing Belt and Tensioner Kit) TBK249P� Engine (Timing Belt and Tensioner Kit) 

HONDA 2000-92 

INFINITI TRK 2000-97, 


MERCURY FWD 1998-93, 

HONDA 1998-94 

NISSAN 2001-93, NISSAN TRK 2001-94 

TBK226WP� Engine (Timing Belt and Tensioner Kit) TBK251P� Engine (Timing Belt and Tensioner Kit) 

HONDA 1999-93 

INFINITI RWD 1997-94, 



ACURA 1993-92, 


HONDA 1997-94 

VOLVO 1997-95 


FORD FWD 1997-93, 

VOLVO 2000-93 

MAZDA 2002-93 



SUBARU 1998-94, 


TOYOTA TRK 1992-88 

TBK230AP� Engine (Timing Belt and Tensioner Kit) TBK255WP Engine (Timing Belt and Tensioner Kit) 

EAGLE 1996-93, MITSU 1999-93, 

CHRY FWD 1997-95, 


DODGE FWD 1997-95, EAGLE 1997-95 


EAGLE 1995-93, 

MITSU 1994 

MITSU 1995-93 



LEXUS FWD 2006-02, 

MITSU 1993 

TOYOTA 2008-04, LEXUS HYBRID 2008-06, 


TOYOTA CUV 2007-01, LEXUS CUV 2006-04 




VOLVO 1995-93 

TBK258P 

LEXUS FWD 2001-94, 

TOYOTA 2000-94, LEXUS CUV 2000-99 



FORD FWD 1997-95, 

GEO 1997-93, TOYOTA 1997-94 

MERCURY FWD 2000-95 

TBK236P� 

TBK237P 

TBK239P 

TBK240AWP� 

TBK240WP� 


GEO 1997-93, TOYOTA 1997-93 




TOYOTA 1993 





TBK259AWP� 

TBK259WP� 

TBK262AP� 


CHRY FWD 2004-01, 

MITSU 2004-03 


CHRY FWD 2000-95, 


MITSU 2004-99, 




94 


Passenger cars, light & medium trucks




TBK262WP� Engine (Timing Belt and Tensioner Kit) TBK287WP� Engine (Timing Belt and Tensioner Kit) 


