Brochure: Carbon Additives for Polymer Compounds - Timcal Graphite

the product
EnSACo® Conductive Carbon Black
for polymer compounds
TYpICAL vALuES
6
pRopERTY TEST METHod unIT EnSACo® 150 G EnSACo® 210 G EnSACo® 250 G EnSACo® 260 G EnSACo® 350 G
Form Granules (*) Granules Granules (*) Granules Granules
BET nitrogen Surface Area
ASTM D3037
oAn
Absorption
ASTM D2414 (1)
CoAn Crushed oAn
ASTM D2414 (1)
pour density
ASTM D1513
Moisture (as packed)
ASTM D1509
Sieve residue
325 mesh (45 μm)
ASTM D1514
Ash Content
ASTM D1506
volatile Content
TIMCAL Method 02 (2)
Sulphur Content
ASTM D1619
Toluene Extract
ASTM D4527
pH
ASTM D1512
volume Resistivity
TIMCAL Method 11 (3) (4)
(1) Spring: 0.9 lbs/inch; 10 g of carbon black
(2) Weight loss during heating between 105 and 950°C
(3) 25% carbon black in HDPE Finathene 47100
(4) 15% carbon black in HDPE Finathene 47100
(*) ENSACO® 150 and ENSACO® 250 are also available in powder form.
m 2 /g 50 55 65 70 770
ml/100 g 165 155 190 190 320
ml/100 g 95 95 104 104 270
kg/m 3 190 210 170 170 135
% 0.1 0.1 0.1 0.1 1 max
ppm 2 2 2 2 10
% 0.1 0.1 0.01 0.01 0.03
% 0.2 max 0.2 max 0.2 max 0.2 max 0.3 max
% 0.5 max 0.5 max 0.02 0.02 0.02
% 0.1 max 0.1 max 0.1 max 0.1 max 0.1 max
8–11 8–11 8–11 8–11 8–11
Ohm.cm 2000 max (3) 500 max (3) 10 max (3) 5 max (3) 20 max (4)