MITSU 2002-97, MITSU TRK 2002-97 


HONDA 1997-95 


MITSU 2002-97 

TBK264WP� 

TBK265AWP 

TBK265BWP 

Engine (Timing Belt and Tensioner Kit) TBK289P 

KIA CUV 1999-95, KIA TRUCK 1995 

Engine (Timing Belt and Tensioner Kit) TBK292P� 

CHRY FWD 2006-00, DODGE FWD 2007-97, 

JEEP 2006-02,PLYMOUTH FWD 2000-97 TBK294AWP� 


CHRY FWD 2006-97, DODGE FWD 2007-97, TBK294BWP� 

JEEP 2005-02, PLYMOUTH FWD 2000-97 


MITSU 1999-97 




FORD FWD 2002-99, MERCURY FWD 2002-99 


FORD FWD/CUV 2004-01, MAZDA CUV 2004-01 


CHRY FWD 1996-95, DODGE FWD 1996-95, 

PLYMOUTH FWD 1996 

TBK294WP� 

TBK295AWP� 





CHRY FWD 2009-05, CHRY CUV 2008-05 

TBK266P� 

TBK267P� 

TBK270AWP� 

TBK270BWP� 

TBK271WP� 

TBK272P� 

MAZDA 1998-95 


MAZDA 1998-95 


MAZDA 2002-95 


VOLVO 1999 


VOLVO 1998-95 




GEO 1997-95, PONT CAN. 1997-95, 


TBK295WP� 

TBK296WP� 

TBK297BWP� 

TBK298P� 

TBK299P 

TBK302WP� 

TBK303WP� 


CHRY FWD 2002-98, DODGE FWD 2002-98 




AUDI 2005-01, VOLKSWGN 2007-04 


LEXUS RWD 2007-98,LEXUS TRK 2007-98, 





KIA 2004-00 


ACURA TRK 1999-98, HONDA TRK 2002-98, 


TBK273P� 

TBK276P� 

TBK277AWP 

TBK277WP� 

TBK278P� 

TBK279P� 

TBK281WP� 

TBK282P� 

TBK283AP� 

TBK283WP� 

TBK284P� 

TBK285AP� 

TBK285BP� 


CHEV FWD 1997-96, OLDS FWD 1996, 

PONTIAC FWD 1996 


FORD TRK 2001-95, MAZDA TRK 2000-95 


SUBARU 1998, SUBARU CUV 1998 


SUBARU 1998-96, SUBARU CUV 1998 




ACURA 2000-96 


KIA TRUCK 1999-95 


HYUNDAI 1997-95, KIA 2006 








CADILLAC RWD 2001-99 


TBK308P� 

TBK313P� 

TBK315WP� 

TBK316WP� 

TBK317WP� 

TBK318WP� 

TBK320WP� 

TBK321WP 

TBK322WP� 

TBK323WP� 

TBK324P� 

TBK329WP� 

TBK331WP� 

TBK332AWP� 


MAZDA 2001-99 


HYUNDAI 2005-01, HYUNDAI CUV 2005-01 


HYUNDAI 2006-99, KIA 2005-01, 

KIA CUV 2007-05, HYUNDAI CUV 2007-01 


MAZDA 2000-99 


AUDI 2000-97, VOLKSWGN 2001-98 


KIA 2002-01 






HYUNDAI 2001 


HYUNDAI 2005-02, KIA 2006-04, 

HYUNDAI CUV 2006-03 




ACURA 2007-03 HONDA 2007-03, 

SATURN CUV 2007-04 


VOLVO 2005-00 


MITSU 2006-04, MITSU CUV 2006-04 

TBK285P� 

SATURN 2005-01, SATURN CUV 2003-02 


CADILLAC RWD 1998-97, SAAB 1997-94 

TBK332WP� 

TBK333WP 


MITSU 2007-04 



TBK286WP� 


ACURA 2002-97, ACURA TRK 2002-01 

HONDA 2002-98, HONDA CUV 2003 

TBK334P 

TBK335WP 


AUDI 2009-05, VOLKSWGN 2008-06 


CHEV FWD 2008-04,PONT 

CAN. 2007-05, SUZUKI 2005 


95

WARNING! 

Proper selection of the products listed for sale in this catalog is essential to minimize the risk of any seal, 

bearing or other product failure. Such failures can result in property damage or severe personal injury 

to operators of machinery, vehicles or to others. You must carefully evaluate the particular application 

on or into which you intend to install the products. Products in this catalog require installation by an 

experienced professional mechanic or qualified maintenance professional. 

The product properties and operating parameters described in this catalogue are based upon tests conducted by SKF or reported 

by others. SKF does not assume any responsibility for errors in the data published in this catalog. The life and performance of 

the products ultimately depend on a number of factors. These include, for example, selection of product design type, selection of 

materials for their different properties, handling and installation, operating conditions, including shaft surface or bore conditions, 

the quantity, quality and chemistry of lubricants and other factors. Severe environments can adversely affect product life or 

performance. For help in realizing longer SKF product life, and optimal performance for your specific application, contact SKF’s 

Customer Services Department at 1-800-882-0008. 

LIMITED WARRANTY 

SKF warrants to the first purchaser that the products sold by it, when properly installed, will be free from defects in material and 

workmanship. SKF’s sole obligation and liability for any defect found to exist contrary to this limited warranty in a product sold by 

SKF, and purchaser’s sole and exclusive remedy for such defect, shall be limited to: (A) SKF furnishing without additional charge 

to purchaser, including transportation, a replacement for any of the products sold by SKF which are found by SKF to be defective 

contrary to this limited warranty, and (B) in the case of products which cannot be repaired or replaced by SKF, SKF shall credit 

or refund to purchaser the purchase price paid therefore; provided, that SKF must be advised in writing of any product nonconformance 

within thirty (30) days of the date of the discovery thereof, and the non-conforming product must be returned f.o.b. 

to SKF’s designated warehouse promptly, but in no event after the expiration of the warranty period applicable to the product as 

follows: Products are warranted by SKF for a period of twelve (12) months from the date of purchase, except for light duty hub 

bearing units, which are warranted for a period of thirty-six (36) months from the date of purchase, or 45,000 miles (72,000 

kilometers), which ever occurs first. Valid proof of purchase date/mileage required. In no event shall SKF be obligated under this 

limited warranty or otherwise in any way whatsoever for normal wear and tear, or for any products sold by SKF which, after 

delivery by SKF and in SKF’s sole determination, have been subjected to accident, abuse, misapplication, improper or faulty repair or 

installation, improper or faulty maintenance or lubrication, any alteration or neglect, excessive loading or other excessive operating 

conditions, or for defects caused by or resulting from purchaser’s specifications or designs or otherwise caused by purchaser. TO 

THE FURTHEST EXTENT PERMITTED UNDER APPLICABLE LAW, SKF DISCLAIMS LIABILITY, IN TORT OR CONTRACT, IN 

NEGLIGENCE, STRICT LIABILITY, OR OTHERWISE, FOR ANY OTHER REMEDY OR DAMAGE, WHETHER DIRECT OR INDIRECT, 

INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL WITH RESPECT TO ITS PERFORMANCE HEREUNDER, INCLUDING 

WITHOUT LIMITATION THE PRODUCTS SOLD OR PROVIDED HEREUNDER BY SKF, AND ITS PROVISION OF ANY RELATED 

SERVICES. THIS LIMITED WARRANTY IS TO THE EXCLUSION OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, 

INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. COSTS INCURRED FOR 

ROUTINE MAINTENANCE ARE NOT COVERED BY THIS LIMITED WARRANTY. Without limiting the generality of the foregoing, 

SKF specifically disclaims liability to purchaser for any loss, cost, or damage incurred as a result of equipment downtime, or loss of 

use or availability of worksite, lost revenues or lost profits, regardless of whether SKF is on notice of the possibility of such damage 

or loss and did or could have anticipated same. No other person has been authorized by SKF to undertake or make on behalf of SKF 

any further representation, warranty or guarantee in addition to or contrary to this limited warranty or contrary to the limitations 

and disclaimers provided herein. The exclusive remedies provided in this limited warranty shall not be deemed to have failed of their 

essential purpose so long as SKF is willing and able to perform to the extent and in the manner prescribed in this limited warranty. 

SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR 

LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY 

TO YOU. This limited warranty gives you specific legal rights, and you may also have other rights, which vary state to state. 

INFORMATION AND RETURNS: This catalog refers to products as 

designed prior to its publication, and does not cover product changes 

made after its publication date. Inquiries can be directed to: SKF 

Customer Service Department, 890 North State Street, Suite 200, 

Elgin, IL 60123, or call 1-800-882-0008. Any error in shipment 

(for over-shipments in the quantity of product or for product not 

matching purchaser’s description given in its order) is returnable for 

credit or replacement by SKF, provided that SKF is advised in writing 

by purchaser of such non-conformance within 30 days after the 

product’s delivery to purchaser, and only after written authorization 

therefore is given by SKF. Approved returns must be shipped freight 

prepaid and arrive in good, saleable condition to qualify for credit 

or replacement. SKF shall not otherwise be obligated to accept the 

return of any products sold or distributed by it. 

NOTICE: The SKF part numbering systems for the SKF products 

are proprietary to SKF. Any improper or unauthorized use of 

these numbering systems, including adoption or use of any of 

their part numbers or part number lists, even where the subject of 

modification or addition, is strictly prohibited and will be prosecuted 

by SKF as a violation of U.S. and foreign copyright, trademark and 

unfair competition laws. In addition, use of any SKF trademarks, 

trade names or packaging schemes, systems, colors or designs is 

likewise considered a violation of the trademarks, trade names and 

trade identities rights of SKF USA Inc. and their affiliates. Possible 

violation of such use should be brought to the attention of SKF: 

SKF USA Inc., 890 North State Street, Suite 200, Elgin, Illinois 

60123, Attn: Catalog Manager.

The Power of 

Knowledge Engineering 

Automotive technicians worldwide are installing confidence – and 

building long-term customer loyalty – with high quality SKF brand 

components. Our expanding product line includes wheel bearing kits 

and unitized hubs, transmission rebuild kits, seals, timing belt kits, 

SPEEDI-SLEEVE shaft repair kits and more. Broad market coverage 

and world-class logistics assure the right part, at the right place, 

at the right time. For more information about all the ways we can 

help you install confidence in your customers, too, contact your SKF 

distributor. Or visit us online: www.vsm.skf.com.

The Power of Knowledge Engineering 

SKF is your source for a wide range of products covering 

various industries. From automotive to heavy duty to 

industrial applications, SKF offers a solution to keep your 

machines operating and your business profitable. 

To receive updates and news from 

SKF, please email: 

vsm.updates@skf.com 

For catalog related questions, 

please email: 

vsm.catalogs@skf.com 

For more information, please contact 

your local SKF representative at 

1-800-882-0008 or visit us at 

www.vsm.skf.com. 

SKF VSM NA 

890 N. State Street 

Suite 200 

Elgin, IL 60123 

® SKF is a registered trademark of the SKF Group. 

© SKF Group 2010 

The contents of this publication are the copyright of the publisher and may not be reproduced 

(even extracts) unless permission is granted. Every care has been taken to ensure the 

accuracy of the information contained in this publication but no liability can be accepted for 

any loss or damage whether direct, indirect or consequential arising out of the use of the 

information contained herein. 

Printed in U.S.A.

SKF Timing Belt Kits - SKF.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?